Introduce ARGS_PEND for `It -column' end-of-line special casing.

[mandoc.git] / man.7

diff --git a/man.7 b/man.7
index 91f469c76983c499b289d62fd0a2f25b1997ed7f..f410ced31a140e2660ce9a799c449667d792799c 100644 (file)
--- a/man.7
+++ b/man.7
@@ -1,6 +1,6 @@
-.\"    $Id: man.7,v 1.20 2009/07/20 13:45:11 kristaps Exp $
+.\"    $Id: man.7,v 1.66 2010/05/08 22:26:39 kristaps Exp $

 .\"
 .\"

-.\" Copyright (c) 2009 Kristaps Dzonsons <kristaps@kth.se>
+.\" Copyright (c) 2009 Kristaps Dzonsons <kristaps@bsd.lv>

 .\"
 .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
 .\"
 .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above


@@ -14,14 +14,12 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"

-.Dd $Mdocdate: July 20 2009 $
+.Dd $Mdocdate: May 8 2010 $

 .Dt MAN 7
 .Os
 .Dt MAN 7
 .Os

-.\" SECTION

 .Sh NAME
 .Nm man
 .Nd man language reference
 .Sh NAME
 .Nm man
 .Nd man language reference

-.\" SECTION

 .Sh DESCRIPTION
 The
 .Nm man
 .Sh DESCRIPTION
 The
 .Nm man


@@ -38,7 +36,6 @@ to write your manuals.
 Use the
 .Xr mdoc 7
 language, instead.
 Use the
 .Xr mdoc 7
 language, instead.

-.\" PARAGRAPH

 .Pp
 An
 .Nm
 .Pp
 An
 .Nm


@@ -51,7 +48,6 @@ prior macros:
 \&.SH Macro lines change control state.
 Other lines are interpreted within the current state.
 .Ed
 \&.SH Macro lines change control state.
 Other lines are interpreted within the current state.
 .Ed

-.\" SECTION

 .Sh INPUT ENCODING
 .Nm
 documents may contain only graphable 7-bit ASCII characters, the
 .Sh INPUT ENCODING
 .Nm
 documents may contain only graphable 7-bit ASCII characters, the


@@ -61,26 +57,17 @@ line termination.
 .Pp
 Blank lines are acceptable; where found, the output will assert a
 vertical space.
 .Pp
 Blank lines are acceptable; where found, the output will assert a
 vertical space.

-.Pp
-The
-.Sq \ec
-escape is common in historical
-.Nm
-documents; if encountered at the end of a word, it ensures that the
-subsequent word isn't off-set by whitespace.
-.\" SUB-SECTION

 .Ss Comments
 .Ss Comments

-Anything following a
-.Sq \e"
-delimiter is considered a comment (unless the
-.Sq \e
-itself has been escaped) and is ignored to the end of line.
-Furthermore, a macro line with only a control character
-.Sq \. ,
-optionally followed by whitespace, is ignored.
-.\" SUB-SECTION
+Text following a
+.Sq \e\*" ,
+whether in a macro or free-form text line, is ignored to the end of
+line.  A macro line with only a control character and comment escape,
+.Sq \&.\e" ,
+is also ignored.  Macro lines with only a control character and
+optionally whitespace are stripped from input.

 .Ss Special Characters
 .Ss Special Characters

-Special character sequences begin with the escape character
+Special characters may occur in both macro and free-form lines.
+Sequences begin with the escape character

 .Sq \e
 followed by either an open-parenthesis
 .Sq \&(
 .Sq \e
 followed by either an open-parenthesis
 .Sq \&(


@@ -88,153 +75,842 @@ for two-character sequences; an open-bracket
 .Sq \&[
 for n-character sequences (terminated at a close-bracket
 .Sq \&] ) ;
 .Sq \&[
 for n-character sequences (terminated at a close-bracket
 .Sq \&] ) ;

-or a single one-character sequence.
+or a single one-character sequence.  See
+.Xr mandoc_char 7
+for a complete list.  Examples include
+.Sq \e(em
+.Pq em-dash
+and
+.Sq \ee
+.Pq back-slash .
+.Ss Text Decoration
+Terms may be text-decorated using the
+.Sq \ef
+escape followed by an indicator: B (bold), I, (italic), R (Roman), or P
+(revert to previous mode):
+.Pp
+.D1 \efBbold\efR \efIitalic\efP
+.Pp
+A numerical representation 3, 2, or 1 (bold, italic, and Roman,
+respectively) may be used instead.  A text decoration is only valid, if
+specified in free-form text, until the next macro invocation; if
+specified within a macro, it's only valid until the macro closes scope.
+Note that macros like
+.Sx \&BR
+open and close a font scope with each argument.

