From 5fd83771641d15c418f747bd343ba6738d3875f7 Mon Sep 17 00:00:00 2001 From: Cameron Katri Date: Sun, 9 May 2021 14:20:58 -0400 Subject: Import macOS userland adv_cmds-176 basic_cmds-55 bootstrap_cmds-116.100.1 developer_cmds-66 diskdev_cmds-667.40.1 doc_cmds-53.60.1 file_cmds-321.40.3 mail_cmds-35 misc_cmds-34 network_cmds-606.40.1 patch_cmds-17 remote_cmds-63 shell_cmds-216.60.1 system_cmds-880.60.2 text_cmds-106 --- file_cmds/pax/tables.c | 1278 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1278 insertions(+) create mode 100644 file_cmds/pax/tables.c (limited to 'file_cmds/pax/tables.c') diff --git a/file_cmds/pax/tables.c b/file_cmds/pax/tables.c new file mode 100644 index 0000000..f45d291 --- /dev/null +++ b/file_cmds/pax/tables.c @@ -0,0 +1,1278 @@ +/* $OpenBSD: tables.c,v 1.25 2007/09/02 15:19:08 deraadt Exp $ */ +/* $NetBSD: tables.c,v 1.4 1995/03/21 09:07:45 cgd Exp $ */ + +/*- + * Copyright (c) 1992 Keith Muller. + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Keith Muller of the University of California, San Diego. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#ifndef lint +#if 0 +static const char sccsid[] = "@(#)tables.c 8.1 (Berkeley) 5/31/93"; +#else +__used static const char rcsid[] = "$OpenBSD: tables.c,v 1.25 2007/09/02 15:19:08 deraadt Exp $"; +#endif +#endif /* not lint */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pax.h" +#include "tables.h" +#include "extern.h" + +/* + * Routines for controlling the contents of all the different databases pax + * keeps. Tables are dynamically created only when they are needed. The + * goal was speed and the ability to work with HUGE archives. The databases + * were kept simple, but do have complex rules for when the contents change. + * As of this writing, the posix library functions were more complex than + * needed for this application (pax databases have very short lifetimes and + * do not survive after pax is finished). Pax is required to handle very + * large archives. These database routines carefully combine memory usage and + * temporary file storage in ways which will not significantly impact runtime + * performance while allowing the largest possible archives to be handled. + * Trying to force the fit to the posix database routines was not considered + * time well spent. + */ + +static HRDLNK **ltab = NULL; /* hard link table for detecting hard links */ +static FTM **ftab = NULL; /* file time table for updating arch */ +static NAMT **ntab = NULL; /* interactive rename storage table */ +static DEVT **dtab = NULL; /* device/inode mapping tables */ +static ATDIR **atab = NULL; /* file tree directory time reset table */ +static DIRDATA *dirp = NULL; /* storage for setting created dir time/mode */ +static size_t dirsize; /* size of dirp table */ +static long dircnt = 0; /* entries in dir time/mode storage */ +static int ffd = -1; /* tmp file for file time table name storage */ + +static DEVT *chk_dev(dev_t, int); + +/* + * hard link table routines + * + * The hard link table tries to detect hard links to files using the device and + * inode values. We do this when writing an archive, so we can tell the format + * write routine that this file is a hard link to another file. The format + * write routine then can store this file in whatever way it wants (as a hard + * link if the format supports that like tar, or ignore this info like cpio). + * (Actually a field in the format driver table tells us if the format wants + * hard link info. if not, we do not waste time looking for them). We also use + * the same table when reading an archive. In that situation, this table is + * used by the format read routine to detect hard links from stored dev and + * inode numbers (like cpio). This will allow pax to create a link when one + * can be detected by the archive format. + */ + +/* + * lnk_start + * Creates the hard link table. + * Return: + * 0 if created, -1 if failure + */ + +int +lnk_start(void) +{ + if (ltab != NULL) + return(0); + if ((ltab = (HRDLNK **)calloc(L_TAB_SZ, sizeof(HRDLNK *))) == NULL) { + paxwarn(1, "Cannot allocate memory for hard link table"); + return(-1); + } + return(0); +} + +/* + * chk_lnk() + * Looks up entry in hard link hash table. If found, it copies the name + * of the file it is linked to (we already saw that file) into ln_name. + * lnkcnt is decremented and if goes to 1 the node is deleted from the + * database. (We have seen all the links to this file). If not found, + * we add the file to the database if it has the potential for having + * hard links to other files we may process (it has a link count > 1) + * Return: + * if found returns 1; if not found returns 0; -1 on error + */ + +int +chk_lnk(ARCHD *arcn) +{ + HRDLNK *pt; + HRDLNK **ppt; + u_int indx; + + if (ltab == NULL) + return(-1); + /* + * ignore those nodes that cannot have hard links + */ + if ((arcn->type == PAX_DIR) || (arcn->sb.st_nlink <= 1)) + return(0); + + /* + * hash inode number and look for this file + */ + indx = ((unsigned)arcn->sb.st_ino) % L_TAB_SZ; + if ((pt = ltab[indx]) != NULL) { + /* + * its hash chain in not empty, walk down looking for it + */ + ppt = &(ltab[indx]); + while (pt != NULL) { + if ((pt->ino == arcn->sb.st_ino) && + (pt->dev == arcn->sb.st_dev)) + break; + ppt = &(pt->fow); + pt = pt->fow; + } + + if (pt != NULL) { + /* + * found a link. set the node type and copy in the + * name of the file it is to link to. we need to + * handle hardlinks to regular files differently than + * other links. + */ + arcn->ln_nlen = strlcpy(arcn->ln_name, pt->name, + sizeof(arcn->ln_name)); + /* XXX truncate? */ + if (arcn->nlen >= sizeof(arcn->name)) + arcn->nlen = sizeof(arcn->name) - 1; + if (arcn->type == PAX_REG) + arcn->type = PAX_HRG; + else + arcn->type = PAX_HLK; + + /* + * if we have found all the links to this file, remove + * it from the database + */ + if (--pt->nlink <= 1) { + *ppt = pt->fow; + (void)free((char *)pt->name); + (void)free((char *)pt); + } + return(1); + } + } + + /* + * we never saw this file before. It has links so we add it to the + * front of this hash chain + */ + if ((pt = (HRDLNK *)malloc(sizeof(HRDLNK))) != NULL) { + if ((pt->name = strdup(arcn->name)) != NULL) { + pt->dev = arcn->sb.st_dev; + pt->ino = arcn->sb.st_ino; + pt->nlink = arcn->sb.st_nlink; + pt->fow = ltab[indx]; + ltab[indx] = pt; + return(0); + } + (void)free((char *)pt); + } + + paxwarn(1, "Hard link table out of memory"); + return(-1); +} + +/* + * purg_lnk + * remove reference for a file that we may have added to the data base as + * a potential source for hard links. We ended up not using the file, so + * we do not want to accidently point another file at it later on. + */ + +void +purg_lnk(ARCHD *arcn) +{ + HRDLNK *pt; + HRDLNK **ppt; + u_int indx; + + if (ltab == NULL) + return; + /* + * do not bother to look if it could not be in the database + */ + if ((arcn->sb.st_nlink <= 1) || (arcn->type == PAX_DIR) || + (arcn->type == PAX_HLK) || (arcn->type == PAX_HRG)) + return; + + /* + * find the hash chain for this inode value, if empty return + */ + indx = ((unsigned)arcn->sb.st_ino) % L_TAB_SZ; + if ((pt = ltab[indx]) == NULL) + return; + + /* + * walk down the list looking for the inode/dev pair, unlink and + * free if found + */ + ppt = &(ltab[indx]); + while (pt != NULL) { + if ((pt->ino == arcn->sb.st_ino) && + (pt->dev == arcn->sb.st_dev)) + break; + ppt = &(pt->fow); + pt = pt->fow; + } + if (pt == NULL) + return; + + /* + * remove and free it + */ + *ppt = pt->fow; + (void)free((char *)pt->name); + (void)free((char *)pt); +} + +/* + * lnk_end() + * pull apart a existing link table so we can reuse it. We do this between + * read and write phases of append with update. (The format may have + * used the link table, and we need to start with a fresh table for the + * write phase + */ + +void +lnk_end(void) +{ + int i; + HRDLNK *pt; + HRDLNK *ppt; + + if (ltab == NULL) + return; + + for (i = 0; i < L_TAB_SZ; ++i) { + if (ltab[i] == NULL) + continue; + pt = ltab[i]; + ltab[i] = NULL; + + /* + * free up each entry on this chain + */ + while (pt != NULL) { + ppt = pt; + pt = ppt->fow; + (void)free((char *)ppt->name); + (void)free((char *)ppt); + } + } + return; +} + +/* + * modification time table routines + * + * The modification time table keeps track of last modification times for all + * files stored in an archive during a write phase when -u is set. We only + * add a file to the archive if it is newer than a file with the same name + * already stored on the archive (if there is no other file with the same + * name on the archive it is added). This applies to writes and appends. + * An append with an -u must read the archive and store the modification time + * for every file on that archive before starting the write phase. It is