If man(7) next-line scope is open and the line ends with \c,

[mandoc.git] / TODO

diff --git a/TODO b/TODO
index 06f668e8d000c48ec368fc24c7e0ed57fe4a4244..143e539496060cbb6d0da0de3b84591122041a7b 100644 (file)
--- a/TODO
+++ b/TODO
@@ -1,15 +1,36 @@
 ************************************************************************
 * Official mandoc TODO.
 ************************************************************************
 * Official mandoc TODO.

-* $Id: TODO,v 1.173 2014/07/24 08:26:05 schwarze Exp $
+* $Id: TODO,v 1.269 2018/08/24 23:12:33 schwarze Exp $

 ************************************************************************
 
 ************************************************************************
 

-************************************************************************
-* crashes
-************************************************************************
-
-- The abort() in bufcat(), html.c, can be triggered via buffmt_includes()
-  by running -Thtml -Oincludes on a file containing a long .In argument.
-  Fixing this will probably require reworking the whole bufcat() concept.
+Many issues are annotated for difficulty as follows:
+
+ - loc = locality of the issue
+    *    single file issue, affects file only, or very few
+    **   single module issue, affects several files of one module
+    ***  cross-module issue, significantly impacts multiple modules
+         and may require substantial changes to internal interfaces
+ - exist = difficulty of the existing code in this area
+    *    affected code is straightforward and easy to read and change
+    **   affected code is somewhat complex, but once you understand
+         the design, not particularly difficult to understand
+    ***  affected code uses a special, exceptionally tricky design
+ - algo = difficulty of the new algorithm to be written
+    *    the required logic and code is straightforward
+    **   the required logic is somewhat complex and needs a careful design
+    ***  the required logic is exceptionally tricky,
+         maybe an approach to solve that is not even known yet
+ - size = the amount of code to be written or changed
+    *    a small number of lines (at most 100, usually much less)
+    **   a considerable amount of code (several dozen to a few hundred)
+    ***  a large amount of code (many hundreds, maybe thousands)
+ - imp = importance of the issue
+    *    mostly for completeness
+    **   would be nice to have
+    ***  issue causes considerable inconvenience
+
+Obviously, as the issues have not been solved yet, these annotations
+are mere guesses, and some may be wrong.

 
 ************************************************************************
 * missing features
 
 ************************************************************************
 * missing features


@@ -25,84 +46,77 @@
   .na   -- temporarily disable adjustment without changing the mode
   .ad   -- re-enable adjustment without changing the mode
   Adjustment mode is ignored while in no-fill mode (.nf).
   .na   -- temporarily disable adjustment without changing the mode
   .ad   -- re-enable adjustment without changing the mode
   Adjustment mode is ignored while in no-fill mode (.nf).

+  loc ***  exist ***  algo **  size **  imp **  (parser reorg would help)

 
 - .fc (field control)
   found by naddy@ in xloadimage(1)
 
 - .fc (field control)
   found by naddy@ in xloadimage(1)

-  
-- .nr third argument (auto-increment step size, requires \n+)
-  found by bentley@ in sbcl(1)  Mon, 9 Dec 2013 18:36:57 -0700
+  loc **  exist ***  algo *  size *  imp *

 
 - .ns (no-space mode) occurs in xine-config(1)
 
 - .ns (no-space mode) occurs in xine-config(1)

+  when implementing this, also let .TH set it

   reported by brad@  Sat, 15 Jan 2011 15:45:23 -0500
   reported by brad@  Sat, 15 Jan 2011 15:45:23 -0500

+  loc ***  exist ***  algo ***  size **  imp *

 
 

-- .ta (tab settings) occurs in ircbug(1) and probably gnats(1)
-  reported by brad@  Sat, 15 Jan 2011 15:50:51 -0500
-  also Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100
-
-- .ti (temporary indent)
-  found by naddy@ in xloadimage(1)
-  found by bentley@ in nmh(1)  Mon, 23 Apr 2012 13:38:28 -0600
-
-- .while and .shift 
-  found by jca@ in ratpoison(1)  Sun, 30 Jun 2013 12:01:09 +0200
-
-- \c (interrupted text) should prevent the line break
-  even inside .Bd literal; that occurs in chat(8)
-  also found in cclive(1) - DocBook output
-
-- \h horizontal move
-  found in cclive(1) DocBook output
-  Anthony J. Bentley on discuss@  Sat, 21 Sep 2013 22:29:34 -0600
-
-- \n+ and \n- numerical register increment and decrement
-  found by bentley@ in sbcl(1)  Mon, 9 Dec 2013 18:36:57 -0700
-
-- \w'' width measurements
+- \w'' improve width measurements

   would not be very useful without an expression parser, see below
   needed for Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100
   would not be very useful without an expression parser, see below
   needed for Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100