 .Pp
 .Pp

-Characters may alternatively be escaped by a slash-asterisk,
-.Sq \e* ,
-with the same combinations as described above.
+Text may also be sized with the
+.Sq \es
+escape, whose syntax is one of
+.Sq \es+-n
+for one-digit numerals;
+.Sq \es(+-nn
+or
+.Sq \es+-(nn
+for two-digit numerals; and
+.Sq \es[+-N] ,
+.Sq \es+-[N] ,
+.Sq \es'+-N' ,
+or
+.Sq \es+-'N'
+for arbitrary-digit numerals:

 .Pp
 .Pp

-Terms may also be text-decorated using the
+.D1 \es+1bigger\es-1
+.D1 \es[+10]much bigger\es[-10]
+.D1 \es+(10much bigger\es-(10
+.D1 \es+'100'much much bigger\es-'100'
+.Pp
+Both
+.Sq \es
+and

 .Sq \ef
 .Sq \ef

-escape followed by a text-decoration letter: B (bold), I, (italic), or P
-and R (Roman, or reset).
-.\" SUB-SECTION
+attributes are forgotten when entering or exiting a macro block.

 .Ss Whitespace
 .Ss Whitespace

-Unless specifically escaped, consecutive blocks of whitespace are pruned
-from input.  These are later re-added, if applicable, by a front-end
-utility such as
-.Xr mandoc 1 .
-.\" SECTION
-.Sh STRUCTURE
+Whitespace consists of the space character.
+In free-form lines, whitespace is preserved within a line; un-escaped
+trailing spaces are stripped from input (unless in a literal context).
+Blank free-form lines, which may include spaces, are permitted and
+rendered as an empty line.
+.Pp
+In macro lines, whitespace delimits arguments and is discarded.  If
+arguments are quoted, whitespace within the quotes is retained.
+.Ss Dates
+The
+.Sx \&TH
+macro is the only
+.Nm
+macro that requires a date.  The form for this date is the ISO-8601
+standard
+.Cm YYYY-MM-DD .
+.Ss Scaling Widths
+Many macros support scaled widths for their arguments, such as
+stipulating a two-inch paragraph indentation with the following:
+.Bd -literal -offset indent
+\&.HP 2i
+.Ed
+.Pp
+The syntax for scaled widths is
+.Sq Li [+-]?[0-9]*.[0-9]*[:unit:]? ,
+where a decimal must be preceded or proceeded by at least one digit.
+Negative numbers, while accepted, are truncated to zero.  The following
+scaling units are accepted:
+.Pp
+.Bl -tag -width Ds -offset indent -compact
+.It c
+centimetre
+.It i
+inch
+.It P
+pica (~1/6 inch)
+.It p
+point (~1/72 inch)
+.It f
+synonym for
+.Sq u
+.It v
+default vertical span
+.It m
+width of rendered
+.Sq m
+.Pq em
+character
+.It n
+width of rendered
+.Sq n
+.Pq en
+character
+.It u
+default horizontal span
+.It M
+mini-em (~1/100 em)
+.El
+.Pp
+Using anything other than
+.Sq m ,
+.Sq n ,
+.Sq u ,
+or
+.Sq v
+is necessarily non-portable across output media.
+.Pp
+If a scaling unit is not provided, the numerical value is interpreted
+under the default rules of
+.Sq v
+for vertical spaces and
+.Sq u
+for horizontal ones.
+.Em Note :
+this differs from
+.Xr mdoc 7 ,
+which, if a unit is not provided, will instead interpret the string as
+literal text.
+.Sh MANUAL STRUCTURE

 Each
 .Nm
 document must contain contains at least the
 Each
 .Nm
 document must contain contains at least the

-.Sq \&.TH
+.Sx \&TH

 macro describing the document's section and title.  It may occur
 anywhere in the document, although conventionally, it appears as the
 first macro.
 .Pp
 macro describing the document's section and title.  It may occur
 anywhere in the document, although conventionally, it appears as the
 first macro.
 .Pp

