************************************************************************
* Official mandoc TODO.
-* $Id: TODO,v 1.181 2014/10/10 08:44:24 kristaps Exp $
+* $Id: TODO,v 1.319 2021/09/21 17:58:13 schwarze Exp $
************************************************************************
+Many issues are annotated for difficulty as follows:
+
+ - loc = locality of the issue
+ * single file issue, affects file only, or very few
+ ** single module issue, affects several files of one module
+ *** cross-module issue, significantly impacts multiple modules
+ and may require substantial changes to internal interfaces
+ - exist = difficulty of the existing code in this area
+ * affected code is straightforward and easy to read and change
+ ** affected code is somewhat complex, but once you understand
+ the design, not particularly difficult to understand
+ *** affected code uses a special, exceptionally tricky design
+ - algo = difficulty of the new algorithm to be written
+ * the required logic and code is straightforward
+ ** the required logic is somewhat complex and needs a careful design
+ *** the required logic is exceptionally tricky,
+ maybe an approach to solve that is not even known yet
+ - size = the amount of code to be written or changed
+ * a small number of lines (at most 100, usually much less)
+ ** a considerable amount of code (several dozen to a few hundred)
+ *** a large amount of code (many hundreds, maybe thousands)
+ - imp = importance of the issue
+ * mostly for completeness
+ ** would be nice to have
+ *** issue causes considerable inconvenience
+
+Obviously, as the issues have not been solved yet, these annotations
+are mere guesses, and some may be wrong.
+
************************************************************************
-* crashes
+* assertion failures
************************************************************************
-- The abort() in bufcat(), html.c, can be triggered via buffmt_includes()
- by running -Thtml -Oincludes on a file containing a long .In argument.
- Fixing this will probably require reworking the whole bufcat() concept.
+- .if n .ce in the middle of .TS data
+ afl case f1/id:000103,sig:06,src:009024+009105,op:splice,rep:2 (jes@)
+ While roff_parseln() prevents .ce and similar requests in the middle
+ of a tbl, the guard is no longer effective when the .ce is wrapped
+ in a roff block, for example a conditional. The resulting assertion
+ has never been seen in any real-world manual page.
+ This is too dangerous to fix before release because it requires
+ reorganizing the very delicate internals of roff_parseln(),
+ which risks causing more severe bugs.
+ loc * exist *** algo *** size * imp *
+
+
+************************************************************************
+* bugs: invalid output
+************************************************************************
+
+- wrong number of layout columns in tbl(7) code generated by -T man
+ https://savannah.gnu.org/bugs/?57720
+ The reason likely is that tbl(7) does not support the -Bl -column
+ feature of not explicitly specifying the last table column.
+ loc ** exist * algo ** size * imp ***
+
+- eqn(7) delimiters cause conditional lines to misbehave
+ nabijaczleweli 8 Sep 2021 15:24:48 +0200
+ loc * exist *** algo *** size * imp *
+
+- roff.c, roff_expand() should not remove blanks before comments
+ to Oliver Corff, Sep 7, 2021
+ loc * exist * algo * size * imp *
+ but watch out for regressions in the high-level parsers
+ maybe it should not even remove comments? - consider T{\"
+
************************************************************************
* missing features
.na -- temporarily disable adjustment without changing the mode
.ad -- re-enable adjustment without changing the mode
Adjustment mode is ignored while in no-fill mode (.nf).
+ loc *** exist *** algo ** size ** imp ** (parser reorg would help)
- .fc (field control)
found by naddy@ in xloadimage(1)
-
-- .nr third argument (auto-increment step size, requires \n+)
- found by bentley@ in sbcl(1) Mon, 9 Dec 2013 18:36:57 -0700
+ loc ** exist *** algo * size * imp *
- .ns (no-space mode) occurs in xine-config(1)
+ when implementing this, also let .TH set it
reported by brad@ Sat, 15 Jan 2011 15:45:23 -0500
+ loc *** exist *** algo *** size ** imp *
-- .ta (tab settings) occurs in ircbug(1) and probably gnats(1)
- reported by brad@ Sat, 15 Jan 2011 15:50:51 -0500
- also Tcl_NewStringObj(3) via wiz@ Wed, 5 Mar 2014 22:27:43 +0100
-
-- .ti (temporary indent)
- found by naddy@ in xloadimage(1)
- found by bentley@ in nmh(1) Mon, 23 Apr 2012 13:38:28 -0600
-
-- .while and .shift
- found by jca@ in ratpoison(1) Sun, 30 Jun 2013 12:01:09 +0200
-
-- \c (interrupted text) should prevent the line break
- even inside .Bd literal; that occurs in chat(8)
- also found in cclive(1) - DocBook output
-
-- \h horizontal move
- found in cclive(1) DocBook output
- Anthony J. Bentley on discuss@ Sat, 21 Sep 2013 22:29:34 -0600
-
-- \n+ and \n- numerical register increment and decrement
- found by bentley@ in sbcl(1) Mon, 9 Dec 2013 18:36:57 -0700
-
-- \w'' width measurements
+- \w'' improve width measurements
would not be very useful without an expression parser, see below
needed for Tcl_NewStringObj(3) via wiz@ Wed, 5 Mar 2014 22:27:43 +0100
-
-- using undefined strings or macros defines them to be empty
- wl@ Mon, 14 Nov 2011 14:37:01 +0000
+ loc ** exist *** algo *** size * imp ***
+
+- .als only works for macros in mandoc, not for user-defined strings.
