-.\" $Id: mandoc.1,v 1.93 2011/09/26 20:47:23 schwarze Exp $
+.\" $Id: mandoc.1,v 1.130 2014/12/28 14:42:27 schwarze Exp $
.\"
.\" Copyright (c) 2009, 2010, 2011 Kristaps Dzonsons <kristaps@bsd.lv>
+.\" Copyright (c) 2012, 2014 Ingo Schwarze <schwarze@openbsd.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
-.Dd $Mdocdate: September 26 2011 $
+.Dd $Mdocdate: December 28 2014 $
.Dt MANDOC 1
.Os
.Sh NAME
.Nd format and display UNIX manuals
.Sh SYNOPSIS
.Nm mandoc
-.Op Fl V
+.Op Fl acfhklV
+.Sm off
+.Op Fl I Cm os Li = Ar name
+.Sm on
+.Op Fl K Ns Ar encoding
.Op Fl m Ns Ar format
.Op Fl O Ns Ar option
.Op Fl T Ns Ar output
utility formats
.Ux
manual pages for display.
-The arguments are as follows:
+.Pp
+By default,
+.Nm
+reads
+.Xr mdoc 7
+or
+.Xr man 7
+text from stdin, implying
+.Fl m Ns Cm andoc ,
+and produces
+.Fl T Ns Cm locale
+output.
+.Pp
+The options are as follows:
.Bl -tag -width Ds
+.It Fl a
+If the standard output is a terminal device and
+.Fl c
+is not specified, use
+.Xr more 1
+to paginate the output, just like
+.Xr man 1
+would.
+.It Fl c
+Copy the formatted manual pages to the standard output without using
+.Xr more 1
+to paginate them.
+This is the default.
+It can be specified to override
+.Fl a .
+.It Fl f
+A synonym for
+.Xr whatis 1 .
+This overrides any earlier
+.Fl k
+and
+.Fl l
+options.
+.Sm off
+.It Fl I Cm os Li = Ar name
+.Sm on
+Override the default operating system
+.Ar name
+for the
+.Xr mdoc 7
+.Sq \&Os
+and for the
+.Xr man 7
+.Sq \&TH
+macro.
+.It Fl h
+Display only the SYNOPSIS lines.
+Implies
+.Fl c .
+.It Fl K Ns Ar encoding
+Specify the input encoding.
+The supported
+.Ar encoding
+arguments are
+.Cm us-ascii ,
+.Cm iso-8859-1 ,
+and
+.Cm utf-8 .
+If not specified, autodetection uses the first match:
+.Bl -tag -width iso-8859-1
+.It Cm utf-8
+if the first three bytes of the input file
+are the UTF-8 byte order mark (BOM, 0xefbbbf)
+.It Ar encoding
+if the first or second line of the input file matches the
+.Sy emacs
+mode line format
+.Pp
+.D1 .\e" -*- Oo ...; Oc coding: Ar encoding ; No -*-
+.It Cm utf-8
+if the first non-ASCII byte in the file introduces a valid UTF-8 sequence
+.It Cm iso-8859-1
+otherwise
+.El
+.It Fl k
+A synonym for
+.Xr apropos 1 .
+This overrides any earlier
+.Fl f
+and
+.Fl l
+options.
+.It Fl l
+A synonym for
+.Fl a .
+Also reverts any earlier
+.Fl f
+and
+.Fl k
+options.
.It Fl m Ns Ar format
Input format.
See
.Sx Output Formats
for available formats.
Defaults to
-.Fl T Ns Cm ascii .
+.Fl T Ns Cm locale .
.It Fl V
Print version and exit.
.It Fl W Ns Ar level
will halt with the first failed parse.
.El
.Pp
-By default,
+In
+.Fl f
+and
+.Fl k
+mode,
.Nm
-reads
-.Xr mdoc 7
-or
-.Xr man 7
-text from stdin, implying
-.Fl m Ns Cm andoc ,
-and produces
-.Fl T Ns Cm ascii
-output.