-
-- using undefined strings or macros defines them to be empty
-  wl@  Mon, 14 Nov 2011 14:37:01 +0000
-
-- general expression parser, including arithmetics
-  to be used at least for .if/.ie and .nr and maybe at other places
-  could use J.T.Conklin's PD code in bin/expr/expr.c for inspiration
-  needed for Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100
+  loc **  exist ***  algo ***  size *  imp ***
+
+- \\ in high-level macro arguments
+  Currently, \\ is expanded in two situations:
+  1) macro and string definition (roff.c setstrn())
+  2) macro argument parsing (mandoc.c mandoc_getarg())
+  For user defined macros, the second happens in time because of ROFF_REPARSE.
+  But for standard high-level macros, it only happens after entering the
+  high level parsers, which is too late because the code doesn't get
+  back to roff.c roff_res() from that point.  Because this requires
+  distinguishing requests, user-defined macros and standard macros
+  on the roff_res() level, it is hard to solve without the parser reorg.
+  Found by naddy@ in devel/cutils cobfusc(1)  Mon, 16 Feb 2015 19:10:52 +0100
+  loc ***  exist ***  algo ***  size **  imp *
+
+- check for missing roff escape sequences, implement those that are
+  trivial even if not usually appearing in manual pages, gracefully
+  ignore the non-trivial ones, document what they are supposed to do
+  and what mandoc does instead
+  loc *  exist **  algo *  size *  imp *

 
 --- missing mdoc features ----------------------------------------------
 
 
 --- missing mdoc features ----------------------------------------------
 

-- fix bad block nesting involving multiple identical explicit blocks
-  see the OpenBSD mdoc_macro.c 1.47 commit message
-

 - .Bl -column .Xo support is missing
   ultimate goal:
   restore .Xr and .Dv to
   lib/libc/compat-43/sigvec.3
   lib/libc/gen/signal.3
   lib/libc/sys/sigaction.2
 - .Bl -column .Xo support is missing
   ultimate goal:
   restore .Xr and .Dv to
   lib/libc/compat-43/sigvec.3
   lib/libc/gen/signal.3
   lib/libc/sys/sigaction.2

+  loc *  exist ***  algo ***  size *  imp **

 
 - edge case: decide how to deal with blk_full bad nesting, e.g.
   .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1)
   from jmc@  Wed, 14 Jul 2010 18:10:32 +0100
 
 - edge case: decide how to deal with blk_full bad nesting, e.g.
   .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1)
   from jmc@  Wed, 14 Jul 2010 18:10:32 +0100

+  loc *  exist ***  algo ***  size **  imp **

 
 

-- \\ is now implemented correctly
-  * when defining strings and macros using .ds and .de
-  * when parsing roff(7) and man(7) macro arguments
-  It does not yet work in mdoc(7) macro arguments
-  because libmdoc does not yet use mandoc_getarg().
-  Also check what happens in plain text, it must be identical to \e.
+- .Bd -centered implies -filled, not -unfilled, which is not
+  easy to implement; it requires code similar to .ce, which
+  we don't have either.
+  Besides, groff has bug causing text right *before* .Bd -centered
+  to be centered as well.
+  loc ***  exist ***  algo **  size **  imp **  (parser reorg would help)

 
 - .Bd -filled should not be the same as .Bd -ragged, but align both
   the left and right margin.  In groff, it is implemented in terms
   of .ad b, which we don't have either.  Found in cksum(1).
 
 - .Bd -filled should not be the same as .Bd -ragged, but align both
   the left and right margin.  In groff, it is implemented in terms
   of .ad b, which we don't have either.  Found in cksum(1).

+  loc ***  exist ***  algo **  size **  imp **  (parser reorg would help)

 
 - implement blank `Bl -column', such as
   .Bl -column
   .It foo Ta bar
   .El
 
 - implement blank `Bl -column', such as
   .Bl -column
   .It foo Ta bar
   .El

+  loc *  exist ***  algo ***  size *  imp *

 
 - explicitly disallow nested `Bl -column', which would clobber internal
   flags defined for struct mdoc_macro
 
 - explicitly disallow nested `Bl -column', which would clobber internal
   flags defined for struct mdoc_macro

+  loc *  exist *  algo *  size *  imp **

 
 - In .Bl -column .It, the end of the line probably has to be regarded
   as an implicit .Ta, if there could be one, see the following mildly
 
 - In .Bl -column .It, the end of the line probably has to be regarded
   as an implicit .Ta, if there could be one, see the following mildly


@@ -113,6 +127,7 @@
     Default search path.
   reported by Michal Mazurek <akfaew at jasminek dot net>
   via jmc@ Thu, 7 Apr 2011 16:00:53 +0059
     Default search path.
   reported by Michal Mazurek <akfaew at jasminek dot net>
   via jmc@ Thu, 7 Apr 2011 16:00:53 +0059

+  loc *  exist ***  algo **  size *  imp **

 
 - inside `.Bl -column' phrases, punctuation is handled like normal
   text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -."
 
 - inside `.Bl -column' phrases, punctuation is handled like normal
   text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -."


@@ -121,14 +136,17 @@
   is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab."
   but should give "ab ."
 
   is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab."
   but should give "ab ."
 