+ Also, the "val" field in struct roffkv would have to be replaced
+ with a pointer to a reference-counted wrapper, and an alias
+ would have to point to the same wrapper as the original.
+ .als to undefined does nothing; the alias is not created.
+ .rm'ing the original leaves the alias to point to the old value.
+ .de .als .de changes both, but
+ .de .als .rm .de only changes the new value, not the alias.
+ Found in groffer(1) version 1.19
+ Jan Stary 20 Apr 2019 20:16:54 +0200
+ loc * exist ** algo ** size ** imp *
+
+- roff string condition comparisons fail when vars contain quotes:
+ .ds s '
+ .if '\*s'' \&...
+ hard to fix because of the basic architecture (string replacement
+ happens before roff(7) syntax parsing)
+ Found in groffer(1) version 1.19
+ Jan Stary 20 Apr 2019 20:16:54 +0200
+ loc * exist *** algo *** size ** imp *
+
+- mandoc replaces all ASCII control characters except tab and line feed
+ with '?' during input. It would be better to replace them with
+ Unicode escapes in preconv_encode() or somewhere in the vicinity,
+ such that the already existing better replacement strings show
+ up in the output. Emulating groff is not desirable: groff replaces
+ 0x00, 0x0b, and 0x0d to 0x1f with the empty string (bad because
+ that's easy to overlook for the document author), 0x01 with '.'
+ (very confusing), and passes through 0x02 to 0x08, 0x0c, and 0x7f
+ raw (bad because that is insecure output). Remember that 0x07 may
+ need special handling because it is sometimes used for certain
+ delimiters, so it may need handling *after* roff.c rather than before.
+ reminded by John Gardner 16 Jun 2020 14:26:28 +1000
+ Actually, more ASCII control characters than just 0x07 may need
+ later handling because they can for example be used in macro names.
+ So they may need handling after roff(7) processing.
+ pointed out by John Gardner 23 Jun 2020 18:28:08 +1000
+ more info from John Gardner 29 Jun 2020 19:54:04 +1000
+ loc ** exist ** algo ** size ** imp *
+
+- many missing features used in old groff_char(7),
+ some can possibly be supported
+ kamil at netbsd 12 Nov 2020 17:27:09 +0100 + reply
+
+- \s with arbitrary arg delimiters as already supported for other escapes
+ found following jmc@'s mail 28 Apr 2021 18:31:41 +0100
+ loc * exist * algo * size * imp *
--- missing mdoc features ----------------------------------------------
-- fix bad block nesting involving multiple identical explicit blocks
- see the OpenBSD mdoc_macro.c 1.47 commit message
+- .Sh and .Ss should be parsed and partially callable, see groff_mdoc(7)
+ reed at reedmedia dot net Sat, 21 Dec 2019 17:13:07 -0600
+ loc ** exist ** algo ** size ** imp *
- .Bl -column .Xo support is missing
ultimate goal:
lib/libc/compat-43/sigvec.3
lib/libc/gen/signal.3
lib/libc/sys/sigaction.2
+ loc * exist *** algo *** size * imp **
- edge case: decide how to deal with blk_full bad nesting, e.g.
.Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1)
from jmc@ Wed, 14 Jul 2010 18:10:32 +0100
-
-- \\ is now implemented correctly
- * when defining strings and macros using .ds and .de
- * when parsing roff(7) and man(7) macro arguments
- It does not yet work in mdoc(7) macro arguments
- because libmdoc does not yet use mandoc_getarg().
- Also check what happens in plain text, it must be identical to \e.
-
-- .Bd -centered implies -filled, not -unfilled, which is not
- easy to implement; it requires code similar to .ce, which
- we don't have either.
- Besides, groff has bug causing text right *before* .Bd -centered
- to be centered as well.