-Beyond the
-.Sq \&.TH ,
-at least one macro or text node must appear in the document.
-.\" SECTION
-.Sh SYNTAX
+Beyond
+.Sx \&TH ,
+at least one macro or text node must appear in the document.  Documents
+are generally structured as follows:
+.Bd -literal -offset indent
+\&.TH FOO 1 2009-10-10
+\&.
+\&.SH NAME
+\efBfoo\efR \e(en a description goes here
+\&.\e\*q The next is for sections 2 & 3 only.
+\&.\e\*q .SH LIBRARY
+\&.
+\&.SH SYNOPSIS
+\efBfoo\efR [\efB\e-options\efR] arguments...
+\&.
+\&.SH DESCRIPTION
+The \efBfoo\efR utility processes files...
+\&.
+\&.\e\*q .SH IMPLEMENTATION NOTES
+\&.\e\*q The next is for sections 1 & 8 only.
+\&.\e\*q .SH EXIT STATUS
+\&.\e\*q The next is for sections 2, 3, & 9 only.
+\&.\e\*q .SH RETURN VALUES
+\&.\e\*q The next is for sections 1, 6, 7, & 8 only.
+\&.\e\*q .SH ENVIRONMENT
+\&.\e\*q .SH FILES
+\&.\e\*q .SH EXAMPLES
+\&.\e\*q The next is for sections 1, 4, 6, 7, & 8 only.
+\&.\e\*q .SH DIAGNOSTICS
+\&.\e\*q The next is for sections 2, 3, & 9 only.
+\&.\e\*q .SH ERRORS
+\&.\e\*q .SH SEE ALSO
+\&.\e\*q .BR foo ( 1 )
+\&.\e\*q .SH STANDARDS
+\&.\e\*q .SH HISTORY
+\&.\e\*q .SH AUTHORS
+\&.\e\*q .SH CAVEATS
+\&.\e\*q .SH BUGS
+\&.\e\*q .SH SECURITY CONSIDERATIONS
+.Ed
+.Pp
+The sections in a
+.Nm
+document are conventionally ordered as they appear above.  Sections
+should be composed as follows:
+.Bl -ohang -offset indent
+.It Em NAME
+The name(s) and a short description of the documented material.  The
+syntax for this is generally as follows:
+.Pp
+.D1 \efBname\efR \e(en description
+.It Em LIBRARY
+The name of the library containing the documented material, which is
+assumed to be a function in a section 2 or 3 manual.  For functions in
+the C library, this may be as follows:
+.Pp
+.D1 Standard C Library (libc, -lc)
+.It Em SYNOPSIS
+Documents the utility invocation syntax, function call syntax, or device
+configuration.
+.Pp
+For the first, utilities (sections 1, 6, and 8), this is
+generally structured as follows:
+.Pp
+.D1 \efBname\efR [-\efBab\efR] [-\efBc\efR\efIarg\efR] \efBpath\efR...
+.Pp
+For the second, function calls (sections 2, 3, 9):
+.Pp
+.D1 \&.B char *name(char *\efIarg\efR);
+.Pp
+And for the third, configurations (section 4):
+.Pp
+.D1 \&.B name* at cardbus ? function ?
+.Pp
+Manuals not in these sections generally don't need a
+.Em SYNOPSIS .
+.It Em DESCRIPTION
+This expands upon the brief, one-line description in
+.Em NAME .
+It usually contains a break-down of the options (if documenting a
+command).
+.It Em IMPLEMENTATION NOTES
+Implementation-specific notes should be kept here.  This is useful when
+implementing standard functions that may have side effects or notable
+algorithmic implications.
+.It Em EXIT STATUS
+Command exit status for section 1, 6, and 8 manuals.  This section is
+the dual of
+.Em RETURN VALUES ,
+which is used for functions.  Historically, this information was
+described in
+.Em DIAGNOSTICS ,
+a practise that is now discouraged.
+.It Em RETURN VALUES
+This section is the dual of
+.Em EXIT STATUS ,
+which is used for commands.  It documents the return values of functions
+in sections 2, 3, and 9.
+.It Em ENVIRONMENT
+Documents any usages of environment variables, e.g.,
+.Xr environ 7 .
+.It Em FILES
+Documents files used.  It's helpful to document both the file and a
+short description of how the file is used (created, modified, etc.).
+.It Em EXAMPLES
+Example usages.  This often contains snippets of well-formed,
+well-tested invocations.  Make doubly sure that your examples work
+properly!
+.It Em DIAGNOSTICS
+Documents error conditions.  This is most useful in section 4 manuals.
+Historically, this section was used in place of
+.Em EXIT STATUS
+for manuals in sections 1, 6, and 8; however, this practise is
+discouraged.
+.It Em ERRORS
+Documents error handling in sections 2, 3, and 9.
+.It Em SEE ALSO
+References other manuals with related topics.  This section should exist
+for most manuals.
+.Pp
+.D1 \&.BR bar \&( 1 \&),
+.Pp
+Cross-references should conventionally be ordered
+first by section, then alphabetically.
+.It Em STANDARDS
+References any standards implemented or used, such as
+.Pp
+.D1 IEEE Std 1003.2 (\e(lqPOSIX.2\e(rq)
+.Pp
+If not adhering to any standards, the
+.Em HISTORY
+section should be used.
+.It Em HISTORY
+The history of any manual without a
+.Em STANDARDS
+section should be described in this section.
+.It Em AUTHORS
+Credits to authors, if applicable, should appear in this section.
+Authors should generally be noted by both name and an e-mail address.
+.It Em CAVEATS
+Explanations of common misuses and misunderstandings should be explained
+in this section.
+.It Em BUGS
+Extant bugs should be described in this section.
+.It Em SECURITY CONSIDERATIONS
+Documents any security precautions that operators should consider.
+.El
+.Sh MACRO SYNTAX