-- set a meaningful default if no `Bl' list type is assigned
-
-- have a blank `It' head for `Bl -tag' not puke
-

 - prohibit `Nm' from having non-text HEAD children
   (e.g., NetBSD mDNSShared/dns-sd.1)
   (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified)
 
 - prohibit `Nm' from having non-text HEAD children
   (e.g., NetBSD mDNSShared/dns-sd.1)
   (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified)
 

+- support translated section names
+  e.g. x11/scrotwm scrotwm_es.1:21:2: error: NAME section must be first
+  that one uses NOMBRE because it is spanish...
+  deraadt tends to think that section-dependent macro behaviour
+  is a bad idea in the first place, so this may be irrelevant
+  loc **  exist **  algo **  size *  imp **
+

 - When there is free text in the SYNOPSIS and that free text contains
   the .Nm macro, groff somehow understands to treat the .Nm as an in-line
   macro, while mandoc treats it as a block macro and breaks the line.
 - When there is free text in the SYNOPSIS and that free text contains
   the .Nm macro, groff somehow understands to treat the .Nm as an in-line
   macro, while mandoc treats it as a block macro and breaks the line.


@@ -136,51 +154,99 @@
   should be, needs investigation.
   uqs@  Thu, 2 Jun 2011 11:03:51 +0200
   uqs@  Thu, 2 Jun 2011 11:33:35 +0200
   should be, needs investigation.
   uqs@  Thu, 2 Jun 2011 11:03:51 +0200
   uqs@  Thu, 2 Jun 2011 11:33:35 +0200

+  loc *  exist **  algo ***  size *  imp **

 
 --- missing man features -----------------------------------------------
 
 
 --- missing man features -----------------------------------------------
 

-- -T[x]html doesn't stipulate non-collapsing spaces in literal mode
+- groff_www(7) .MTO and .URL
+  These macros were used by the GNU grep(1) man page.
+  The groff_www(7) manual page itself uses them, too.
+  We should probably *not* add them to mandoc.
+  Just mentioning this here to keep track of the abuse.
+  Laura Morales <lauretas at mail dot com> 20 Apr 2018 07:33:02 +0200
+  loc **  exist *  algo *  size **  imp *

 
 --- missing tbl features -----------------------------------------------
 
 
 --- missing tbl features -----------------------------------------------
 

+- the "s" layout column specifier is used for placement of data
+  into columns, but ignored during column width calculations
+  synaptics(4) found by tedu@  Mon, 17 Aug 2015 21:17:42 -0400
+  loc *  exist **  algo ***  size *  imp **
+
+- vertical centering in cells vertically spanned with ^
+  pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
+  loc *  exist ***  algo ***  size **  imp *
+
+- support mdoc(7) and man(7) macros inside tbl(7) code;
+  probably requires the parser reorg and letting tbl(7)
+  use roff_node such that macro sets can mix;
+  informed by bapt@ that FreeBSD needs this: 3 Jan 2015 23:32:23 +0100
+  loc ***  exist **  algo ***  size **  imp ***
+

 - look at the POSIX manuals in the books/man-pages-posix port,
   they use some unsupported tbl(7) features.
 - look at the POSIX manuals in the books/man-pages-posix port,
   they use some unsupported tbl(7) features.

+  loc *  exist **  algo **  size **  imp ***

 
 

-- implement basic non-parametric .de to support e.g. sox(1)
-  reported by naddy@ Sat, 16 Oct 2010 23:51:57 +0200
-  *** sox(1) still doesn't work, tbl(1) errors need investigation
+- look what Joerg Schilling manual pages use
+  Thu, 19 Mar 2015 18:31:48 +0100

 
 

-- allow standalone `.' to be interpreted as an end-of-layout
-  delimiter instead of being thrown away as a no-op roff line
-  reported by Yuri Pankov, Wed 18 May 2011 11:34:59 CEST
+- use Unicode U+2500 to U+256C for table borders
+  in tbl(7) -Tutf-8 output
+  suggested by bentley@  Tue, 14 Oct 2014 04:10:55 -0600
+  loc *  exist **  algo *  size *  imp **
+
+- implement horizontal and vertical alignment in HTML output
+  pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
+  loc *  exist *  algo *  size *  imp ***
+
+- implement cell spanning in HTML output
+  pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
+  loc *  exist *  algo **  size **  imp **
+
+- implement table borders in HTML output
+  pali dot rohar at gmail dot com 16 Jul 2018 13:03:35 +0200
+  loc *  exist *  algo **  size **  imp **
+
+--- missing eqn features -----------------------------------------------
+
+- In a matrix, break the output line after each matrix line.
+  Found in the discussion at CDBUG 2015.
+  Suggested by Avi Weinstock.
+  loc *  exist *  algo *  size *  imp **
+
+- The "size" keyword is parsed, but ignored by the formatter.
+  loc *  exist *  algo *  size *  imp *
+
+- The spacing characters `~', `^', and tab are currently ignored,
+  see User's Guide (Second Edition) page 2 section 4.
+  loc *  exist *  algo **  size *  imp **
+
+- Mark and lineup are parsed and ignored,
+  see User's Guide (Second Edition) page 5 section 15.
+  loc **  exist **  algo **  size **  imp **
+
+- GNU eqn converts some operators to special characters, for example,
+  input HYPHEN-MINUS becomes output \(mi, unless it is part of a
+  quoted word.  mandoc(1) only does this when the operator is
+  surrounded by blanks, not when it is part of an unquoted word.
+  Also, check whether there are more such cases (e.g., +?).
+  reported by bentley@  20 Jun 2017 02:04:29 -0600
+  loc *  exist **  algo **  size *  imp *
+
+- Primes, opprime, and '
+  bentley@  Thu, 13 Jul 2017 23:14:20 -0600