+ loc * exist *** algo *** size ** imp **
- .Bd -filled should not be the same as .Bd -ragged, but align both
the left and right margin. In groff, it is implemented in terms
of .ad b, which we don't have either. Found in cksum(1).
+ loc *** exist *** algo ** size ** imp ** (parser reorg would help)
- implement blank `Bl -column', such as
.Bl -column
.It foo Ta bar
.El
+ loc * exist *** algo *** size * imp *
- explicitly disallow nested `Bl -column', which would clobber internal
flags defined for struct mdoc_macro
+ loc * exist * algo * size * imp **
- In .Bl -column .It, the end of the line probably has to be regarded
as an implicit .Ta, if there could be one, see the following mildly
Default search path.
reported by Michal Mazurek <akfaew at jasminek dot net>
via jmc@ Thu, 7 Apr 2011 16:00:53 +0059
+ loc * exist *** algo ** size * imp **
- inside `.Bl -column' phrases, punctuation is handled like normal
text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -."
is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab."
but should give "ab ."
-- set a meaningful default if no `Bl' list type is assigned
-
-- have a blank `It' head for `Bl -tag' not puke
-
-- check whether it is correct that `D1' uses INDENT+1;
- does it need its own constant?
-
- prohibit `Nm' from having non-text HEAD children
(e.g., NetBSD mDNSShared/dns-sd.1)
(mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified)
that one uses NOMBRE because it is spanish...
deraadt tends to think that section-dependent macro behaviour
is a bad idea in the first place, so this may be irrelevant
+ loc ** exist ** algo ** size * imp **
- When there is free text in the SYNOPSIS and that free text contains
the .Nm macro, groff somehow understands to treat the .Nm as an in-line
should be, needs investigation.
uqs@ Thu, 2 Jun 2011 11:03:51 +0200
uqs@ Thu, 2 Jun 2011 11:33:35 +0200
+ loc * exist ** algo *** size * imp **
--- missing man features -----------------------------------------------
-- -T[x]html doesn't stipulate non-collapsing spaces in literal mode
+- MANWIDTH
+ Markus Waldeck <waldeck at gmx dot de> 9 Jun 2015 05:49:56 +0200
+ Laura Morales <lauretas at mail dot com> 26 Apr 2018 08:15:55 +0200
+ Kamil Rytarowski <kamil at netbsd> 13 Nov 2020 00:19:36 +0100
+ patch from Kamil 13 Nov 2020 22:37:07 +0100
+ loc * exist * algo * size * imp *
+
+- groff_www(7) .MTO and .URL
+ These macros were used by the GNU grep(1) man page.
+ The groff_www(7) manual page itself uses them, too.
+ We should probably *not* add them to mandoc.
+ Just mentioning this here to keep track of the abuse.
+ Laura Morales <lauretas at mail dot com> 20 Apr 2018 07:33:02 +0200
+ loc ** exist * algo * size ** imp *
--- missing tbl features -----------------------------------------------
-- look at the POSIX manuals in the books/man-pages-posix port,
- they use some unsupported tbl(7) features.
+- vertical centering in cells vertically spanned with ^
+ pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
+ loc * exist *** algo *** size ** imp *
-- investigate tbl(1) errors in sox(1)
- see also naddy@ Sat, 16 Oct 2010 23:51:57 +0200
+- support mdoc(7) and man(7) macros inside tbl(7) code;
+ probably requires the parser reorg and letting tbl(7)
+ use roff_node such that macro sets can mix;
+ informed by bapt@ that FreeBSD needs this: 3 Jan 2015 23:32:23 +0100
+ loc *** exist ** algo *** size ** imp ***
-- allow standalone `.' to be interpreted as an end-of-layout
- delimiter instead of being thrown away as a no-op roff line
- reported by Yuri Pankov, Wed 18 May 2011 11:34:59 CEST
+- look at the POSIX manuals in the books/man-pages-posix port,
+ they use some unsupported tbl(7) features, mostly macros in tbl(7).
+ loc * exist ** algo ** size ** imp ***
+
+- look what Joerg Schilling manual pages use
+ Thu, 19 Mar 2015 18:31:48 +0100
+
+--- missing eqn features -----------------------------------------------
+
+- In a matrix, break the output line after each matrix line.
+ Found in the discussion at CDBUG 2015. Suggested by Avi Weinstock.
+ This may not be the ideal solution after all: eqn(7) matrices
+ are lists of columns, so Avi's proposal would show each *column*
+ on its own *line*, which is likely to cause confusion.
+ A better solution, but much harder to implement, would be to
+ actually show the coordinates of column vectors on different
+ terminal output lines, using the clumnated output facilities
+ developed for .Bl -tag, .Bl -column, and also used for tbl(7).