 Macros are one to three three characters in length and begin with a
 control character ,
 .Sq \&. ,
 Macros are one to three three characters in length and begin with a
 control character ,
 .Sq \&. ,

-at the beginning of the line.  An arbitrary amount of whitespace may
-sit between the control character and the macro name.  Thus,
-.Sq \&.PP
-and
-.Sq \&.\ \ \ \&PP
-are equivalent.
-.Pp
-All
-.Nm
-macros follow the same structural rules:
+at the beginning of the line.  The
+.Sq \(aq
+macro control character is also accepted.  An arbitrary amount of
+whitespace (spaces or tabs) may sit between the control character and
+the macro name.  Thus, the following are equivalent:

 .Bd -literal -offset indent
 .Bd -literal -offset indent

-\&.YO \(lBbody...\(rB
+\&.PP
+\&.\ \ \ PP

 .Ed
 .Pp
 The
 .Ed
 .Pp
 The

-.Dq body
-consists of zero or more arguments to the macro.
-.Pp

 .Nm
 .Nm

-has a primitive notion of multi-line scope for the following macros:
-.Sq \&.TM ,
-.Sq \&.SM ,
-.Sq \&.SB ,
-.Sq \&.BI ,
-.Sq \&.IB ,
-.Sq \&.BR ,
-.Sq \&.RB ,
-.Sq \&.R ,
-.Sq \&.B ,
-.Sq \&.I ,
-.Sq \&.IR
-and
-.Sq \&.RI .
-When these macros are invoked without arguments, the subsequent line is
-considered a continuation of the macro.  Thus:
+macros are classified by scope: line scope or block scope.  Line
+macros are only scoped to the current line (and, in some situations,
+the subsequent line).  Block macros are scoped to the current line and
+subsequent lines until closed by another block macro.
+.Ss Line Macros
+Line macros are generally scoped to the current line, with the body
+consisting of zero or more arguments.  If a macro is scoped to the next
+line and the line arguments are empty, the next line, which must be
+text, is used instead.  Thus:

 .Bd -literal -offset indent
 .Bd -literal -offset indent

-\&.RI
+\&.I

 foo
 .Ed
 .Pp
 is equivalent to
 foo
 .Ed
 .Pp
 is equivalent to

-.Sq \&.RI foo .
-If two consecutive lines exhibit the latter behaviour,
-an error is raised.  Thus, the following is not acceptable:
+.Sq \&.I foo .
+If next-line macros are invoked consecutively, only the last is used.
+If a next-line macro is followed by a non-next-line macro, an error is
+raised (unless in the case of
+.Sx \&br ,
+.Sx \&sp ,
+or
+.Sx \&na ) .
+.Pp
+The syntax is as follows:

