-.\" $Id: mandoc.1,v 1.242 2020/02/15 15:28:13 schwarze Exp $
+.\" $OpenBSD: mandoc.1,v 1.166 2020/02/15 15:28:01 schwarze Exp $
.\"
+.\" Copyright (c) 2012, 2014-2021 Ingo Schwarze <schwarze@openbsd.org>
.\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
-.\" Copyright (c) 2012, 2014-2020 Ingo Schwarze <schwarze@openbsd.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
-.Dd $Mdocdate: February 15 2020 $
+.Dd $Mdocdate: August 14 2021 $
.Dt MANDOC 1
.Os
.Sh NAME
If the standard output is a terminal device and
.Fl c
is not specified, use
-.Xr more 1
+.Xr less 1
to paginate the output, just like
.Xr man 1
would.
.It Fl c
Copy the formatted manual pages to the standard output without using
-.Xr more 1
+.Xr less 1
to paginate them.
This is the default.
It can be specified to override
input files in
.Xr mdoc 7
output style.
-Specifically, this suppresses the two additional blank lines near the
-top and the bottom of each page, and it implies
+This prints the operating system name rather than the page title
+on the right side of the footer line, and it implies
.Fl O Cm indent Ns =5 .
One useful application is for checking that
.Fl T Cm man
is used for an external style-sheet.
This must be a valid absolute or
relative URI.
+.It Cm tag Ns Op = Ns Ar term
+Same syntax and semantics as for
+.Sx ASCII Output .
+This is implemented by passing a
+.Ic file://
+URI ending in a fragment identifier to the pager
+rather than passing merely a file name.
+When using this argument, use a pager supporting such URIs, for example
+.Bd -literal -offset 3n
+MANPAGER='lynx -force_html' man -T html -O tag=MANPAGER man
+MANPAGER='w3m -T text/html' man -T html -O tag=toc mandoc
+.Ed
+.Pp
+Consequently, for HTML output, this argument does not work with
+.Xr more 1
+or
+.Xr less 1 .
+For example,
+.Ql MANPAGER=less man -T html -O tag=toc mandoc
+does not work because
+.Xr less 1
+does not support
+.Ic file://
+URIs.
.It Cm toc
If an input file contains at least two non-standard sections,
print a table of contents near the beginning of the output.
.Pp
If the input format of a file is
.Xr man 7 ,
-the input is copied to the output, expanding any
-.Xr roff 7
-.Ic so
-requests.
+the input is copied to the output.
The parser is also run, and as usual, the
.Fl W
level controls which
Any non-empty value of the environment variable
.Ev MANPAGER
is used instead of the standard pagination program,
-.Xr more 1 ;
+.Xr less 1 ;
see
.Xr man 1
for details.
.Ev MANPAGER
is not defined.
If neither PAGER nor MANPAGER is defined,
-.Xr more 1
-.Fl s
+.Xr less 1
is used.
Only used if
.Fl a
or
.Ic NetBSD
keyword substitution as conventionally used in these operating systems.
-.It Sy "referenced manual not found"
-.Pq mdoc
-An
-.Ic \&Xr
-macro references a manual page that is not found in the base system.
-The path to look for base system manuals is configurable at compile
-time and defaults to
-.Pa /usr/share/man : /usr/X11R6/man .
.El
.Ss Style suggestions
.Bl -ohang
entries describing the same
.Ic \&Er
number.
+.It Sy "referenced manual not found"
+.Pq mdoc
+An
+.Ic \&Xr
+macro references a manual page that was not found.
+When running with
+.Fl W Cm base ,
+the search is restricted to the base system, by default to
+.Pa /usr/share/man : Ns Pa /usr/X11R6/man .
+This path can be configured at compile time using the
+.Dv MANPATH_BASE
+preprocessor macro.
+When running with
+.Fl W Cm style ,
+the search is done along the full search path as described in the
+.Xr man 1
+manual page, respecting the
+.Fl m
+and
+.Fl M
+command line options, the
+.Ev MANPATH
+environment variable, the
+.Xr man.conf 5
+file and falling back to the default of
+.Pa /usr/share/man : Ns Pa /usr/X11R6/man : Ns Pa /usr/local/man ,
+also configurable at compile time using the
+.Dv MANPATH_DEFAULT
+preprocessor macro.
.It Sy "trailing delimiter"
.Pq mdoc
The last argument of an
request occurs even though the document already switched to no-fill mode
and did not switch back to fill mode yet.
It has no effect.
+.It Sy "input text line longer than 80 bytes"
+Consider breaking the input text line
+at one of the blank characters before column 80.
.It Sy "verbatim \(dq--\(dq, maybe consider using \e(em"
.Pq mdoc
Even though the ASCII output device renders an em-dash as
The section number in a
.Ic \&Dt
line is invalid, but still used.
+.It Sy "filename/section mismatch"
+.Pq mdoc , man
+The name of the input file being processed is known and its file
+name extension starts with a non-zero digit, but the
+.Ic \&Dt
+or
+.Ic \&TH
+macro contains a
+.Ar section
+argument that starts with a different non-zero digit.
+The
+.Ar section
+argument is used as provided anyway.
+Consider checking whether the file name or the argument need a correction.
.It Sy "missing date, using \(dq\(dq"
.Pq mdoc, man
The document was parsed as
A table layout specification contains an opening parenthesis,
but no matching closing parenthesis.
The rest of the input line, starting from the parenthesis, has no effect.
+.It Sy "ignoring excessive spacing in tbl layout"
+.Pq tbl
+A spacing modifier in a table layout is unreasonably large.
+The default spacing of 3n is used instead.
.It Sy "tbl without any data cells"
.Pq tbl
A table does not contain any data cells.
macro or of an undefined macro.
The macro is ignored, and its arguments are handled
as if they were a text line.
+.It Sy "skipping tbl in -Tman mode"
+.Pq mdoc , tbl
+An input file contains the
+.Ic \&TS
+macro.
+This message is only generated in
+.Fl T Cm man
+output mode, where
+.Xr tbl 7
+input is not supported.
+.It Sy "skipping eqn in -Tman mode"
+.Pq mdoc , eqn
+An input file contains the
+.Ic \&EQ
+macro.
+This message is only generated in
+.Fl T Cm man
+output mode, where
+.Xr eqn 7
+input is not supported.
.El
.Ss Bad command line arguments
.Bl -ohang
.Fl O Cm tag
option was specified but the tag was not found in any of the displayed
manual pages.
+.It Sy "\-Tmarkdown unsupported for man(7) input"
+.Pq man
+The
+.Fl T Cm markdown
+option was specified but an input file uses the
+.Xr man 7
+language.
+No output is produced for that input file.
.El
.Sh SEE ALSO
.Xr apropos 1 ,