+ loc * exist * algo ** size ** imp **
+
+- The "size" keyword is parsed, but ignored by the formatter.
+ loc * exist * algo * size * imp *
+
+- The spacing characters `~', `^', and tab are currently ignored,
+ see User's Guide (Second Edition) page 2 section 4.
+ loc * exist * algo ** size * imp **
+
+- Mark and lineup are parsed and ignored,
+ see User's Guide (Second Edition) page 5 section 15.
+ loc ** exist ** algo ** size ** imp **
+
+- GNU eqn converts some operators to special characters, for example,
+ input HYPHEN-MINUS becomes output \(mi, unless it is part of a
+ quoted word. mandoc(1) only does this when the operator is
+ surrounded by blanks, not when it is part of an unquoted word.
+ Also, check whether there are more such cases (e.g., +?).
+ reported by bentley@ 20 Jun 2017 02:04:29 -0600
+ loc * exist ** algo ** size * imp *
+
+- Primes, opprime, and '
+ bentley@ Thu, 13 Jul 2017 23:14:20 -0600
--- missing misc features ----------------------------------------------
-- italic correction (\/) in PostScript mode
- Werner LEMBERG on groff at gnu dot org Sun, 10 Nov 2013 12:47:46
+- conisder whether man(1) fallback code in main.c/fs_*() can find files
+ like man3c/fopen.3c (illumos, Solaris) and man3p/fopen.3p (POSIX)
+ discussed with Robert Mustacchi 21 Sep 2021 10:39:40 -0700
+ loc * exist * algo ** size * imp **
+
+- let makewhatis(8) follow symbolic links to dirs below READ_ALLOWED_PATH
+ this may be feasible using fts_set(FTS_FOLLOW)
+ mail to sternenseemann 19 Aug 2021 19:11:50 +0200
+ loc * exist ** algo ** size * imp **
-- When makewhatis(8) encounters a FATAL parse error,
- it silently treats the file as formatted, which makes no sense
- at all for paths like man1/foo.1 - and which also contradicts
- what the manual says at the end of the description.
- The end result will be ENOENT for file names returned
- by mansearch() in manpage.file.
+- -T man does not handle eqn(7) and tbl(7)
+ Stephen Gregoratto 16 Feb 2020 01:28:07 +1100
+ also https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=901636
+ loc ** exist ** algo ** size *** imp **
-- makewhatis(8) for preformatted pages:
- parse the section number from the header line
- and compare to the section number from the directory name
+- man -ks 1,8 route; kn@ Jul 13, 2018 orally
+
+- italic correction (\/) in PostScript mode
+ Werner LEMBERG on groff at gnu dot org Sun, 10 Nov 2013 12:47:46
+ loc ** exist ** algo * size * imp *
-- Does makewhatis(8) detect missing NAME sections, missing names,
- and missing descriptions in all the file formats?
+- change the default PAGER to more -Es and use the pager
+ even for apropos title line output; req by bapt@
+ loc * exist * algo * size * imp ***
- clean up escape sequence handling, creating three classes:
(1) fully implemented, or parsed and ignored without loss of content
or serious mangling of formatting (e.g. \n) -> ERROR
see textproc/mgdiff(1) for nice examples
(3) undefined, just output the character -> perhaps WARNING
+ loc *** exist ** algo ** size ** imp *** (parser reorg helps)
- kettenis wants base roff, ms, and me Fri, 1 Jan 2010 22:13:15 +0100 (CET)
+ loc ** exist ** algo ** size *** imp *
--- compatibility checks -----------------------------------------------
- look at AT&T DWB http://www2.research.att.com/sw/download
Carsten Kunze <carsten dot kunze at arcor dot de> has patches
Mon, 4 Aug 2014 17:01:28 +0200
+ ported version: https://github.com/n-t-roff/DWB3.3
+ Carsten Kunze Wed, 22 Apr 2015 11:21:43 +0200
- look at pages generated from reStructeredText, e.g. devel/mercurial hg(1)
These are a weird mixture of man(7) and custom autogenerated low-level
http://swtch.com/plan9port/man/man7/man.html
"Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700
+- check compatibility with COHERENT troff:
+ http://www.nesssoftware.com/home/mwc/source.php
+
- check compatibility with the man(7) formatter
https://raw.githubusercontent.com/rofl0r/hardcore-utils/master/man.c
+- check compatibility with
+ http://ikiwiki.info/plugins/contrib/mandoc/
+ https://github.com/schmonz/ikiwiki/compare/mandoc
+ Amitai Schlair Mon, 19 May 2014 14:05:53 -0400
+
+- check compatibility with
+ https://git.sr.ht/~sircmpwn/scdoc
+
+- check features of the Slackware man.conf(5) format
+ Carsten Kunze Wed, 11 Mar 2015 17:57:24 +0100
+
+- look at http://www.snake.net/software/troffcvt/ (troff to HTML)
+ mentioned by Oliver Corff 22 Jan 2021 01:36:49 +0100
+
+
************************************************************************
* formatting issues: ugly output
************************************************************************
-- a column list with blank `Ta' cells triggers a spurrious
+- revisit empty in-line macros
+ look at the difference between "Em x Em ." and "Sq x Em ."
