-# $Id: configure.local.example,v 1.15 2016/07/19 21:31:55 schwarze Exp $
+# $Id: configure.local.example,v 1.43 2021/09/20 13:25:42 schwarze Exp $
#
-# Copyright (c) 2014, 2015, 2016 Ingo Schwarze <schwarze@openbsd.org>
+# Copyright (c) 2014-2021 Ingo Schwarze <schwarze@openbsd.org>
#
# Permission to use, copy, modify, and distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# and put any of these settings into it if ./configure autodetection
# fails or if you want to make different choices for other reasons.
-# If autodetection fails, please tell <tech@mdocml.bsd.lv>.
+# If autodetection fails, please tell <tech@mandoc.bsd.lv>.
# We recommend that you write ./configure.local from scratch and
# only put the lines there you need. This file contains examples.
# --- user settings relevant for all builds ----------------------------
+# By default, "cc" is used as the C compiler, but it can be overridden.
+# For example, the system compiler in SunOS 5.9 may not provide <stdint.h>,
+# which may require this line:
+CC=gcc
+
+# IBM AIX may need:
+CC=xlc
+
+# By default, "ar" is used as the library archive builder, but it
+# can be overridden. For example, NixOS may not have ar(1) in the
+# PATH, but may want to specify an absolute path instead.
+AR=ar
+
# For -Tutf8 and -Tlocale operation, mandoc(1) requires <locale.h>
# providing setlocale(3) and <wchar.h> providing wcwidth(3) and
# putwchar(3) with a wchar_t storing UCS-4 values. Theoretically,
HAVE_WCHAR=0
+# For -Tutf8 mode, mandoc needs to set an arbitrary locale having
+# a UTF-8 character set. If autodetection of a suitable locale
+# fails or selects an undesirable locale, you can manually choose
+# the locale for -Tutf8 mode:
+
+UTF8_LOCALE=en_US.UTF-8
+
# When man(1) or apropos(1) is called without -m and -M options,
-# MANPATH is not set in the environment, man.conf(5) is not available
-# and manpath(1) not used, manuals are searched for in the following
-# directory trees by default.
+# MANPATH is not set in the environment, and man.conf(5) is not
+# available, manuals are searched for in the following directory
+# trees by default.
MANPATH_DEFAULT="/usr/share/man:/usr/X11R6/man:/usr/local/man"
+# Validation of cross references with mandoc -Tlint only looks
+# for manual pages in the following directories:
+
+MANPATH_BASE="/usr/share/man:/usr/X11R6/man"
+
+# When man(1) is called with the -S option and no manual page is
+# found matching the requested name and the requested architecture,
+# it tries to figure out whether the requested architecture is valid
+# for the present operating system. Normally, ./configure detects
+# the operating system using uname(1). If that fails or is not
+# desired, either of the following lines can be used:
+
+OSENUM=MANDOC_OS_NETBSD
+OSENUM=MANDOC_OS_OPENBSD
+OSENUM=MANDOC_OS_OTHER
+
# In manual pages written in the mdoc(7) language, the operating system
# version is displayed in the page footer line. If an operating system
# is specified as an argument to the .Os macro, that is always used.
# If you do not want uname(3) to be called but instead want a fixed
# string to be used, use the following line:
-OSNAME="OpenBSD 6.0"
+OSNAME="OpenBSD 7.0"
# The following installation directories are used.
# It is possible to set only one or a few of these variables,
PREFIX="/usr/local"
BINDIR="${PREFIX}/bin"
SBINDIR="${PREFIX}/sbin"
-INCLUDEDIR="${PREFIX}/include/mandoc"
-LIBDIR="${PREFIX}/lib/mandoc"
MANDIR="${PREFIX}/man"
-# The man(1) utility needs to know where the manuals reside.
-# We know of two ways to tell it: via manpath(1) or man.conf(5).
-# The latter is used by OpenBSD and NetBSD, the former by most
-# other systems.
-
-# Force usage of manpath(1).
-# If it is not installed or not operational,
-# man(1), makewhatis(8), and apropos(1) will not work properly.
-HAVE_MANPATH=1
+# If BINDIR and SBINDIR are not subdirectories of the same parent
+# directory or if the basename(1) of BINDIR differs from "bin",
+# the relative path from SBINDIR to BINDIR is also needed.