+also supports the options
+.Fl CMmOSsw
+described in the
+.Xr apropos 1
+manual.
.Ss Input Formats
The
.Nm
.Bl -tag -width "-Tlocale"
.It Fl T Ns Cm ascii
Produce 7-bit ASCII output.
-This is the default.
See
.Sx ASCII Output .
.It Fl T Ns Cm html
-Produce strict CSS1/HTML-4.01 output.
+Produce HTML5, CSS1, and MathML output.
See
.Sx HTML Output .
.It Fl T Ns Cm lint
.Fl W Ns Cm warning .
.It Fl T Ns Cm locale
Encode output using the current locale.
+This is the default.
See
.Sx Locale Output .
.It Fl T Ns Cm man
-Produce output in
+Produce
.Xr man 7
-format; only useful when applied to
-.Fl m Ns Cm doc
-input.
+format output.
+See
+.Sx Man Output .
.It Fl T Ns Cm pdf
Produce PDF output.
See
See
.Sx UTF\-8 Output .
.It Fl T Ns Cm xhtml
-Produce strict CSS1/XHTML-1.0 output.
-See
-.Sx XHTML Output .
+This is a synonym for
+.Fl T Ns Cm html .
.El
.Pp
If multiple input files are specified, these will be processed by the
corresponding filter in-order.
.Ss ASCII Output
Output produced by
-.Fl T Ns Cm ascii ,
-which is the default, is rendered in standard 7-bit ASCII documented in
+.Fl T Ns Cm ascii
+is rendered in standard 7-bit ASCII documented in
.Xr ascii 7 .
.Pp
Font styles are applied by using back-spaced encoding such that an
.Fl O
arguments are accepted:
.Bl -tag -width Ds
+.It Cm indent Ns = Ns Ar indent
+The left margin for normal text is set to
+.Ar indent
+blank characters instead of the default of five for
+.Xr mdoc 7
+and seven for
+.Xr man 7 .
+Increasing this is not recommended; it may result in degraded formatting,
+for example overfull lines or ugly line breaks.
.It Cm width Ns = Ns Ar width
The output width is set to
.Ar width ,
.Ss HTML Output
Output produced by
.Fl T Ns Cm html
-conforms to HTML-4.01 strict.
+conforms to HTML5 using optional self-closing tags.
+Default styles use only CSS1.
+Equations rendered from
+.Xr eqn 7
+blocks use MathML.
.Pp
The
.Pa example.style.css
If a style-sheet is not specified with
.Fl O Ns Ar style ,
.Fl T Ns Cm html
-defaults to simple output readable in any graphical or text-based web
+defaults to simple output (via an embedded style-sheet)
+readable in any graphical or text-based web
browser.
.Pp
Special characters are rendered in decimal-encoded UTF\-8.
.Fl O
arguments are accepted:
.Bl -tag -width Ds
+.It Cm fragment
+Omit the <!DOCTYPE> declaration and the <html>, <head>, and <body>
+elements and only emit the subtree below the <body> element.
+The
+.Cm style
+argument will be ignored.
+This is useful when embedding manual content within existing documents.
.It Cm includes Ns = Ns Ar fmt
The string
.Ar fmt ,
.Ss Locale Output
Locale-depending output encoding is triggered with
.Fl T Ns Cm locale .
+This is the default.
+.Pp
This option is not available on all systems: systems without locale
support, or those whose internal representation is not natively UCS-4,
will fall back to
See
.Sx ASCII Output
for font style specification and available command-line arguments.
+.Ss Man Output
+Translate input format into
+.Xr man 7
+output format.
+This is useful for distributing manual sources to legacy systems
+lacking
+.Xr mdoc 7
+formatters.
+.Pp
+If
+.Xr mdoc 7
+is passed as input, it is translated into
+.Xr man 7 .
+If the input format is
+.Xr man 7 ,
+the input is copied to the output, expanding any
+.Xr roff 7
+.Sq so
+requests.