+ Carsten Kunze Fri, 12 Dec 2014 00:15:41 +0100
+ loc *** exist *** algo *** size * imp **
+
+- a column list with blank `Ta' cells triggers a spurious
start-with-whitespace printing of a newline
+- In .Bl -column, .It a<tab>"b<tab>c"
+ shows the quotes in groff, but not in mandoc
+ loc * exist *** algo ** size * imp **
+
- In .Bl -column,
.It Em Authentication<tab>Key Length
ought to render "Key Length" with emphasis, too,
see OpenBSD iked.conf(5).
reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200
+ loc * exist *** algo *** size ** imp ***
- empty phrases in .Bl column produce too few blanks
try e.g. .Bl -column It Ta Ta
reported by millert Fri, 02 Apr 2010 16:13:46 -0400
+ loc * exist *** algo *** size * imp **
- .%T can have trailing punctuation. Currently, it puts the trailing
punctuation into a trailing MDOC_TEXT element inside its own scope.
slurp all arguments into one single text element - and one feature
of in_line() - put trailing punctuation out of scope.
Found in mount_nfs(8) and exports(5), search for "Appendix".
+ loc ** exist ** algo *** size * imp **
- Trailing punctuation after .%T triggers EOS spacing, at least
outside .Rs (eek!). Simply setting ARGSFL_DELIM for .%T is not
the right solution, it sends mandoc into an endless loop.
reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100
+ loc * exist ** algo ** size * imp **
- global variables in the SYNOPSIS of section 3 pages
.Vt vs .Vt/.Va vs .Ft/.Va vs .Ft/.Fa ...
from kristaps@ Tue, 08 Jun 2010 11:13:32 +0200
+- implicit whitespace around inline equations
+ example code: where '$times$' denotes matrix multiplication
+ must not have an HTML line break, nor a blank, before <math>
+ partial solution: html.c {"math", HTML_NLINSIDE | HTML_INDENT},
+ bentley@ Thu, 13 Jul 2017 19:00:59 -0600
+
- in enclosures, mandoc sometimes fancies a bogus end of sentence
reminded by jmc@ Thu, 23 Sep 2010 18:13:39 +0059
+ loc * exist ** algo *** size * imp ***
+
+- a line starting with "\fB something" counts as starting with whitespace
+ and triggers a line break; found in audio/normalize-mp3(1)
+ This will become easier once escape sequences are represented
+ by syntax tree nodes.
+ loc ** exist * algo ** size * imp **
- formatting /usr/local/man/man1/latex2man.1 with groff and mandoc
reveals lots of bugs both in groff and mandoc...
reported by bentley@ Wed, 22 May 2013 23:49:30 -0600
---- PDF issues ---------------------------------------------------------
+--- PostScript and PDF issues ------------------------------------------
- PDF output doesn't use a monospaced font for .Bd -literal
Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf".
Search the text "Routing tables".
Also check what PostScript mode does when fixing this.
reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200
+ instructions from juanfra@ Wed, 11 Jun 2014 02:21:01 +0200
+ add a new <</Type /Font>> block to the PDF files with /BaseFont /Courier
+ and change the /Name from /F0 to the new font (/F5 (?)).
+ re-reported by tb@ Mon, 16 Mar 2015 16:47:21 +0100
+ loc ** exist ** algo ** size * imp **
--- HTML issues --------------------------------------------------------
-- <dl><dt><dd> formatting is ugly
- hints are easy to find on the web, e.g.
- http://stackoverflow.com/questions/1713048/
- see also matthew@ Fri, 18 Jul 2014 19:25:12 -0700
+- make the HTML scaffolding customozable with -O skip=...