 .Bd -literal -offset indent
 .Bd -literal -offset indent

-\&.RI
-\&.I
-Hello, world.
+\&.YO \(lBbody...\(rB
+\(lBbody...\(rB

 .Ed
 .Pp
 .Ed
 .Pp

-The
-.Sq \&.TP
-macro is similar, but does not need an empty argument line to trigger
-the behaviour.
-.\" SECTION
-.Sh MACROS
-This section contains a complete list of all
-.Nm
-macros and corresponding number of arguments.
-.Pp
-.Bl -column "MacroX" "Arguments" -compact -offset indent
-.It Em Macro Ta Em Arguments
-.It \&.TH    Ta    >1, <6
-.It \&.SH    Ta    >0
-.It \&.SS    Ta    >0
-.It \&.TP    Ta    n
-.It \&.LP    Ta    0
-.It \&.PP    Ta    0
-.It \&.P     Ta    0
-.It \&.IP    Ta    <3
-.It \&.HP    Ta    <2
-.It \&.SM    Ta    n
-.It \&.SB    Ta    n
-.It \&.BI    Ta    n
-.It \&.IB    Ta    n
-.It \&.BR    Ta    n
-.It \&.RB    Ta    n
-.It \&.R     Ta    n
-.It \&.B     Ta    n
-.It \&.I     Ta    n
-.It \&.IR    Ta    n
-.It \&.RI    Ta    n
+.Bl -column -compact -offset indent "MacroX" "ArgumentsX" "ScopeXXXXX" "CompatX"
+.It Em Macro Ta Em Arguments Ta Em Scope     Ta Em Notes
+.It Sx \&B   Ta    n         Ta    next-line Ta    \&
+.It Sx \&BI  Ta    n         Ta    current   Ta    \&
+.It Sx \&BR  Ta    n         Ta    current   Ta    \&
+.It Sx \&DT  Ta    0         Ta    current   Ta    \&
+.It Sx \&I   Ta    n         Ta    next-line Ta    \&
+.It Sx \&IB  Ta    n         Ta    current   Ta    \&
+.It Sx \&IR  Ta    n         Ta    current   Ta    \&
+.\" .It Sx \&PD  Ta    n         Ta    current   Ta    compat
+.It Sx \&R   Ta    n         Ta    next-line Ta    \&
+.It Sx \&RB  Ta    n         Ta    current   Ta    \&
+.It Sx \&RI  Ta    n         Ta    current   Ta    \&
+.It Sx \&SB  Ta    n         Ta    next-line Ta    \&
+.It Sx \&SM  Ta    n         Ta    next-line Ta    \&
+.It Sx \&TH  Ta    >1, <6    Ta    current   Ta    \&
+.\" .It Sx \&UC  Ta    n         Ta    current   Ta    compat
+.It Sx \&br  Ta    0         Ta    current   Ta    compat
+.It Sx \&fi  Ta    0         Ta    current   Ta    compat
+.It Sx \&i   Ta    n         Ta    current   Ta    compat
+.It Sx \&na  Ta    0         Ta    current   Ta    compat
+.It Sx \&nf  Ta    0         Ta    current   Ta    compat
+.It Sx \&r   Ta    0         Ta    current   Ta    compat
+.It Sx \&sp  Ta    1         Ta    current   Ta    compat
+.\" .It Sx \&Sp  Ta    0         Ta    current   Ta    compat
+.\" .It Sx \&Vb  Ta    <1        Ta    current   Ta    compat
+.\" .It Sx \&Ve  Ta    0         Ta    current   Ta    compat

 .El
 .Pp
 .El
 .Pp

-Although not historically part of the
+Macros marked as
+.Qq compat
+are included for compatibility with the significant corpus of existing
+manuals that mix dialects of roff.  These macros should not be used for
+portable

 .Nm
 .Nm

-system, the following macros are also supported:
+manuals.
+.Ss Block Macros
+Block macros are comprised of a head and body.  Like for in-line macros,
+the head is scoped to the current line and, in one circumstance, the
+next line (the next-line stipulations as in
+.Sx Line Macros
+apply here as well).