clear + * that this is one HUGE database. To save memory space, the actual file names + * are stored in a scratch file and indexed by an in-memory hash table. The + * hash table is indexed by hashing the file path. The nodes in the table store + * the length of the filename and the lseek offset within the scratch file + * where the actual name is stored. Since there are never any deletions from + * this table, fragmentation of the scratch file is never a issue. Lookups + * seem to not exhibit any locality at all (files in the database are rarely + * looked up more than once...), so caching is just a waste of memory. The + * only limitation is the amount of scratch file space available to store the + * path names. + */ + +/* + * ftime_start() + * create the file time hash table and open for read/write the scratch + * file. (after created it is unlinked, so when we exit we leave + * no witnesses). + * Return: + * 0 if the table and file was created ok, -1 otherwise + */ + +int +ftime_start(void) +{ + + if (ftab != NULL) + return(0); + if ((ftab = (FTM **)calloc(F_TAB_SZ, sizeof(FTM *))) == NULL) { + paxwarn(1, "Cannot allocate memory for file time table"); + return(-1); + } + + /* + * get random name and create temporary scratch file, unlink name + * so it will get removed on exit + */ + memcpy(tempbase, _TFILE_BASE, sizeof(_TFILE_BASE)); + if ((ffd = mkstemp(tempfile)) < 0) { + syswarn(1, errno, "Unable to create temporary file: %s", + tempfile); + return(-1); + } + (void)unlink(tempfile); + + return(0); +} + +/* + * chk_ftime() + * looks up entry in file time hash table. If not found, the file is + * added to the hash table and the file named stored in the scratch file. + * If a file with the same name is found, the file times are compared and + * the most recent file time is retained. If the new file was younger (or + * was not in the database) the new file is selected for storage. + * Return: + * 0 if file should be added to the archive, 1 if it should be skipped, + * -1 on error + */ + +int +chk_ftime(ARCHD *arcn) +{ + FTM *pt; + int namelen; + u_int indx; + char ckname[PAXPATHLEN+1]; + + /* + * no info, go ahead and add to archive + */ + if (ftab == NULL) + return(0); + + /* + * hash the pathname and look up in table + */ + namelen = arcn->nlen; + indx = st_hash(arcn->name, namelen, F_TAB_SZ); + if ((pt = ftab[indx]) != NULL) { + /* + * the hash chain is not empty, walk down looking for match + * only read up the path names if the lengths match, speeds + * up the search a lot + */ + while (pt != NULL) { + if (pt->namelen == namelen) { + /* + * potential match, have to read the name + * from the scratch file. + */ + if (lseek(ffd,pt->seek,SEEK_SET) != pt->seek) { + syswarn(1, errno, + "Failed ftime table seek"); + return(-1); + } + if (read(ffd, ckname, namelen) != namelen) { + syswarn(1, errno, + "Failed ftime table read"); + return(-1); + } + + /* + * if the names match, we are done + */ + if (!strncmp(ckname, arcn->name, namelen)) + break; + } + + /* + * try the next entry on the chain + */ + pt = pt->fow; + } + + if (pt != NULL) { + /* + * found the file, compare the times, save the newer + */ + if (arcn->sb.st_mtime > pt->mtime) { + /* + * file is newer + */ + pt->mtime = arcn->sb.st_mtime; + return(0); + } + /* + * file is older + */ + return(1); + } + } + + /* + * not in table, add it + */ + if ((pt = (FTM *)malloc(sizeof(FTM))) != NULL) { + /* + * add the name at the end of the scratch file, saving the + * offset. add the file to the head of the hash chain + */ + if ((pt->seek = lseek(ffd, (off_t)0, SEEK_END)) >= 0) { + if (write(ffd, arcn->name, namelen) == namelen) { + pt->mtime = arcn->sb.st_mtime; + pt->namelen = namelen; + pt->fow = ftab[indx]; + ftab[indx] = pt; + return(0); + } + syswarn(1, errno, "Failed write to file time table"); + } else + syswarn(1, errno, "Failed seek on file time table"); + } else + paxwarn(1, "File time table ran out of memory"); + + if (pt != NULL) + (void)free((char *)pt); + return(-1); +} + +/* + * Interactive rename table routines + * + * The interactive rename table keeps track of the new names that the user + * assigns to files from tty input. Since this map is unique for each file + * we must store it in case there is a reference to the file later in archive + * (a link). Otherwise we will be unable to find the file we know was + * extracted. The remapping of these