+ mail to Oliver Corff 3 Jun 2021 17:28:02 +0200
+ more feedback from Oliver 3 Jun 2021 18:27:56 +0200
+ more feedback from Oliver 3 Jun 2021 23:37:18 +0200
+
+- .Bd -unfilled should not use monospaced font
+ anton@ 4 Mar 2021 08:19:35 +0100
+ loc ** exist * algo * size * imp **
+
+- HTML formatting of .nf should avoid <br/>
+ and not close and re-open <pre> on .P
+ my mail to ports@ 27 Jun 2021 16:09:20 +0200
+ loc ** exist ** algo * size * imp **
+
+- get rid of the last handful of style= attributes such that
+ Content-Security-Policy: can be enabled without unsafe-inline
+ suggested by bentley@ Nov 10, 2019 at 06:02:49AM -0700
+ loc * exist * algo * size * imp **
+
+- .Bf at the beginning of a paragraph inserts a bogus 1ex horizontal
+ space, see for example random(3). Introduced in
+ http://mdocml.bsd.lv/cgi-bin/cvsweb/mdoc_html.c.diff?r1=1.91&r2=1.92
+ reported by deraadt@ Mon, 28 Sep 2015 20:14:13 -0600 (MDT)
+ loc ** exist ** algo ** size * imp *
+
+- jsg on icb, Nov 3, 2014:
+ try to guess Xr in man(7) for hyperlinking
+ and render them with <a class="Xr" href=...>
+ https://github.com/Debian/debiman/issues/15
+ loc * exist * algo ** size ** imp **
+
+- space characters can end up in href= attributes, for example coming
+ from the first .Xr argument (where they make no sense, but still);
+ does this affect other characters, other source macros...?
+ Jackson Pauls 29 Aug 2017 16:56:27 +0100
- The tables used to render the three-part page headers actually force
the width of the <body> to the max-width given for <html>.
Not yet sure how to fix that...
Observed by an Anonymous Coward on undeadly.org:
http://undeadly.org/cgi?action=article&sid=20140925064244&pid=1
+ loc * exist * algo ** size * imp ***
-- consider whether <var> can be used for Ar Dv Er Ev Fa Va.
- from bentley@ Wed, 13 Aug 2014 09:17:55 -0600
+- generate <img> tags in HTML
+ idea from florian@ Tue, 7 Apr 2015 00:26:28 +0000
+ may be possible to implement with .Lk img://something.png alt_text
- check https://github.com/trentm/mdocml
* formatting issues: gratuitous differences
************************************************************************
-- .Rv (and probably .Ex) print different text if an `Nm' has been named
- or not (run a manual without `Nm blah' to see this). I'm not sure
- that this exists in the wild, but it's still an error.
-
-- In .Bl -bullet, the groff bullet is "+\b+\bo\bo", the mandoc bullet
- is just "o\bo".
- see for example OpenBSD ksh(1)
+- .Fn reopens a new scope after punctuation in mandoc,
+ but closes its scope for good in groff.
+ Do we want to change mandoc or groff?
+ Steffen Nurpmeso Sat, 08 Nov 2014 13:34:59 +0100
+ loc * exist ** algo ** size * imp **
- In .Bl -enum -width 0n, groff continues one the same line after
the number, mandoc breaks the line.
mail to kristaps@ Mon, 20 Jul 2009 02:21:39 +0200
+ loc * exist ** algo ** size * imp **
- .Pp between two .It in .Bl -column should produce one,
not two blank lines, see e.g. login.conf(5).
reported by jmc@ Sun, 17 Apr 2011 14:04:58 +0059
reported again by sthen@ Wed, 18 Jan 2012 02:09:39 +0000 (UTC)
+ loc * exist *** algo ** size * imp **
- If the *first* line after .It is .Pp, break the line right after
the tag, do not pad with space characters before breaking.
See the description of the a, c, and i commands in sed(1).
+ loc * exist ** algo ** size * imp **
- If the first line after .It is .D1, do not assert a blank line
in between, see for example tmux(1).
reported by nicm@ 13 Jan 2011 00:18:57 +0000
+ loc * exist ** algo ** size * imp **
- Trailing punctuation after .It should trigger EOS spacing.
reported by Nicolas Joly Sat, 17 Nov 2012 11:49:54 +0100
Probably, this should be fixed somewhere in termp_it_pre(), not sure.
-
-- .Nx 1.0a
- should be "NetBSD 1.0A", not "NetBSD 1.0a",
- see OpenBSD ccdconfig(8).
-
-- In .Bl -tag, if a tag exceeds the right margin and must be continued
- on the next line, it must be indented by -width, not width+1;
- see "rule block|pass" in OpenBSD ifconfig(8).
+ loc * exist ** algo ** size * imp **
- When the -width string contains macros, the macros must be rendered
before measuring the width, for example
The same applies to .Bl -column column widths;
reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar
reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200
+ reported again by Bruce Evans Fri, 17 Feb 2017 21:22:44 +0100 via bapt@
+ loc *** exist *** algo *** size ** imp ***
An easy partial fix would be to just skip the first word if it starts
with a dot, including any following white space, when measuring.