+# The default is:
-# Force usage of man.conf(5).
-HAVE_MANPATH=0
+BIN_FROM_SBIN="../bin"
# Some distributions may want to avoid naming conflicts
# with the configuration files of other man(1) implementations.
# This changes the name of the installed section 5 manual page as well.
+
MANM_MANCONF="mandoc.conf" # default is "man.conf"
# Some distributions may want to avoid naming conflicts among manuals.
BINM_MAKEWHATIS=mandocdb # default is "makewhatis"
BINM_SOELIM=msoelim # default is "soelim"
+# If less(1) is available, it is used as the default manual pager.
+# Otherwise, more(1) is used: its existence is required by POSIX.
+# It is possible to force using a different default pager, either
+# by giving the name of a program found in the PATH, or by giving
+# an absolute path.
+
+BINM_PAGER=pg # default is "less" or "more"
+
+# Some distributions do not want hardlinks
+# between installed binary programs.
+# Set the following variable to use symbolic links instead.
+# It is also used for links between manual pages.
+# It is only used by the install* targets.
+# When using this, DESTDIR must be empty or an absolute path.
+
+LN="ln -sf" # default is "ln -f"
+
# Before falling back to the bundled version of the ohash(3) hashing
# library, autoconfiguration tries the following linker flag to
# link against your system version. If you do have ohash(3) on
LD_OHASH="-lutil"
-# When library autodetection decides to use -L/usr/local/lib,
-# -I/usr/local/include is automatically added to CFLAGS.
-# If you manually set LD_OHASH to something including -L/usr/local/lib,
-# chances are you will also need the following line:
+# Some platforms may need an additional linker flag for nanosleep(2).
+# If none is needed or it is -lrt, it is autodetected.
+# Otherwise, set the following variable.
+
+LD_NANOSLEEP="-lrt"
+
+# Some platforms may need an additional linker flag for recvmsg(2).
+# If none is needed or it is -lsocket, it is autodetected.
+# Otherwise, set the following variable.
-CFLAGS="${CFLAGS} -I/usr/local/include"
+LD_RECVMSG="-lsocket"
-# Some platforms may need additional linker flags to link against libmandoc
-# that are not autodetected.
-# For example, Solaris 9 and 10 need -lrt for nanosleep(2).
+# Some platforms might need additional linker flags to link against
+# libmandoc that are not autodetected, though no such cases are
+# currently known.
-LDADD="-lrt"
+LDADD="-lm"
# Some systems may want to set additional linker flags for all the
# binaries, not only for those using libmandoc, for example for
INSTALL_MAN="${INSTALL} -m 0444"
INSTALL_DATA="${INSTALL} -m 0444"
-# When using the "homebrew" package manager on Mac OS X, the actual
-# manuals are located in a so-called "cellar" and only symlinked
-# into the manual trees. To allow mandoc to follow such symlinks,
-# you have to specify the physical location of the cellar as returned
-# by realpath(3), for example:
+# By default, makewhatis(8) can only read from the paths passed on the
+# command line or configured in man.conf(5).
+# But some package managers on some operating systems store manual pages
+# in separate "cellar" or "store" directories and only symlink them
+# into the manual trees.
+# To support one or more such package managers, give makewhatis(8)
+# read access to the cellars and stores on your system, in the form
+# of a colon-separated path:
+# Homebrow package manager on Mac OS X:
PREFIX="/usr/local"
-HOMEBREWDIR="${PREFIX}/Cellar"
+READ_ALLOWED_PATH="${PREFIX}/Cellar"
+
+# Nix package manager and/or NixOS Linux distribution:
+READ_ALLOWED_PATH="/nix/store"
+
+# GNU Guix package manager and/or GNU Guix Linux distribution:
+READ_ALLOWED_PATH="/gnu/store"
+
+# If multiple package managers are used concurrently:
+PREFIX="/usr/local"
+READ_ALLOWED_PATH="/nix/store:${PREFIX}/Cellar"
+
+# --- user settings for the mandoc(3) library --------------------------
+
+# By default, libmandoc.a is not installed. It is almost never needed
+# because there is almost no non-mandoc software out there using this
+# library. The one notable exception is NetBSD apropos(1).