files is stored in a memory based hash + * table (it is assumed since input must come from /dev/tty, it is unlikely to + * be a very large table). + */ + +/* + * name_start() + * create the interactive rename table + * Return: + * 0 if successful, -1 otherwise + */ + +int +name_start(void) +{ + if (ntab != NULL) + return(0); + if ((ntab = (NAMT **)calloc(N_TAB_SZ, sizeof(NAMT *))) == NULL) { + paxwarn(1, "Cannot allocate memory for interactive rename table"); + return(-1); + } + return(0); +} + +/* + * add_name() + * add the new name to old name mapping just created by the user. + * If an old name mapping is found (there may be duplicate names on an + * archive) only the most recent is kept. + * Return: + * 0 if added, -1 otherwise + */ + +int +add_name(char *oname, int onamelen, char *nname) +{ + NAMT *pt; + u_int indx; + + if (ntab == NULL) { + /* + * should never happen + */ + paxwarn(0, "No interactive rename table, links may fail"); + return(0); + } + + /* + * look to see if we have already mapped this file, if so we + * will update it + */ + indx = st_hash(oname, onamelen, N_TAB_SZ); + if ((pt = ntab[indx]) != NULL) { + /* + * look down the has chain for the file + */ + while ((pt != NULL) && (strcmp(oname, pt->oname) != 0)) + pt = pt->fow; + + if (pt != NULL) { + /* + * found an old mapping, replace it with the new one + * the user just input (if it is different) + */ + if (strcmp(nname, pt->nname) == 0) + return(0); + + (void)free((char *)pt->nname); + if ((pt->nname = strdup(nname)) == NULL) { + paxwarn(1, "Cannot update rename table"); + return(-1); + } + return(0); + } + } + + /* + * this is a new mapping, add it to the table + */ + if ((pt = (NAMT *)malloc(sizeof(NAMT))) != NULL) { + if ((pt->oname = strdup(oname)) != NULL) { + if ((pt->nname = strdup(nname)) != NULL) { + pt->fow = ntab[indx]; + ntab[indx] = pt; + return(0); + } + (void)free((char *)pt->oname); + } + (void)free((char *)pt); + } + paxwarn(1, "Interactive rename table out of memory"); + return(-1); +} + +/* + * sub_name() + * look up a link name to see if it points at a file that has been + * remapped by the user. If found, the link is adjusted to contain the + * new name (oname is the link to name) + */ + +void +sub_name(char *oname, int *onamelen, size_t onamesize) +{ + NAMT *pt; + u_int indx; + + if (ntab == NULL) + return; + /* + * look the name up in the hash table + */ + indx = st_hash(oname, *onamelen, N_TAB_SZ); + if ((pt = ntab[indx]) == NULL) + return; + + while (pt != NULL) { + /* + * walk down the hash chain looking for a match + */ + if (strcmp(oname, pt->oname) == 0) { + /* + * found it, replace it with the new name + * and return (we know that oname has enough space) + */ + *onamelen = strlcpy(oname, pt->nname, onamesize); + if (*onamelen >= onamesize) + *onamelen = onamesize - 1; /* XXX truncate? */ + return; + } + pt = pt->fow; + } + + /* + * no match, just return + */ + return; +} + +/* + * device/inode mapping table routines + * (used with formats that store device and inodes fields) + * + * device/inode mapping tables remap the device field in a archive header. The + * device/inode fields are used to determine when files are hard links to each + * other. However these values have very little meaning outside of that. This + * database is used to solve one of two different problems. + * + * 1) when files are appended to an archive, while the new files may have hard + * links to each other, you cannot determine if they have hard links to any + * file already stored on the archive from a prior run of pax. We must assume + * that these inode/device pairs are unique only within a SINGLE run of pax + * (which adds a set of files to an archive). So we have to make sure the + * inode/dev pairs we add each time are always unique. We do this by observing + * while the inode field is very dense, the use of the dev field is fairly + * sparse. Within each run of pax, we remap any device number of a new archive + * member that has a device number used in a prior run and already stored in a + * file on the archive. During the read phase of the append, we store the + * device numbers used and mark them to not be used by any file during the + * write phase. If during write we go to use one of those old device numbers, + * we remap it to a new value. + * + * 2) Often the fields in the archive header used to store these values are + * too small to store the entire value. The result is an inode or device value + * which can be truncated. This really can foul up an archive. With truncation + * we end up creating links between files that are really not links (after + * truncation the inodes are the same value). We address that by detecting + * truncation and forcing a remap of the device field to split truncated + * inodes away from each other. Each truncation creates a pattern of bits that + * are removed. We use this pattern of truncated bits to partition the inodes + * on a single device to many different devices (each one represented by the + * truncated bit pattern). All inodes on the same device that have the same + * truncation pattern are mapped to the same new device. Two inodes that + * truncate to the same value clearly will always have different truncation + * bit patterns, so they will be split from away each other. When we spot + * device truncation we remap the device number to a non truncated value. + * (for more info see table.h for the data structures involved). + */ + +/* + * dev_start() + * create the device mapping table + * Return: + * 0 if successful, -1 otherwise + */ + +int +dev_start(void) +{ + if (dtab != NULL) + return(0); + if ((dtab = (DEVT **)calloc(D_TAB_SZ, sizeof(DEVT *))) == NULL) { + paxwarn(1, "Cannot allocate memory for device mapping table"); + return(-1); + } + return(0); +} + +/* + * add_dev() + * add a device number to the table. this will force the device to be + * remapped to a new value if it be used during a write phase. This + * function is called during the read phase of an append to prohibit the + * use of any device number already in the archive. + * Return: + * 0 if added ok, -1 otherwise + */ + +int +add_dev(ARCHD *arcn) +{ + if (chk_dev(arcn->sb.st_dev, 1) == NULL) + return(-1); + return(0); +} + +/* + * chk_dev() + * check for a device value in the device table. If not found and the add + * flag is set, it is added. This does NOT assign any mapping values, just + * adds the device number as one that need to be remapped. If this device + * is already mapped, just return with a pointer to that entry. + * Return: + * pointer to the entry for this device in the device map table. Null + * if the add flag is not set and the device is not in the table (it is + * not been seen yet). If add is set and the device cannot be added, null + * is returned (indicates an error). + */ + +static DEVT * +chk_dev(dev_t dev, int add) +{ + DEVT *pt; + u_int indx; + + if (dtab == NULL) + return(NULL); + /* + * look to see if this device is already in the table + */ + indx = ((unsigned)dev) % D_TAB_SZ; + if ((pt = dtab[indx]) != NULL) { + while ((pt != NULL) && (pt->dev != dev)) + pt = pt->fow; + + /* + * found it, return a pointer to it + */ + if (pt != NULL) + return(pt); + } + + /* + * not in table, we add it only if told to as this may just be a check + * to see if a device number is being used. + */ + if (add == 0) + return(NULL); + + /* + * allocate a node for this device and add it to the front of the hash + * chain. Note we do not assign remaps values here, so the pt->list + * list must be NULL. + */ + if ((pt = (DEVT *)malloc(sizeof(DEVT))) == NULL) { + paxwarn(1, "Device map table out of memory"); + return(NULL); + } + pt->dev = dev; + pt->list = NULL; + pt->fow = dtab[indx]; + dtab[indx] = pt; + return(pt); +} +/* + * map_dev() + * given an inode and device storage mask (the mask has a 1 for each bit + * the archive format is able to store in a header), we check for inode + * and device truncation and remap the device as required. Device mapping + * can also occur when during the read phase of append a device number was + * seen (and was marked as do not use during the write phase). WE ASSUME + * that unsigned longs are the same size or bigger than the fields used + * for ino_t and dev_t. If not the types will have to be changed. + * Return: + * 0 if all ok, -1 otherwise. + */ + +int +map_dev(ARCHD *arcn, u_long dev_mask, u_long ino_mask) +{ + DEVT *pt; + DLIST *dpt; + static dev_t lastdev = 0; /* next device number to try */ + int trc_ino = 0; + int trc_dev = 0; + ino_t trunc_bits = 0; + ino_t nino; + + if (dtab == NULL) + return(0); + /* + * check for device and inode truncation, and extract the truncated + * bit pattern. + */ + if ((arcn->sb.st_dev & (dev_t)dev_mask) != arcn->sb.st_dev) + ++trc_dev; + if ((nino = arcn->sb.st_ino & (ino_t)ino_mask) != arcn->sb.st_ino) { + ++trc_ino; + trunc_bits = arcn->sb.st_ino & (ino_t)(~ino_mask); + } + + /* + * see if this device is already being mapped, look up the device + * then find the truncation bit pattern which applies + */ + if ((pt = chk_dev(arcn->sb.st_dev, 0)) != NULL) { + /* + * this device is already marked to be remapped + */ + for (dpt = pt->list; dpt != NULL; dpt = dpt->fow) + if (dpt->trunc_bits == trunc_bits) + break; + + if (dpt != NULL) { + /* + * we are being remapped for this device and pattern + * change the device number to be stored and return + */ + arcn->sb.st_dev = dpt->dev; + arcn->sb.st_ino = nino; + return(0); + } + } else { + /* + * this device is not being remapped YET. if we do not have any + * form of truncation, we do not need a remap + */ + if (!trc_ino && !trc_dev) + return(0); + + /* + * we have truncation, have to add this as a device to remap + */ + if ((pt = chk_dev(arcn->sb.st_dev, 1)) == NULL) + goto bad; + + /* + * if we just have a truncated inode, we have to make sure that + * all future inodes that do not truncate (they have the + * truncation pattern of all 0's) continue to map to the same + * device number. We probably have already written inodes with + * this device number to the archive with the truncation + * pattern of all 0's. So we add the mapping for all 0's to the + * same device number. + */ + if (!trc_dev && (trunc_bits != 0)) { + if ((dpt = (DLIST *)malloc(sizeof(DLIST))) == NULL) + goto bad; + dpt->trunc_bits = 0; + dpt->dev = arcn->sb.st_dev; + dpt->fow = pt->list; + pt->list = dpt; + } + } + + /* + * look for a device number not being used. We must watch for wrap + * around on lastdev (so we do not get stuck looking forever!) + */ + while (++lastdev > 0) { + if (chk_dev(lastdev, 0) != NULL) + continue; + /* + * found an unused value. If we have reached truncation point + * for this format we are hosed, so we give up. Otherwise we + * mark it as being used. + */ + if (((lastdev & ((dev_t)dev_mask)) != lastdev) || + (chk_dev(lastdev, 1) == NULL)) + goto bad; + break; + } + + if ((lastdev <= 0) || ((dpt = (DLIST *)malloc(sizeof(DLIST))) == NULL)) + goto bad; + + /* + * got a new device number, store it under this truncation pattern. + * change the device number this file is being stored with. + */ + dpt->trunc_bits = trunc_bits; + dpt->dev = lastdev; + dpt->fow = pt->list; + pt->list = dpt; + arcn->sb.st_dev = lastdev; + arcn->sb.st_ino = nino; + return(0); + + bad: + paxwarn(1, "Unable to fix truncated inode/device field when storing %s", + arcn->name); + paxwarn(0, "Archive may create improper hard links when extracted"); + return(0); +} + +/* + * directory access/mod time reset table routines (for directories READ by pax) + * + * The pax -t flag requires that access times of archive files be the same + * before being read by pax. For regular files, access time is restored after + * the file has been copied. This database provides the same functionality for + * directories read during file tree traversal. Restoring directory access time + * is more complex than files since directories may be read several times until + * all the descendants in their subtree are visited by fts. Directory access + * and modification times are stored during the fts pre-order visit (done + * before any descendants in the subtree are visited) and restored after the + * fts post-order visit (after all the descendants have been visited). In the + * case of premature exit from a subtree (like from the effects of -n), any + * directory entries left in this database are reset during final cleanup + * operations of pax. Entries are hashed by inode number for fast lookup. + */ + +/* + * atdir_start() + * create the directory access time database for directories READ by pax. + * Return: + * 0 is created ok, -1 otherwise. + */ + +int +atdir_start(void) +{ + if (atab != NULL) + return(0); + if ((atab = (ATDIR **)calloc(A_TAB_SZ, sizeof(ATDIR *))) == NULL) { + paxwarn(1,"Cannot allocate space for directory access time table"); + return(-1); + } + return(0); +} + + +/* + * atdir_end() + * walk through the directory access time table and reset the access time + * of any directory who still has an entry left in the database. These + * entries are for directories READ by pax + */ + +void +atdir_end(void) +{ + ATDIR *pt; + int i; + + if (atab == NULL) + return; + /* + * for each non-empty hash table entry reset all the directories + * chained there. + */ + for (i = 0; i < A_TAB_SZ; ++i) { + if ((pt = atab[i]) == NULL) + continue; + /* + * remember to force the times, set_ftime() looks at pmtime + * and patime, which only applies to things CREATED by pax, + * not read by pax. Read time reset is controlled by -t. + */ + for (; pt != NULL; pt = pt->fow) + set_ftime(pt->name, pt->mtime, pt->atime, 1); + } +} + +/* + * add_atdir() + * add a directory to the directory access time table. Table is hashed + * and chained by inode number. This is for directories READ by pax + */ + +void +add_atdir(char *fname, dev_t dev, ino_t ino, time_t mtime, time_t atime) +{ + ATDIR *pt; + u_int indx; + + if (atab == NULL) + return; + + /* + * make sure this directory is not already in the table, if so just + * return (the older entry always has the correct time). The only + * way this will happen is when the same subtree can be traversed by + * different args to pax and the -n option is aborting fts out of a + * subtree before all the post-order visits have been made. + */ + indx = ((unsigned)ino) % A_TAB_SZ; + if ((pt = atab[indx]) != NULL) { + while (pt != NULL) { + if ((pt->ino == ino) && (pt->dev == dev)) + break; + pt = pt->fow; + } + + /* + * oops, already there. Leave it alone. + */ + if (pt != NULL) + return; + } + + /* + * add it to the front of the hash chain + */ + if ((pt = (ATDIR *)malloc(sizeof(ATDIR))) != NULL) { + if ((pt->name = strdup(fname)) != NULL) { + pt->dev = dev; + pt->ino = ino; + pt->mtime = mtime; + pt->atime = atime; + pt->fow = atab[indx]; + atab[indx] = pt; + return; + } + (void)free((char *)pt); + } + + paxwarn(1, "Directory access time reset table ran out of memory"); + return; +} + +/* + * get_atdir() + * look up a directory by inode and device number to obtain the access + * and modification time you want to set to. If found, the modification + * and access time parameters are set and the entry is removed from the + * table (as it is no longer needed). These are for directories READ by + * pax + * Return: + * 0 if found, -1 if not found. + */ + +int +get_atdir(dev_t dev, ino_t ino, time_t *mtime, time_t *atime) +{ + ATDIR *pt; + ATDIR **ppt; + u_int indx; + + if (atab == NULL) + return(-1); + /* + * hash by inode and search the chain for an inode and device match + */ + indx = ((unsigned)ino) % A_TAB_SZ; + if ((pt = atab[indx]) == NULL) + return(-1); + + ppt = &(atab[indx]); + while (pt != NULL) { + if ((pt->ino == ino) && (pt->dev == dev)) + break; + /* + * no match, go to next one + */ + ppt = &(pt->fow); + pt = pt->fow; + } + + /* + * return if we did not find it. + */ + if (pt == NULL) + return(-1); + + /* + * found it. return the times and remove the entry from the table. + */ + *ppt = pt->fow; + *mtime = pt->mtime; + *atime = pt->atime; + (void)free((char *)pt->name); + (void)free((char *)pt); + return(0); +} + +/* + * directory access mode and time storage routines (for directories CREATED + * by pax). + * + * Pax requires that extracted directories, by default, have their access/mod + * times and permissions set to the values specified in the archive. During the + * actions of extracting (and creating the destination subtree during -rw copy) + * directories extracted may be modified after being created. Even worse is + * that these directories may have been created with file permissions which + * prohibits any descendants of these directories from being extracted. When + * directories are created by pax, access rights may be added to permit the + * creation of files in their subtree. Every time pax creates a directory, the + * times and file permissions specified by the archive are stored. After all + * files have been extracted (or copied), these directories have their times + * and file modes reset to the stored values. The directory info is restored in + * reverse order as entries were added to the data file from root to leaf. To + * restore atime properly, we must go backwards. The data file consists of + * records with two parts, the file name followed by a DIRDATA trailer. The + * fixed sized trailer contains the size of the name plus the off_t location in + * the file. To restore we work backwards through the file reading the trailer + * then the file name. + */ + +/* + * dir_start() + * set up the directory time and file mode storage