 .Pp
 .Pp

-.Bl -column "MacroX" "Arguments" -compact -offset indent
-.It Em Macro Ta Em Arguments
-.It \&.br    Ta    0
-.It \&.i     Ta    n
+The syntax is as follows:
+.Bd -literal -offset indent
+\&.YO \(lBhead...\(rB
+\(lBhead...\(rB
+\(lBbody...\(rB
+.Ed
+.Pp
+The closure of body scope may be to the section, where a macro is closed
+by
+.Sx \&SH ;
+sub-section, closed by a section or
+.Sx \&SS ;
+part, closed by a section, sub-section, or
+.Sx \&RE ;
+or paragraph, closed by a section, sub-section, part,
+.Sx \&HP ,
+.Sx \&IP ,
+.Sx \&LP ,
+.Sx \&P ,
+.Sx \&PP ,
+or
+.Sx \&TP .
+No closure refers to an explicit block closing macro.
+.Pp
+As a rule, block macros may not be nested; thus, calling a block macro
+while another block macro scope is open, and the open scope is not
+implicitly closed, is syntactically incorrect.
+.Pp
+.Bl -column -compact -offset indent "MacroX" "ArgumentsX" "Head ScopeX" "sub-sectionX" "compatX"
+.It Em Macro Ta Em Arguments Ta Em Head Scope Ta Em Body Scope  Ta Em Notes
+.It Sx \&HP  Ta    <2        Ta    current    Ta    paragraph   Ta    \&
+.It Sx \&IP  Ta    <3        Ta    current    Ta    paragraph   Ta    \&
+.It Sx \&LP  Ta    0         Ta    current    Ta    paragraph   Ta    \&
+.It Sx \&P   Ta    0         Ta    current    Ta    paragraph   Ta    \&
+.It Sx \&PP  Ta    0         Ta    current    Ta    paragraph   Ta    \&
+.It Sx \&RE  Ta    0         Ta    current    Ta    none        Ta    compat
+.It Sx \&RS  Ta    1         Ta    current    Ta    part        Ta    compat
+.It Sx \&SH  Ta    >0        Ta    next-line  Ta    section     Ta    \&
+.It Sx \&SS  Ta    >0        Ta    next-line  Ta    sub-section Ta    \&
+.It Sx \&TP  Ta    n         Ta    next-line  Ta    paragraph   Ta    \&

 .El
 .Pp
 .El
 .Pp

-These follow the same calling conventions as the above
-.Nm
-macros.
-.\" SECTION
-.Sh COMPATIBILITY
+Macros marked
+.Qq compat
+are as mentioned in
+.Sx Line Macros .
+.Pp
+If a block macro is next-line scoped, it may only be followed by in-line
+macros for decorating text.
+.Sh REFERENCE
+This section is a canonical reference to all macros, arranged
+alphabetically.  For the scoping of individual macros, see
+.Sx MACRO SYNTAX .
+.Ss \&B
+Text is rendered in bold face.
+.Pp
+See also
+.Sx \&I ,
+.Sx \&R ,
+.Sx \&b ,
+.Sx \&i ,
+and
+.Sx \&r .
+.Ss \&BI
+Text is rendered alternately in bold face and italic.  Thus,
+.Sq .BI this word and that
+causes
+.Sq this
+and
+.Sq and
+to render in bold face, while
+.Sq word
+and
+.Sq that
+render in italics.  Whitespace between arguments is omitted in output.
+.Pp
+Examples:
+.Pp
+.D1 \&.BI bold italic bold italic
+.Pp
+The output of this example will be emboldened
+.Dq bold
+and italicised
+.Dq italic ,
+with spaces stripped between arguments.
+.Pp
+See also
+.Sx \&IB ,
+.Sx \&BR ,
+.Sx \&RB ,
+.Sx \&RI ,
+and
+.Sx \&IR .
+.Ss \&BR
+Text is rendered alternately in bold face and roman (the default font).
+Whitespace between arguments is omitted in output.
+.Pp