 
 --- missing misc features ----------------------------------------------
 
 
 --- missing misc features ----------------------------------------------
 

+- man -ks 1,8 route; kn@ Jul 13, 2018 orally
+

 - italic correction (\/) in PostScript mode
   Werner LEMBERG on groff at gnu dot org  Sun, 10 Nov 2013 12:47:46
 - italic correction (\/) in PostScript mode
   Werner LEMBERG on groff at gnu dot org  Sun, 10 Nov 2013 12:47:46

+  loc **  exist **  algo *  size *  imp *

 
 

-- The whatis(1) utility looks for whole words in Nm.
-  If the file name of a page does not agree with the contents of any
-  of its Nm macros (e.g. pool(9)), add the file name as an Nm entry
-  to the mandoc.db as well, such that whatis(1) finds it.
-  If there is a page with a file name that does not appear as a substring
-  neither in Nm nor in Nd, the same fix would allow finding that page
-  with apropos(1) using the file name as a key, as well.
-  Issue reported by tedu@  Fri, 05 Jul 2013 21:15:23 -0400
-
-- When makewhatis(8) encounters a FATAL parse error,
-  it silently treats the file as formatted, which makes no sense
-  at all for paths like man1/foo.1 - and which also contradicts
-  what the manual says at the end of the description.
-  The end result will be ENOENT for file names returned
-  by mansearch() in manpage.file.
-
-- makewhatis(8) for preformatted pages:
-  parse the section number from the header line
-  and compare to the section number from the directory name
-
-- Does makewhatis(8) detect missing NAME sections, missing names,
-  and missing descriptions in all the file formats?
+- change the default PAGER to more -Es and use the pager
+  even for apropos title line output; req by bapt@
+  loc *  exist *  algo *  size *  imp ***

 
 - clean up escape sequence handling, creating three classes:
   (1) fully implemented, or parsed and ignored without loss of content
 
 - clean up escape sequence handling, creating three classes:
   (1) fully implemented, or parsed and ignored without loss of content


@@ -188,6 +254,24 @@
       or serious mangling of formatting (e.g. \n) -> ERROR
       see textproc/mgdiff(1) for nice examples
   (3) undefined, just output the character -> perhaps WARNING
       or serious mangling of formatting (e.g. \n) -> ERROR
       see textproc/mgdiff(1) for nice examples
   (3) undefined, just output the character -> perhaps WARNING

+  loc ***  exist **  algo **  size **  imp *** (parser reorg helps)
+
+- kettenis wants base roff, ms, and me  Fri, 1 Jan 2010 22:13:15 +0100 (CET)
+  loc **  exist **  algo **  size ***  imp *
+
+--- compatibility checks -----------------------------------------------
+
+- is .Bk implemented correctly in modern groff?
+  sobrado@  Tue, 19 Apr 2011 22:12:55 +0200
+
+- compare output to Heirloom roff, Solaris roff, and
+  http://repo.or.cz/w/neatroff.git  http://litcave.rudi.ir/
+
+- look at AT&T DWB http://www2.research.att.com/sw/download
+  Carsten Kunze <carsten dot kunze at arcor dot de> has patches
+  Mon, 4 Aug 2014 17:01:28 +0200
+  ported version: https://github.com/n-t-roff/DWB3.3
+  Carsten Kunze  Wed, 22 Apr 2015 11:21:43 +0200

 
 - look at pages generated from reStructeredText, e.g. devel/mercurial hg(1)
   These are a weird mixture of man(7) and custom autogenerated low-level
 
 - look at pages generated from reStructeredText, e.g. devel/mercurial hg(1)
   These are a weird mixture of man(7) and custom autogenerated low-level


@@ -196,6 +280,9 @@
   noted by stsp@  Sat, 24 Apr 2010 09:17:55 +0200
   reminded by nicm@  Mon, 3 May 2010 09:52:41 +0100
 
   noted by stsp@  Sat, 24 Apr 2010 09:17:55 +0200
   reminded by nicm@  Mon, 3 May 2010 09:52:41 +0100
 

+- look at pages generated from ronn(1) github.com/rtomayko/ronn
+  (based on markdown)
+

 - look at pages generated from Texinfo source by yat2m, e.g. security/gnupg
   First impression is not that bad.
 
 - look at pages generated from Texinfo source by yat2m, e.g. security/gnupg
   First impression is not that bad.
 