+The parser is also run, and as usual, the
+.Fl W
+level controls which
+.Sx DIAGNOSTICS
+are displayed before copying the input to the output.
.Ss PDF Output
PDF-1.1 output may be generated by
.Fl T Ns Cm pdf .
See
.Sx Locale Output
for details and options.
-.Ss XHTML Output
-Output produced by
-.Fl T Ns Cm xhtml
-conforms to XHTML-1.0 strict.
-.Pp
-See
-.Sx HTML Output
-for details; beyond generating XHTML tags instead of HTML tags, these
-output modes are identical.
+.Sh ENVIRONMENT
+.Bl -tag -width MANPAGER
+.It Ev MANPAGER
+Any non-empty value of the environment variable
+.Ev MANPAGER
+will be used instead of the standard pagination program,
+.Xr more 1 .
+.It Ev PAGER
+Specifies the pagination program to use when
+.Ev MANPAGER
+is not defined.
+If neither PAGER nor MANPAGER is defined,
+.Pa /usr/bin/more Fl s
+will be used.
+.El
.Sh EXIT STATUS
The
.Nm
.Pp
.Dl $ mandoc \-Tman foo.mdoc \*(Gt foo.man
.Sh DIAGNOSTICS
-Standard error messages reporting parsing errors are prefixed by
+Messages displayed by
+.Nm
+follow this format:
.Pp
-.Sm off
-.D1 Ar file : line : column : \ level :
-.Sm on
+.D1 Nm Ns : Ar file : Ns Ar line : Ns Ar column : level : message : macro args
.Pp
-where the fields have the following meanings:
-.Bl -tag -width "column"
-.It Ar file
-The name of the input file causing the message.
-.It Ar line
-The line number in that input file.
-Line numbering starts at 1.
-.It Ar column
-The column number in that input file.
-Column numbering starts at 1.
-If the issue is caused by a word, the column number usually
-points to the first character of the word.
-.It Ar level
-The message level, printed in capital letters.
-.El
+Line and column numbers start at 1.
+Both are omitted for messages referring to an input file as a whole.
+Macro names and arguments are omitted where meaningless.
+Fatal messages about invalid command line arguments
+or operating system errors, for example when memory is exhausted,
+may also omit the
+.Ar file
+and
+.Ar level
+fields.
.Pp
Message levels have the following meanings:
.Bl -tag -width "warning"
+.It Cm syserr
+Opening or reading an input file failed, so the parser cannot
+even be started and no output is produced from that input file.
.It Cm fatal
The parser is unable to parse a given input file at all.
No formatted output is produced from that input file.
option or
.Fl T Ns Cm lint
output mode.
-.Pp
+.Ss Warnings related to the document prologue
+.Bl -ohang
+.It Sy "missing manual title, using UNTITLED"
+.Pq mdoc
+A
+.Ic \&Dt
+macro has no arguments, or there is no
+.Ic \&Dt
+macro before the first non-prologue macro.
+.It Sy "missing manual title, using \(dq\(dq"
+.Pq man
+There is no
+.Ic \&TH
+macro, or it has no arguments.
+.It Sy "lower case character in document title"
+.Pq mdoc , man
+The title is still used as given in the
+.Ic \&Dt
+or
+.Ic \&TH
+macro.
+.It Sy "missing manual section, using \(dq\(dq"
+.Pq mdoc , man
+A
+.Ic \&Dt
+or
+.Ic \&TH
+macro lacks the mandatory section argument.
+.It Sy "unknown manual section"
+.Pq mdoc
+The section number in a
+.Ic \&Dt
+line is invalid, but still used.
+.It Sy "missing date, using today's date"
+.Pq mdoc, man
+The document was parsed as
+.Xr mdoc 7
+and it has no
+.Ic \&Dd
+macro, or the
+.Ic \&Dd
+macro has no arguments or only empty arguments;
+or the document was parsed as
+.Xr man 7
+and it has no
+.Ic \&TH
+macro, or the
+.Ic \&TH
+macro has less than three arguments or its third argument is empty.