 See
 See

-.Xr mdoc 7
-for groff compatibility notes.
-.\" SECTION
+.Sx \&BI
+for an equivalent example.
+.Pp
+See also
+.Sx \&BI ,
+.Sx \&IB ,
+.Sx \&RB ,
+.Sx \&RI ,
+and
+.Sx \&IR .
+.Ss \&DT
+Has no effect.  Included for compatibility.
+.Ss \&HP
+Begin a paragraph whose initial output line is left-justified, but
+subsequent output lines are indented, with the following syntax:
+.Bd -filled -offset indent
+.Pf \. Sx \&HP
+.Op Cm width
+.Ed
+.Pp
+The
+.Cm width
+argument must conform to
+.Sx Scaling Widths .
+If specified, it's saved for later paragraph left-margins; if unspecified, the
+saved or default width is used.
+.Pp
+See also
+.Sx \&IP ,
+.Sx \&LP ,
+.Sx \&P ,
+.Sx \&PP ,
+and
+.Sx \&TP .
+.Ss \&I
+Text is rendered in italics.
+.Pp
+See also
+.Sx \&B ,
+.Sx \&R ,
+.Sx \&b ,
+.Sx \&i ,
+and
+.Sx \&r .
+.Ss \&IB
+Text is rendered alternately in italics and bold face.  Whitespace
+between arguments is omitted in output.
+.Pp
+See
+.Sx \&BI
+for an equivalent example.
+.Pp
+See also
+.Sx \&BI ,
+.Sx \&BR ,
+.Sx \&RB ,
+.Sx \&RI ,
+and
+.Sx \&IR .
+.Ss \&IP
+Begin an indented paragraph with the following syntax:
+.Bd -filled -offset indent
+.Pf \. Sx \&IP
+.Op Cm head Op Cm width
+.Ed
+.Pp
+The
+.Cm width
+argument defines the width of the left margin and is defined by
+.Sx Scaling Widths ,
+It's saved for later paragraph left-margins; if unspecified, the saved or
+default width is used.
+.Pp
+The
+.Cm head
+argument is used as a leading term, flushed to the left margin.  This is
+useful for bulleted paragraphs and so on.
+.Pp
+See also
+.Sx \&HP ,
+.Sx \&LP ,
+.Sx \&P ,
+.Sx \&PP ,
+and
+.Sx \&TP .
+.Ss \&IR
+Text is rendered alternately in italics and roman (the default font).
+Whitespace between arguments is omitted in output.
+.Pp
+See
+.Sx \&BI
+for an equivalent example.
+.Pp
+See also
+.Sx \&BI ,
+.Sx \&IB ,
+.Sx \&BR ,
+.Sx \&RB ,
+and
+.Sx \&RI .
+.Ss \&LP
+Begin an undecorated paragraph.  The scope of a paragraph is closed by a
+subsequent paragraph, sub-section, section, or end of file.  The saved
+paragraph left-margin width is re-set to the default.
+.Pp
+See also
+.Sx \&HP ,
+.Sx \&IP ,
+.Sx \&P ,
+.Sx \&PP ,
+and
+.Sx \&TP .
+.Ss \&P
+Synonym for
+.Sx \&LP .
+.Pp
+See also
+.Sx \&HP ,
+.Sx \&IP ,
+.Sx \&LP ,
+.Sx \&PP ,
+and
+.Sx \&TP .
+.Ss \&PP
+Synonym for
+.Sx \&LP .
+.Pp
+See also
+.Sx \&HP ,
+.Sx \&IP ,
+.Sx \&LP ,
+.Sx \&P ,
+and
+.Sx \&TP .
+.Ss \&R
+Text is rendered in roman (the default font).
+.Pp
+See also
+.Sx \&I ,
+.Sx \&B ,
+.Sx \&b ,
+.Sx \&i ,
+and
+.Sx \&r .
+.Ss \&RB
+Text is rendered alternately in roman (the default font) and bold face.
+Whitespace between arguments is omitted in output.
+.Pp
+See
+.Sx \&BI
+for an equivalent example.
+.Pp
+See also
+.Sx \&BI ,
+.Sx \&IB ,
+.Sx \&BR ,
+.Sx \&RI ,
+and
+.Sx \&IR .
+.Ss \&RE
+Explicitly close out the scope of a prior
+.Sx \&RS .
+.Ss \&RI
+Text is rendered alternately in roman (the default font) and italics.
+Whitespace between arguments is omitted in output.
+.Pp
+See
+.Sx \&BI
+for an equivalent example.
+.Pp
+See also
+.Sx \&BI ,
+.Sx \&IB ,
+.Sx \&BR ,
+.Sx \&RB ,
+and
+.Sx \&IR .
+.Ss \&RS
+Begin a part setting the left margin.  The left margin controls the
+offset, following an initial indentation, to un-indented text such as
+that of
+.Sx \&PP .
+This has the following syntax:
+.Bd -filled -offset indent
+.Pf \. Sx \&Rs
+.Op Cm width
+.Ed
+.Pp
+The
+.Cm width
+argument must conform to
+.Sx Scaling Widths .
+If not specified, the saved or default width is used.
+.Ss \&SB
+Text is rendered in small size (one point smaller than the default font)
+bold face.
+.Ss \&SH
+Begin a section.  The scope of a section is only closed by another
+section or the end of file.  The paragraph left-margin width is re-set
+to the default.
+.Ss \&SM
+Text is rendered in small size (one point smaller than the default
+font).
+.Ss \&SS