+# So, when building for the NetBSD base system - but not for NetBSD
+# ports nor for pkgsrc! - you may want the following:
+
+INSTALL_LIBMANDOC=1
+
+# The following settings are only used when INSTALL_LIBMANDOC is set.
+
+INCLUDEDIR="${PREFIX}/include/mandoc"
+LIBDIR="${PREFIX}/lib/mandoc"
# --- user settings related to man.cgi ---------------------------------
# The remaining settings in this section are only relevant if BUILD_CGI
# is enabled. Otherwise, they have no effect either way.
-# By default, man.cgi(8) is linked statically.
-# Some systems do not support static linking, for example Mac OS X.
-# In that case, use the following line:
+# By default, man.cgi(8) is linked statically if the compiler supports
+# the -static option. If automatic detection fails, you can force
+# static linking of man.cgi(8).
-STATIC=
+STATIC="-static"
-# Some systems, for example Linux, require -pthread for static linking:
+# Some systems may require -pthread for static linking:
STATIC="-static -pthread"
+# If static linking works in general but not with additional libraries
+# like -lrt or -lz, you can force dynamic linking. This may for
+# example be required on SunOS 5.9.
+
+STATIC=" "
+
# Some directories.
# This works just like PREFIX, see above.
HTDOCDIR="${WWWPREFIX}/htdocs"
CGIBINDIR="${WWWPREFIX}/cgi-bin"
-# --- settings that rarely need to be touched --------------------------
-
-# Do not set these variables unless you really need to.
+# --- user settings related to catman ----------------------------------
-# You can manually override the compiler to be used.
-# But that's rarely useful because ./configure asks your make(1)
-# which compiler to use, and that answer will hardly be wrong.
+# By default, building mandocd(8) and catman(8) is disabled.
+# To enable it, use the following line.
+# It does not work on SunOS 5.10 because there is no mkdirat(2)
+# nor on SunOS 5.9 which also lacks CMSG_LEN(3) and CMSG_SPACE(3).
+# It may not work on old releases of Mac OS X either. For example,
+# Mac OS X 10.4 Tiger provides neither mkdirat(2) nor openat(2).
-CC=cc
+BUILD_CATMAN=1
-# IBM AIX may need:
+# Install catman(8) with a different name.
+# See BINM_MAN above for details of how this works.
-CC=xlc
+BINM_CATMAN=mcatman # default is "catman"
-# The default compiler flags are:
+# --- settings that rarely need to be touched --------------------------
-CFLAGS="-g -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings"
+# Do not set these variables unless you really need to.
-# IBM AIX xlc does not support -W; in that case, please use:
+# Normally, leave CFLAGS unset. In that case, -g will automatically
+# be used, and various -W options will be added if the compiler
+# supports them. If you define CFLAGS manually, it will be used
+# unchanged, and nothing will be added.
CFLAGS="-g"
# and will be regarded as failed) or 1 (test will not be run and will
# be regarded as successful).
+HAVE_ATTRIBUTE=0
HAVE_DIRENT_NAMLEN=0
+HAVE_ENDIAN=0
+HAVE_EFTYPE=0
HAVE_ERR=0
-HAVE_FTS=0
+HAVE_FTS=0 # Setting this implies HAVE_FTS_COMPARE_CONST=0.
+HAVE_FTS_COMPARE_CONST=0 # Setting this implies HAVE_FTS=1.
HAVE_GETLINE=0
HAVE_GETSUBOPT=0
HAVE_ISBLANK=0
+HAVE_LESS_T=0
HAVE_MKDTEMP=0
+HAVE_NTOHL=0
+HAVE_O_DIRECTORY=0
HAVE_OHASH=0
+HAVE_PATH_MAX=0
HAVE_PLEDGE=0
HAVE_PROGNAME=0
HAVE_REALLOCARRAY=0
+HAVE_RECALLOCARRAY=0
HAVE_REWB_BSD=0
HAVE_REWB_SYSV=0
HAVE_STRCASESTR=0
HAVE_STRPTIME=0
HAVE_STRSEP=0
HAVE_STRTONUM=0
+HAVE_SYS_ENDIAN=0
HAVE_VASPRINTF=0
HAVE_WCHAR=0
git.ckatri.com / mandoc.git / blobdiff