@@ -208,22 +295,47 @@
   http://swtch.com/plan9port/man/man7/man.html
   "Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700
 
   http://swtch.com/plan9port/man/man7/man.html
   "Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700
 

+- check compatibility with COHERENT troff:
+  http://www.nesssoftware.com/home/mwc/source.php
+
+- check compatibility with the man(7) formatter
+  https://raw.githubusercontent.com/rofl0r/hardcore-utils/master/man.c
+
+- check compatibility with
+  http://ikiwiki.info/plugins/contrib/mandoc/
+  https://github.com/schmonz/ikiwiki/compare/mandoc
+  Amitai Schlair  Mon, 19 May 2014 14:05:53 -0400
+
+- check features of the Slackware man.conf(5) format
+  Carsten Kunze  Wed, 11 Mar 2015 17:57:24 +0100
+

 ************************************************************************
 * formatting issues: ugly output
 ************************************************************************
 
 ************************************************************************
 * formatting issues: ugly output
 ************************************************************************
 

-- a column list with blank `Ta' cells triggers a spurrious
+- revisit empty in-line macros
+  look at the difference between "Em x Em ." and "Sq x Em ."
+  Carsten Kunze  Fri, 12 Dec 2014 00:15:41 +0100
+  loc *** exist *** algo *** size * imp **
+
+- a column list with blank `Ta' cells triggers a spurious

   start-with-whitespace printing of a newline
 
   start-with-whitespace printing of a newline
 

+- In .Bl -column, .It a<tab>"b<tab>c"
+  shows the quotes in groff, but not in mandoc
+  loc * exist *** algo ** size * imp **
+

 - In .Bl -column,
   .It Em Authentication<tab>Key Length
   ought to render "Key Length" with emphasis, too,
   see OpenBSD iked.conf(5).
   reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200
 - In .Bl -column,
   .It Em Authentication<tab>Key Length
   ought to render "Key Length" with emphasis, too,
   see OpenBSD iked.conf(5).
   reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200

+  loc *  exist ***  algo ***  size **  imp ***

 
 - empty phrases in .Bl column produce too few blanks
   try e.g. .Bl -column It Ta Ta
   reported by millert Fri, 02 Apr 2010 16:13:46 -0400
 
 - empty phrases in .Bl column produce too few blanks
   try e.g. .Bl -column It Ta Ta
   reported by millert Fri, 02 Apr 2010 16:13:46 -0400

+  loc *  exist ***  algo ***  size *  imp **

 
 - .%T can have trailing punctuation.  Currently, it puts the trailing
   punctuation into a trailing MDOC_TEXT element inside its own scope.
 
 - .%T can have trailing punctuation.  Currently, it puts the trailing
   punctuation into a trailing MDOC_TEXT element inside its own scope.


@@ -233,67 +345,122 @@
   slurp all arguments into one single text element - and one feature
   of in_line() - put trailing punctuation out of scope.
   Found in mount_nfs(8) and exports(5), search for "Appendix".
   slurp all arguments into one single text element - and one feature
   of in_line() - put trailing punctuation out of scope.
   Found in mount_nfs(8) and exports(5), search for "Appendix".

+  loc **  exist **  algo ***  size *  imp **

 
 - Trailing punctuation after .%T triggers EOS spacing, at least
   outside .Rs (eek!).  Simply setting ARGSFL_DELIM for .%T is not
   the right solution, it sends mandoc into an endless loop.
   reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
 
 - Trailing punctuation after .%T triggers EOS spacing, at least
   outside .Rs (eek!).  Simply setting ARGSFL_DELIM for .%T is not
   the right solution, it sends mandoc into an endless loop.
   reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100

+  loc *  exist **  algo **  size *  imp **
+
+- global variables in the SYNOPSIS of section 3 pages
+  .Vt vs .Vt/.Va vs .Ft/.Va vs .Ft/.Fa ...
+  from kristaps@  Tue, 08 Jun 2010 11:13:32 +0200
+
+- implicit whitespace around inline equations
+  example code:  where '$times$' denotes matrix multiplication
+  must not have an HTML line break, nor a blank, before <math>
+  partial solution: html.c {"math", HTML_NLINSIDE | HTML_INDENT},
+  bentley@  Thu, 13 Jul 2017 19:00:59 -0600

 
 - in enclosures, mandoc sometimes fancies a bogus end of sentence
   reminded by jmc@  Thu, 23 Sep 2010 18:13:39 +0059
 
 - in enclosures, mandoc sometimes fancies a bogus end of sentence
   reminded by jmc@  Thu, 23 Sep 2010 18:13:39 +0059

+  loc *  exist **  algo ***  size *  imp ***
+
+- a line starting with "\fB something" counts as starting with whitespace
+  and triggers a line break; found in audio/normalize-mp3(1)
+  loc **  exist *  algo **  size *  imp **

 
 - formatting /usr/local/man/man1/latex2man.1 with groff and mandoc
   reveals lots of bugs both in groff and mandoc...
   reported by bentley@  Wed, 22 May 2013 23:49:30 -0600
 
 
 - formatting /usr/local/man/man1/latex2man.1 with groff and mandoc
   reveals lots of bugs both in groff and mandoc...
   reported by bentley@  Wed, 22 May 2013 23:49:30 -0600
 

---- PDF issues ---------------------------------------------------------
+--- PostScript and PDF issues ------------------------------------------