for directories CREATED + * by pax. + * Return: + * 0 if ok, -1 otherwise + */ + +int +dir_start(void) +{ + if (dirp != NULL) + return(0); + + dirsize = DIRP_SIZE; + if ((dirp = calloc(dirsize, sizeof(DIRDATA))) == NULL) { + paxwarn(1, "Unable to allocate memory for directory times"); + return(-1); + } + return(0); +} + +/* + * add_dir() + * add the mode and times for a newly CREATED directory + * name is name of the directory, psb the stat buffer with the data in it, + * frc_mode is a flag that says whether to force the setting of the mode + * (ignoring the user set values for preserving file mode). Frc_mode is + * for the case where we created a file and found that the resulting + * directory was not writeable and the user asked for file modes to NOT + * be preserved. (we have to preserve what was created by default, so we + * have to force the setting at the end. this is stated explicitly in the + * pax spec) + */ + +void +add_dir(char *name, size_t nlen, struct stat *psb, int frc_mode) +{ + DIRDATA *dblk; + char realname[MAXPATHLEN], *rp; + + if (dirp == NULL) + return; + + if (havechd && *name != '/') { + if ((rp = realpath(name, realname)) == NULL) { + paxwarn(1, "Cannot canonicalize %s", name); + return; + } + name = rp; + } + if (dircnt == dirsize) { + dblk = realloc(dirp, 2 * dirsize * sizeof(DIRDATA)); + if (dblk == NULL) { + paxwarn(1, "Unable to store mode and times for created" + " directory: %s", name); + return; + } + dirp = dblk; + dirsize *= 2; + } + dblk = &dirp[dircnt]; + if ((dblk->name = strdup(name)) == NULL) { + paxwarn(1, "Unable to store mode and times for created" + " directory: %s", name); + return; + } + dblk->mode = psb->st_mode & 0xffff; + dblk->mtime = psb->st_mtime; + dblk->atime = psb->st_atime; + dblk->frc_mode = frc_mode; + ++dircnt; +} + +/* + * proc_dir() + * process all file modes and times stored for directories CREATED + * by pax + */ + +void +proc_dir(void) +{ + DIRDATA *dblk; + long cnt; + + if (dirp == NULL) + return; + /* + * read backwards through the file and process each directory + */ + cnt = dircnt; + while (--cnt >= 0) { + /* + * frc_mode set, make sure we set the file modes even if + * the user didn't ask for it (see file_subs.c for more info) + */ + dblk = &dirp[cnt]; + if (pmode || dblk->frc_mode) + set_pmode(dblk->name, dblk->mode); + if (patime || pmtime) + set_ftime(dblk->name, dblk->mtime, dblk->atime, 0); + free(dblk->name); + } + + free(dirp); + dirp = NULL; + dircnt = 0; +} + +/* + * database independent routines + */ + +/* + * st_hash() + * hashes filenames to a u_int for hashing into a table. Looks at the tail + * end of file, as this provides far better distribution than any other + * part of the name. For performance reasons we only care about the last + * MAXKEYLEN chars (should be at LEAST large enough to pick off the file + * name). Was tested on 500,000 name file tree traversal from the root + * and gave almost a perfectly uniform distribution of keys when used with + * prime sized tables (MAXKEYLEN was 128 in test). Hashes (sizeof int) + * chars at a time and pads with 0 for last addition. + * Return: + * the hash value of the string MOD (%) the table size. + */ + +u_int +st_hash(char *name, int len, int tabsz) +{ + char *pt; + char *dest; + char *end; + int i; + u_int key = 0; + int steps; + int res; + u_int val = 0; + + /* + * only look at the tail up to MAXKEYLEN, we do not need to waste + * time here (remember these are pathnames, the tail is what will + * spread out the keys) + */ + if (len > MAXKEYLEN) { + pt = &(name[len - MAXKEYLEN]); + len = MAXKEYLEN; + } else + pt = name; + + /* + * calculate the number of u_int size steps in the string and if + * there is a runt to deal with + */ + steps = len/sizeof(u_int); + res = len % sizeof(u_int); + + /* + * add up the value of the string in unsigned integer sized pieces + * too bad we cannot have unsigned int aligned strings, then we + * could avoid the expensive copy. + */ + for (i = 0; i < steps; ++i) { + end = pt + sizeof(u_int); + dest = (char *)&val; + while (pt < end) + *dest++ = *pt++; + key += val; + } + + /* + * add in the runt padded with zero to the right + */ + if (res) { + val = 0; + end = pt + res; + dest = (char *)&val; + while (pt < end) + *dest++ = *pt++; + key += val; + } + + /* + * return the result mod the table size + */ + return(key % tabsz); +} -- cgit v1.2.3-56-ge451