Replace the structs mdoc and man by a unified struct roff_man.

[mandoc.git] / configure.local.example

diff --git a/configure.local.example b/configure.local.example
index 037d48a48f99cdfa81e2ff66cad1ca4f5548f97a..3cee71c4306fc0b8cb74dadd99d7197b21772a11 100644 (file)
--- a/configure.local.example
+++ b/configure.local.example
@@ -1,6 +1,6 @@
-# $Id: configure.local.example,v 1.2 2014/12/09 09:14:33 schwarze Exp $
+# $Id: configure.local.example,v 1.8 2015/03/27 00:18:14 schwarze Exp $

 #
 #

-# Copyright (c) 2014 Ingo Schwarze <schwarze@openbsd.org>
+# Copyright (c) 2014, 2015 Ingo Schwarze <schwarze@openbsd.org>

 #
 # Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above
 #
 # Permission to use, copy, modify, and distribute this software for any
 # purpose with or without fee is hereby granted, provided that the above


@@ -48,6 +48,13 @@ HAVE_WCHAR=1
 
 HAVE_WCHAR=0
 
 
 HAVE_WCHAR=0
 

+# When man(1) or apropos(1) is called without -m and -M options,
+# MANPATH is not set in the environment, man.conf(5) is not available
+# and manpath(1) not used, manuals are searched for in the following
+# directory trees by default.
+
+MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
+

 # In manual pages written in the mdoc(7) language, the operating system
 # version is displayed in the page footer line.  If an operating system
 # is specified as an argument to the .Os macro, that is always used.
 # In manual pages written in the mdoc(7) language, the operating system
 # version is displayed in the page footer line.  If an operating system
 # is specified as an argument to the .Os macro, that is always used.


@@ -74,6 +81,26 @@ LIBDIR="${PREFIX}/lib/mandoc"
 MANDIR="${PREFIX}/man"
 EXAMPLEDIR="${PREFIX}/share/examples/mandoc"
 
 MANDIR="${PREFIX}/man"
 EXAMPLEDIR="${PREFIX}/share/examples/mandoc"
 

+# The man(1) utility needs to know where the manuals reside.
+# We know of two ways to tell it: via manpath(1) or man.conf(5).
+# The latter is used by OpenBSD and NetBSD, the former by most
+# other systems.
+
+# Force usage of manpath(1).
+# If it is not installed or not operational,
+# man(1), makewhatis(8), and apropos(1) will not work properly.
+HAVE_MANPATH=1
+
+# Force usage of man.conf(5).
+# If it does not exist or contains no valid configuration,
+# man(1), makewhatis(8), and apropos(1) will not work properly.
+HAVE_MANPATH=0
+
+# Some distributions may want to avoid naming conflicts
+# with the configuration files of other man(1) implementations.
+# This changes the name of the installed section 5 manual page as well.
+MANM_MANCONF="mandoc.conf"     # default is "man.conf"
+

 # Some distributions may want to avoid naming conflicts among manuals.
 # If you want to change the names of installed section 7 manual pages,
 # the following alternative names are suggested.
 # Some distributions may want to avoid naming conflicts among manuals.
 # If you want to change the names of installed section 7 manual pages,
 # the following alternative names are suggested.


@@ -87,6 +114,15 @@ MANM_ROFF="mandoc_roff"             # default is "roff"
 MANM_EQN="mandoc_eqn"          # default is "eqn"
 MANM_TBL="mandoc_tbl"          # default is "tbl"
 
 MANM_EQN="mandoc_eqn"          # default is "eqn"
 MANM_TBL="mandoc_tbl"          # default is "tbl"
 

+# Some distributions may want to avoid naming conflicts
+# with another man(1) utility.
+# If you want to change the name of the binary program,
+# the following alternative name is suggested.
+# Using a different name is possible as well.
+# This changes the name of the installed section 1 manual page as well.
+
+BINM_MAN=mman                  # default is "man"
+

 # It is possible to change the utility program used for installation
 # and the modes files are installed with.  The defaults are:
 
 # It is possible to change the utility program used for installation
 # and the modes files are installed with.  The defaults are:
 


@@ -121,38 +157,29 @@ DBLIB="-L/usr/local/lib -lsqlite3"
 
 CFLAGS="${CFLAGS} -I/usr/local/include"
 
 
 CFLAGS="${CFLAGS} -I/usr/local/include"
 

-# The man(1) utility needs to know where the manuals reside.
-# We know of two ways to tell it: via manpath(1) or man.conf(5).
-# The latter is used by OpenBSD and NetBSD, the former by most
-# other systems.
-
-# Force usage of manpath(1).
-# If it is not installed or not operational,
-# makewhatis(8) and apropos(1) will not work properly.
-
-HAVE_MANPATH=1
-
-# Force usage of man.conf(5).
-# If it does not exist or contains no valid configuration,
-# makewhatis(8) and apropos(1) will not work properly.
-
-HAVE_MANPATH=0
-

 # Some distributions may want to avoid naming conflicts
 # Some distributions may want to avoid naming conflicts

-# with groff, man-db, or other tools.
-# If you want to change the names of binary programs,
+# with another implementation of apropos(1) and makewhatis(8).
+# If you want to change the names of the binary programs,

 # the following alternative names are suggested.
 # Using other names is possible as well.
 # This changes the names of the installed section 1 and section 8
 # manual pages as well.
 # the following alternative names are suggested.
 # Using other names is possible as well.
 # This changes the names of the installed section 1 and section 8
 # manual pages as well.

-# It is possible to set only one or a few of these variables,
+# It is possible to set only one or two of these variables,

 # there is no need to copy the whole block.
 
 BINM_APROPOS=mapropos          # default is "apropos"
 # there is no need to copy the whole block.
 
 BINM_APROPOS=mapropos          # default is "apropos"

-BINM_MAN=mman                  # default is "man"

 BINM_WHATIS=mwhatis            # default is "whatis"
 BINM_MAKEWHATIS=mandocdb       # default is "makewhatis"
 
 BINM_WHATIS=mwhatis            # default is "whatis"
 BINM_MAKEWHATIS=mandocdb       # default is "makewhatis"
 

+# When using the "homebrew" package manager on Mac OS X, the actual
+# manuals are located in a so-called "cellar" and only symlinked
+# into the manual trees.  To allow mandoc to follow such symlinks,
+# you have to specify the physical location of the cellar as returned
+# by realpath(3), for example:
+
+PREFIX="/usr/local"
+HOMEBREWDIR="${PREFIX}/Cellar"
+

 # --- user settings related man.cgi ------------------------------------
 
 # By default, building man.cgi(8) is disabled.  To enable it, copy
 # --- user settings related man.cgi ------------------------------------
 
 # By default, building man.cgi(8) is disabled.  To enable it, copy


@@ -211,6 +238,7 @@ HAVE_STRLCAT=0
 HAVE_STRLCPY=0
 HAVE_STRPTIME=0
 HAVE_STRSEP=0
 HAVE_STRLCPY=0
 HAVE_STRPTIME=0
 HAVE_STRSEP=0

+HAVE_STRTONUM=0

 
 HAVE_SQLITE3=0
 HAVE_SQLITE3_ERRSTR=0
 
 HAVE_SQLITE3=0
 HAVE_SQLITE3_ERRSTR=0