 
 - PDF output doesn't use a monospaced font for .Bd -literal
   Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf".
   Search the text "Routing tables".
   Also check what PostScript mode does when fixing this.
   reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200
 
 - PDF output doesn't use a monospaced font for .Bd -literal
   Example: "mandoc -Tpdf afterboot.8 > output.pdf && pdfviewer output.pdf".
   Search the text "Routing tables".
   Also check what PostScript mode does when fixing this.
   reported by juanfra@ Wed, 04 Jun 2014 21:44:58 +0200

+  instructions from juanfra@  Wed, 11 Jun 2014 02:21:01 +0200
+    add a new <</Type /Font>> block to the PDF files with /BaseFont /Courier
+    and change the /Name from /F0 to the new font (/F5 (?)).
+  re-reported by tb@ Mon, 16 Mar 2015 16:47:21 +0100
+  loc *  exist **  algo **  size *  imp **

 
 --- HTML issues --------------------------------------------------------
 
 
 --- HTML issues --------------------------------------------------------
 

+- wrap Sh and Ss content into <div>
+  Laura Morales <lauretas at mail dot com> 21 Apr 2018 18:10:48 +0200
+  (Evaluate whether this is really useful and has no adverse
+   side effects before implementing; if it is possible,
+   it does seem cleaner.)
+  loc **  exist **  algo *  size *  imp ***
+
+- format ".IP *" etc. as <ul> rather than <dl>
+  https://github.com/Debian/debiman/issues/67
+  loc ** exist ** algo ** size * imp ***
+
+- .Bf at the beginning of a paragraph inserts a bogus 1ex horizontal
+  space, see for example random(3).  Introduced in
+  http://mdocml.bsd.lv/cgi-bin/cvsweb/mdoc_html.c.diff?r1=1.91&r2=1.92
+  reported by deraadt@ Mon, 28 Sep 2015 20:14:13 -0600 (MDT)
+  loc **  exist **  algo **  size *  imp *
+
+- jsg on icb, Nov 3, 2014:
+  try to guess Xr in man(7) for hyperlinking
+  and render them with <a class="Xr" href=...>
+  https://github.com/Debian/debiman/issues/15
+  loc *  exist *  algo **  size **  imp **
+
+- The tables used to render the three-part page headers actually force
+  the width of the <body> to the max-width given for <html>.
+  Not yet sure how to fix that...
+  Observed by an Anonymous Coward on undeadly.org:
+  http://undeadly.org/cgi?action=article&sid=20140925064244&pid=1
+  loc *  exist *  algo **  size *  imp ***
+
+- generate <img> tags in HTML
+  idea from florian@  Tue, 7 Apr 2015 00:26:28 +0000
+  may be possible to implement with .Lk img://something.png alt_text
+

 - check https://github.com/trentm/mdocml
 
 ************************************************************************
 * formatting issues: gratuitous differences
 ************************************************************************
 
 - check https://github.com/trentm/mdocml
 
 ************************************************************************
 * formatting issues: gratuitous differences
 ************************************************************************
 

-- .Rv (and probably .Ex) print different text if an `Nm' has been named
-  or not (run a manual without `Nm blah' to see this).  I'm not sure
-  that this exists in the wild, but it's still an error.
+- .Fn reopens a new scope after punctuation in mandoc,
+  but closes its scope for good in groff.
+  Do we want to change mandoc or groff?
+  Steffen Nurpmeso  Sat, 08 Nov 2014 13:34:59 +0100
+  loc *  exist **  algo **  size *  imp **

 
 

-- In .Bl -bullet, the groff bullet is "+\b+\bo\bo", the mandoc bullet
-  is just "o\bo".
-  see for example OpenBSD ksh(1)
+- In .Bl -enum -width 0n, groff continues one the same line after
+  the number, mandoc breaks the line.
+  mail to kristaps@  Mon, 20 Jul 2009 02:21:39 +0200
+  loc *  exist **  algo **  size *  imp **

 
 - .Pp between two .It in .Bl -column should produce one,
   not two blank lines, see e.g. login.conf(5).
   reported by jmc@  Sun, 17 Apr 2011 14:04:58 +0059
   reported again by sthen@  Wed, 18 Jan 2012 02:09:39 +0000 (UTC)
 
 - .Pp between two .It in .Bl -column should produce one,
   not two blank lines, see e.g. login.conf(5).
   reported by jmc@  Sun, 17 Apr 2011 14:04:58 +0059
   reported again by sthen@  Wed, 18 Jan 2012 02:09:39 +0000 (UTC)

+  loc *  exist ***  algo **  size *  imp **

 
 - If the *first* line after .It is .Pp, break the line right after
   the tag, do not pad with space characters before breaking.
   See the description of the a, c, and i commands in sed(1).
 
 - If the *first* line after .It is .Pp, break the line right after
   the tag, do not pad with space characters before breaking.
   See the description of the a, c, and i commands in sed(1).