+Begin a sub-section.  The scope of a sub-section is closed by a
+subsequent sub-section, section, or end of file.  The paragraph
+left-margin width is re-set to the default.
+.Ss \&TH
+Sets the title of the manual page with the following syntax:
+.Bd -filled -offset indent
+.Pf \. Sx \&TH
+.Cm title section
+.Op Cm date Op Cm source Op Cm volume
+.Ed
+.Pp
+At least the upper-case document title
+.Cm title
+and numeric manual section
+.Cm section
+arguments must be provided.  The
+.Cm date
+argument should be formatted as described in
+.Sx Dates :
+if it does not conform, the current date is used instead.  The
+.Cm source
+string specifies the organisation providing the utility.  The
+.Cm volume
+string replaces the default rendered volume, which is dictated by the
+manual section.
+.Pp
+Examples:
+.Pp
+.D1 \&.TH CVS 5 "1992-02-12" GNU
+.Ss \&TP
+Begin a paragraph where the head, if exceeding the indentation width, is
+followed by a newline; if not, the body follows on the same line after a
+buffer to the indentation width.  Subsequent output lines are indented.
+The syntax is as follows:
+.Bd -filled -offset indent
+.Pf \. Sx \&TP
+.Op Cm width
+.Ed
+.Pp
+The
+.Cm width
+argument must conform to
+.Sx Scaling Widths .
+If specified, it's saved for later paragraph left-margins; if
+unspecified, the saved or default width is used.
+.Pp
+See also
+.Sx \&HP ,
+.Sx \&IP ,
+.Sx \&LP ,
+.Sx \&P ,
+and
+.Sx \&PP .
+.\" .
+.\" .
+.\" .Ss \&PD
+.\" Has no effect.  Included for compatibility.
+.\" .
+.\" .
+.\" .Ss \&UC
+.\" Has no effect.  Included for compatibility.
+.Ss \&br
+Breaks the current line.  Consecutive invocations have no further effect.
+.Pp
+See also
+.Sx \&sp .
+.Ss \&fi
+End literal mode begun by
+.Sx \&nf .
+.Ss \&i
+Italicise arguments.  Synonym for
+.Sx \&I .
+.Pp
+See also
+.Sx \&B ,
+.Sx \&I ,
+.Sx \&R .
+.Sx \&b ,
+and
+.Sx \&r .
+.Ss \&na
+Don't align to the right margin.
+.Ss \&nf
+Begin literal mode: all subsequent free-form lines have their end of
+line boundaries preserved.  May be ended by
+.Sx \&fi .
+.Ss \&r
+Fonts and styles (bold face, italics) reset to roman (default font).
+.Pp
+See also
+.Sx \&B ,
+.Sx \&I ,
+.Sx \&R ,
+.Sx \&b ,
+and
+.Sx \&i .
+.Ss \&sp
+Insert vertical spaces into output with the following syntax:
+.Bd -filled -offset indent
+.Pf \. Sx \&sp
+.Op Cm height
+.Ed
+.Pp
+Insert
+.Cm height
+spaces, which must conform to
+.Sx Scaling Widths .
+If 0, this is equivalent to the
+.Sx \&br
+macro.  Defaults to 1, if unspecified.
+.Pp
+See also
+.Sx \&br .
+.\" .Ss \&Sp
+.\" A synonym for
+.\" .Sx \&sp
+.\" .Cm 0.5v .
+.\" .
+.\" .Ss \&Vb
+.\" A synonym for
+.\" .Sx \&nf .
+.\" Accepts an argument (the height of the formatted space) which is
+.\" disregarded.
+.\" .
+.\" .Ss \&Ve
+.\" A synonym for
+.\" .Sx \&fi .
+.\" .
+.Sh COMPATIBILITY
+This section documents areas of questionable portability between
+implementations of the
+.Nm
+language.
+.Pp
+.Bl -dash -compact
+.It
+In quoted literals, GNU troff allowed pair-wise double-quotes to produce
+a standalone double-quote in formatted output.  It is not known whether
+this behaviour is exhibited by other formatters.
+.It
+The
+.Sx \&sp
+macro does not accept negative values in mandoc.  In GNU troff, this
+would result in strange behaviour.
+.It
+The
+.Sq \(aq
+macro control character, in GNU troff (and prior troffs) suppresses a
+newline before macro output; in mandoc, it is an alias for the standard
+.Sq \&.
+control character.
+.El

 .Sh SEE ALSO
 .Xr mandoc 1 ,
 .Xr mandoc_char 7
 .Sh SEE ALSO
 .Xr mandoc 1 ,
 .Xr mandoc_char 7

-.\" SECTION

 .Sh AUTHORS
 The
 .Nm
 .Sh AUTHORS
 The
 .Nm

-utility was written by
-.An Kristaps Dzonsons Aq kristaps@kth.se .
-.\" SECTION
+reference was written by
+.An Kristaps Dzonsons Aq kristaps@bsd.lv .

 .Sh CAVEATS
 Do not use this language.  Use
 .Xr mdoc 7 ,
 .Sh CAVEATS
 Do not use this language.  Use
 .Xr mdoc 7 ,