+ loc * exist * algo * size * imp ***
- The \& zero-width character counts as output.
That is, when it is alone on a line between two .Pp,
we want three blank lines, not two as in mandoc.
+ loc ** exist ** algo ** size * imp **
-- Header lines of excessive length:
- Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c
- and document it in mdoc(7) and man(7) COMPATIBILITY
- found while talking to Chris Bennett
+- Sequences of multiple man(7) paragraphs (.PP, .IP) interspersed
+ with .ps and .nf/.fi produce execessive blank lines, see libJudy
+ and graphics/dcmtk. The parser reorg may help with this.
- trailing whitespace must be ignored even when followed by a font escape,
- see for example
+ see for example
makes
\fBdig \fR
operate in batch mode
in dig(1).
+ loc ** exist ** algo ** size * imp **
************************************************************************
* warning issues
************************************************************************
-- check that MANDOCERR_BADTAB is thrown in the right cases,
- i.e. when finding a literal tab character in fill mode,
- and possibly change the wording of the warning message
- to refer to fill mode, not literal mode
- See the mail from Werner LEMBERG on the groff list,
- Fri, 14 Feb 2014 18:54:42 +0100 (CET)
+- shorten/simplify error messages for usage errors
+ To: deraadt@ 25 Oct 2020 23:37:01 +0100
+ loc ** exist * algo * size ** imp ***
+
+- warn about duplicate .Sh/.Ss heads
+ gre(4): Rename duplicate sections 20 Apr 2018 15:27:33 +0200
+ loc * exist * algo * size * imp **
+
+- style message about macros inside .Bd -literal and .Dl, in particular
+ font changing macros like .Cm, .Ar, .Fa (from the mdoclint TODO)
-- warn about "new sentence, new line"
+- style message about mismatches between the section number in the
+ file name (if it is known) and the section number in .Dt
+ (from the mdoclint TODO)
-- mandoc_special does not really check the escape sequence,
- but just the overall format
+- style message about NULL without .Dv (from the mdoclint TODO)
-- integrate mdoclint into mandoc ("end-of-line whitespace" thread)
- from jmc@ Mon, 13 Jul 2009 17:12:09 +0100
- from kristaps@ Mon, 13 Jul 2009 18:34:53 +0200
- from jmc@ Mon, 13 Jul 2009 17:45:37 +0059
- from kristaps@ Mon, 13 Jul 2009 19:02:03 +0200
+- style message about error constants without .Er (from the mdoclint TODO)
-- -Tlint parser errors and warnings to stdout
- to tech@mdocml, naddy@ Wed, 28 Sep 2011 11:21:46 +0200
- wait! kristaps@ Sun, 02 Oct 2011 17:12:52 +0200
+- warn when .Sh or .Ss contain other macros
+ Steffen Nurpmeso, savannah.gnu.org/bugs/index.php?45034
+ loc * exist * algo * size * imp **
+
+- style message about violations of the convention
+ .An name Aq Mt localpart@domain in AUTHORS (from the mdoclint TODO)
+
+- warn about attempts to call non-callable macros
+ Steffen Nurpmeso Tue, 11 Nov 2014 22:55:16 +0100
+ Note that formatting is inconsistent in groff.
+ .Fn Po prints "Po()", .Ar Sh prints "file ..." and no "Sh".
+ Relatively hard because the relevant code is scattered
+ all over mdoc_macro.c and all subtly different.
+ loc ** exist ** algo ** size ** imp **
+
+- warn about punctuation - e.g. ',' and ';' - at the beginning
+ of a text line, if it is likely intended to follow the preceding
+ output without intervening whitespace, in particular after a
+ macro line (from the mdoclint TODO)
+
+- report double .TH in man(7) as an ERROR and let the first win
+ kristaps@ 28 Mar 2021 13:30:41 +0200
+ loc * exist * algo * size * imp *
+
+- makewhatis -p complains about language subdirectories:
+ /usr/local/man//ru: Unknown directory part
-- for system errors, use errno/strerror/warn/err
************************************************************************
* documentation issues
************************************************************************
-- mention hyphenation rules:
- breaking at letter-letter in text mode (not macro args)
- proper hyphenation is unimplemented
-
-- talk about spacing around delimiters
- to jmc@, kristaps@ Sat, 23 Apr 2011 17:41:27 +0200
-
- mark macros as: page structure domain, manual domain, general text domain
is this useful?
- mention /usr/share/misc/mdoc.template in mdoc(7)?