+  loc *  exist **  algo **  size *  imp **

 
 - If the first line after .It is .D1, do not assert a blank line
   in between, see for example tmux(1).
   reported by nicm@  13 Jan 2011 00:18:57 +0000
 
 - If the first line after .It is .D1, do not assert a blank line
   in between, see for example tmux(1).
   reported by nicm@  13 Jan 2011 00:18:57 +0000

+  loc *  exist **  algo **  size *  imp **

 
 - Trailing punctuation after .It should trigger EOS spacing.
   reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
   Probably, this should be fixed somewhere in termp_it_pre(), not sure.
 
 - Trailing punctuation after .It should trigger EOS spacing.
   reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
   Probably, this should be fixed somewhere in termp_it_pre(), not sure.

-
-- .Nx 1.0a
-  should be "NetBSD 1.0A", not "NetBSD 1.0a",
-  see OpenBSD ccdconfig(8).
-
-- In .Bl -tag, if a tag exceeds the right margin and must be continued
-  on the next line, it must be indented by -width, not width+1;
-  see "rule block|pass" in OpenBSD ifconfig(8).
+  loc *  exist **  algo **  size *  imp **

 
 - When the -width string contains macros, the macros must be rendered
   before measuring the width, for example
 
 - When the -width string contains macros, the macros must be rendered
   before measuring the width, for example


@@ -303,69 +470,166 @@
   The same applies to .Bl -column column widths;
   reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar
   reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200
   The same applies to .Bl -column column widths;
   reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar
   reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200

+  reported again by Bruce Evans Fri, 17 Feb 2017 21:22:44 +0100 via bapt@
+  loc ***  exist ***  algo ***  size **  imp ***

   An easy partial fix would be to just skip the first word if it starts
   with a dot, including any following white space, when measuring.
   An easy partial fix would be to just skip the first word if it starts
   with a dot, including any following white space, when measuring.

+  loc *  exist *  algo *  size *  imp ***

 
 - The \& zero-width character counts as output.
   That is, when it is alone on a line between two .Pp,
   we want three blank lines, not two as in mandoc.
 
 - The \& zero-width character counts as output.
   That is, when it is alone on a line between two .Pp,
   we want three blank lines, not two as in mandoc.

+  loc **  exist **  algo **  size *  imp **

 
 

-- Header lines of excessive length:
-  Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c
-  and document it in mdoc(7) and man(7) COMPATIBILITY
-  found while talking to Chris Bennett
+- Sequences of multiple man(7) paragraphs (.PP, .IP) interspersed
+  with .ps and .nf/.fi produce execessive blank lines, see libJudy
+  and graphics/dcmtk.  The parser reorg may help with this.

 
 - trailing whitespace must be ignored even when followed by a font escape,
 
 - trailing whitespace must be ignored even when followed by a font escape,

-  see for example 
+  see for example

     makes
     \fBdig \fR
     operate in batch mode
   in dig(1).
     makes
     \fBdig \fR
     operate in batch mode
   in dig(1).

+  loc **  exist **  algo **  size *  imp **

 
 ************************************************************************
 * warning issues
 ************************************************************************
 
 
 ************************************************************************
 * warning issues
 ************************************************************************
 

-- check that MANDOCERR_BADTAB is thrown in the right cases,
-  i.e. when finding a literal tab character in fill mode,
-  and possibly change the wording of the warning message
-  to refer to fill mode, not literal mode
-  See the mail from Werner LEMBERG on the groff list,
-  Fri, 14 Feb 2014 18:54:42 +0100 (CET)
+- When a man(1) command returns no result and there was an -S
+  argument, check the -S argument against the list of valid
+  architectures and say "Unknown architecture AAA" rather than
+  "No entry for NNN in the manual" if there is no match.
+  Requires moving the lists of valid architectures out of
+  mdoc_validate.c such that they can be used by main.c.
+  Discussed with jmc@ 10 Aug 2018 19:20:12 +0100.
+  loc **  exist *  algo *  size *  imp **
+
+- warn about duplicate .Sh/.Ss heads
+  gre(4): Rename duplicate sections 20 Apr 2018 15:27:33 +0200
+  loc *  exist *  algo *  size *  imp **
+
+- style message about macros inside .Bd -literal and .Dl, in particular
+  font changing macros like .Cm, .Ar, .Fa (from the mdoclint TODO)
+
+- style message about mismatches between the section number in the
+  file name (if it is known) and the section number in .Dt
+  (from the mdoclint TODO)
+
+- style message about NULL without .Dv (from the mdoclint TODO)
+
+- style message about error constants without .Er (from the mdoclint TODO)
+
+- warn when .Sh or .Ss contain other macros
+  Steffen Nurpmeso, savannah.gnu.org/bugs/index.php?45034
+  loc *  exist *  algo *  size *  imp **
+
+- style message about violations of the convention
+  .An name Aq Mt localpart@domain in AUTHORS (from the mdoclint TODO)
+
+- warn about attempts to call non-callable macros
+  Steffen Nurpmeso  Tue, 11 Nov 2014 22:55:16 +0100
+  Note that formatting is inconsistent in groff.
+  .Fn Po prints "Po()", .Ar Sh prints "file ..." and no "Sh".
+  Relatively hard because the relevant code is scattered
+  all over mdoc_macro.c and all subtly different.
+  loc **  exist **  algo **  size **  imp **
+
+- style message about suspicious uses of - vs. \- vs. \(mi
+  e.g. -1 is likely wrong (from the mdoclint TODO)
+
+- warn about punctuation - e.g. ',' and ';' - at the beginning
+  of a text line, if it is likely intended to follow the preceding
+  output without intervening whitespace, in particular after a
+  macro line (from the mdoclint TODO)
+
+- mandoc_special does not really check the escape sequence,
+  but just the overall format
+  loc **  exist **  algo ***  size **  imp **
+
+- makewhatis -p complains about language subdirectories:
+  /usr/local/man//ru: Unknown directory part
+

 
 ************************************************************************
 
 ************************************************************************

-* performance issues
+* documentation issues

 ************************************************************************
 
 ************************************************************************
 

-Several areas can be cleaned up to make mandoc even faster.  These are 
+- dashes, hyphens, and minus signs in manual pages
+  jmc@ Fri, 28 Mar 2014 07:19:27 +0000

 
 

-- improve hashing mechanism for macros (quite important: performance)
+- mark macros as: page structure domain, manual domain, general text domain
+  is this useful?

 
 

-- improve hashing mechanism for characters (not as important)
+- mention /usr/share/misc/mdoc.template in mdoc(7)?

 
 

-- the PDF file is HUGE: this can be reduced by using relative offsets
+- Is all the content from http://www.std.com/obi/BSD/doc/usd/28.tbl/tbl
+  covered in tbl(7)?
+
+************************************************************************
+* performance issues
+************************************************************************

 
 

-- instead of re-initialising the roff predefined-strings set before each
-  parse, create a read-only version the first time and copy it 
+- the PDF file is HUGE: this can be reduced by using relative offsets

 
 ************************************************************************
 * structural issues
 ************************************************************************
 
 
 ************************************************************************
 * structural issues
 ************************************************************************
 

+- POSIX says in the documentation of sysconf(3) that PATH_MAX
+  is allowed to be so large that it is a bad idea to use it
+  for sizing static buffers.  So use dynamic buffers throughout.
+  See the file test-PATH_MAX.c for details.
+  Found by Aaron M. Ucko in the GNU Hurd via Bdale Garbee,
+  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=829624
+

 - We use the input line number at several places to distinguish
   same-line from different-line input.  That plainly doesn't work
   with user-defined macros, leading to random breakage.
 
 - We use the input line number at several places to distinguish
   same-line from different-line input.  That plainly doesn't work
   with user-defined macros, leading to random breakage.
 

+- Is it possible to further simplify ENDBODY_SPACE?
+

 - Find better ways to prevent endless loops
   in roff(7) macro and string expansion.
 - Find better ways to prevent endless loops
   in roff(7) macro and string expansion.

- 
-- Finish cleanup of date handling.
-  Decide which formats should be recognized where.
-  Update both mdoc(7) and man(7) documentation.
-  Triggered by  Tim van der Molen  Tue, 22 Feb 2011 20:30:45 +0100

 
 

-- Consider creating some views that will make the database more
-  readable from the sqlite3 shell.  Consider using them to
-  abstract from the database structure, too.
-  suggested by espie@  Sat, 19 Apr 2014 14:52:57 +0200
+- make buffers for parsing functions const
+  christos@ via wiz@  Fri, 18 Dec 2015 17:10:01 +0100
+
+- struct mparse refactoring
+  Steffen Nurpmeso  Thu, 04 Sep 2014 12:50:00 +0200
+
+************************************************************************
+* CGI issues
+************************************************************************
+
+ - Enable HTTP compression by detecting gzip encoding and filtering
+   output through libz.
+ - Privilege separation (see OpenSSH).
+ - Enable caching support via HTTP 304 and If-Modified-Since.
+ - Have Mac OSX systems automatically disable -static compilation of the
+   CGI: -static isn't supported.
+
+************************************************************************
+* to improve in the groff_mdoc(7) macros
+************************************************************************

 
 

+- .Cd # arch1, arch2 in section 4 pages:
+  find better way to indicate multiple architectures, maybe:
+  allow .Dt vgafb 4 "macppc sparc64"
+  already shown as "Device Drivers Manual (macppc sparc64)"
+  for apropos, make that "vgafb(4) - macppc # sparc64" instead of "- all"
+  groff can be made to show multiple arches, too, but it is
+  tedious to do the string parsing in roff code...
+  jmc@ 23 Apr 2018 07:24:52 +0100 [man for vgafb(4)...]
+  loc **  exist **  algo *  size *  imp ***
+
+- use uname(1) to set doc-default-operating-system at install time
+  tobimensch  Mon, 1 Dec 2014 00:25:07 +0100
+
+- apostrophe (39), circumflex (94), grave (96), tilde (126)
+  in manuals: \(aq, \(ha, \`, \(ti
+  Re: [Groff] ASCII Minus Sign in man Pages.
+  bentley@ 26 Apr 2017 10:02:06 -0600
+  Do we need to fix existing manuals?
+  Do we need to fix the definition of the mdoc(7) language?