+- Is all the content from http://www.std.com/obi/BSD/doc/usd/28.tbl/tbl
+ covered in tbl(7)?
+
************************************************************************
* performance issues
************************************************************************
-- Why are we using MAP_SHARED, not MAP_PRIVATE for mmap(2)?
- How does SQLITE_CONFIG_PAGECACHE actually work? Document it!
- from kristaps@ Sat, 09 Aug 2014 13:51:36 +0200
-
-Several areas can be cleaned up to make mandoc even faster. These are
-
-- improve hashing mechanism for macros (quite important: performance)
-
-- improve hashing mechanism for characters (not as important)
-
- the PDF file is HUGE: this can be reduced by using relative offsets
-- instead of re-initialising the roff predefined-strings set before each
- parse, create a read-only version the first time and copy it
-
************************************************************************
* structural issues
************************************************************************
-- We use the input line number at several places to distinguish
- same-line from different-line input. That plainly doesn't work
- with user-defined macros, leading to random breakage.
+- POSIX says in the documentation of sysconf(3) that PATH_MAX
+ is allowed to be so large that it is a bad idea to use it
+ for sizing static buffers. So use dynamic buffers throughout.
+ See the file test-PATH_MAX.c for details.
+ Found by Aaron M. Ucko in the GNU Hurd via Bdale Garbee,
+ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=829624
+
+- Is it possible to further simplify ENDBODY_SPACE?
- Find better ways to prevent endless loops
in roff(7) macro and string expansion.
-
-- Finish cleanup of date handling.
- Decide which formats should be recognized where.
- Update both mdoc(7) and man(7) documentation.
- Triggered by Tim van der Molen Tue, 22 Feb 2011 20:30:45 +0100
-- Consider creating some views that will make the database more
- readable from the sqlite3 shell. Consider using them to
- abstract from the database structure, too.
- suggested by espie@ Sat, 19 Apr 2014 14:52:57 +0200
+- make buffers for parsing functions const
+ christos@ via wiz@ Fri, 18 Dec 2015 17:10:01 +0100
+
+- struct mparse refactoring
+ Steffen Nurpmeso Thu, 04 Sep 2014 12:50:00 +0200
************************************************************************
* CGI issues
************************************************************************
+ - Inspect httpd(8) logs on man.openbsd.org and consider
+ whether logging can be improved, where bad syntax comes from,
+ and what needs to be done to get rid of COMPAT_OLDURI.
- Enable HTTP compression by detecting gzip encoding and filtering
output through libz.
- - Sandbox (see OpenSSH).
+ - Privilege separation (see OpenSSH).
- Enable caching support via HTTP 304 and If-Modified-Since.
- - Allow for cgi.h to be overridden by CGI environment variables.
- Otherwise, binary distributions will inherit the compile-time
- behaviour, which is not optimal.
- - Have Mac OSX systems automatically disable -static compilation of the
- CGI: -static isn't supported.
************************************************************************
-* eqn missing features
+* to improve in the groff_mdoc(7) macros
************************************************************************
- - set, delim, fonts
+- delete OS release verification from .Dx, .Fx, .Nx, .Ox etc.
+ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=629161
+ also Branden Robinson 18 Dec 2019 00:59:52 +1100
+
+- Can the distinction between .Vt and .Va be made stricter,
+ recommending .Vt extern char * Ns Va optarg ; ?
+ What about the block macro properties of .Vt in the SYNOPSIS?
+ zeurkous 25 Dec 2019 08:48:36 +0100
+
+- .Cd # arch1, arch2 in section 4 pages:
+ find better way to indicate multiple architectures, maybe:
+ allow .Dt vgafb 4 "macppc sparc64"
+ already shown as "Device Drivers Manual (macppc sparc64)"
+ for apropos, make that "vgafb(4) - macppc # sparc64" instead of "- all"
+ groff can be made to show multiple arches, too, but it is
+ tedious to do the string parsing in roff code...
+ jmc@ 23 Apr 2018 07:24:52 +0100 [man for vgafb(4)...]
+ loc ** exist ** algo * size * imp ***
+
+- use uname(1) to set doc-default-operating-system at install time
+ tobimensch Mon, 1 Dec 2014 00:25:07 +0100
+
+- apostrophe (39), circumflex (94), grave (96), tilde (126)
+ in manuals: \(aq, \(ha, \`, \(ti
+ Re: [Groff] ASCII Minus Sign in man Pages.
+ bentley@ 26 Apr 2017 10:02:06 -0600
+ Do we need to fix existing manuals?
+ Do we need to fix the definition of the mdoc(7) language?
git.ckatri.com / mandoc.git / blobdiff