+.It Sy "cannot parse date, using it verbatim"
+.Pq mdoc , man
+The date given in a
+.Ic \&Dd
+or
+.Ic \&TH
+macro does not follow the conventional format.
+.It Sy "missing Os macro, using \(dq\(dq"
+.Pq mdoc
+The default or current system is not shown in this case.
+.It Sy "duplicate prologue macro"
+.Pq mdoc
+One of the prologue macros occurs more than once.
+The last instance overrides all previous ones.
+.It Sy "late prologue macro"
+.Pq mdoc
+A
+.Ic \&Dd
+or
+.Ic \&Os
+macro occurs after some non-prologue macro, but still takes effect.
+.It Sy "skipping late title macro"
+.Pq mdoc
+The
+.Ic \&Dt
+macro can only occur before the first non-prologue macro
+because traditional formatters write the page header
+before parsing the document body.
+Even though this technical restriction does not apply to
+.Nm ,
+traditional semantics is preserved.
+The late macro is discarded including its arguments.
+.It Sy "prologue macros out of order"
+.Pq mdoc
+The prologue macros are not given in the conventional order
+.Ic \&Dd ,
+.Ic \&Dt ,
+.Ic \&Os .
+All three macros are used even when given in another order.
+.El
+.Ss Warnings regarding document structure
+.Bl -ohang
+.It Sy ".so is fragile, better use ln(1)"
+.Pq roff
+Including files only works when the parser program runs with the correct
+current working directory.
+.It Sy "no document body"
+.Pq mdoc , man
+The document body contains neither text nor macros.
+An empty document is shown, consisting only of a header and a footer line.
+.It Sy "content before first section header"
+.Pq mdoc , man
+Some macros or text precede the first
+.Ic \&Sh
+or
+.Ic \&SH
+section header.
+The offending macros and text are parsed and added to the top level
+of the syntax tree, outside any section block.
+.It Sy "first section is not NAME"
+.Pq mdoc
+The argument of the first
+.Ic \&Sh
+macro is not
+.Sq NAME .
+This may confuse
+.Xr makewhatis 8
+and
+.Xr apropos 1 .
+.It Sy "bad NAME section contents"
+.Pq mdoc
+The last node in the NAME section is not an
+.Ic \&Nd
+macro, or any preceding macro is not
+.Ic \&Nm ,
+or the NAME section is completely empty.
+This may confuse
+.Xr makewhatis 8
+and
+.Xr apropos 1 .
+.It Sy "sections out of conventional order"
+.Pq mdoc
+A standard section occurs after another section it usually precedes.
+All section titles are used as given,
+and the order of sections is not changed.
+.It Sy "duplicate section title"
+.Pq mdoc
+The same standard section title occurs more than once.
+.It Sy "unexpected section"
+.Pq mdoc
+A standard section header occurs in a section of the manual
+where it normally isn't useful.
+.It Sy "unusual Xr order"
+.Pq mdoc
+In the SEE ALSO section, an
+.Ic \&Xr
+macro with a lower section number follows one with a higher number,
+or two
+.Ic \&Xr
+macros refering to the same section are out of alphabetical order.
+.It Sy "unusual Xr punctuation"
+.Pq mdoc
+In the SEE ALSO section, punctuation between two
+.Ic \&Xr
+macros differs from a single comma, or there is trailing punctuation
+after the last
+.Ic \&Xr
+macro.
+.It Sy "AUTHORS section without An macro"
+.Pq mdoc
+An AUTHORS sections contains no
+.Ic \&An
+macros, or only empty ones.
+Probably, there are author names lacking markup.
+.El
+.Ss "Warnings related to macros and nesting"
+.Bl -ohang
+.It Sy "obsolete macro"
+.Pq mdoc
+See the
+.Xr mdoc 7
+manual for replacements.
+.It Sy "macro neither callable nor escaped"
+.Pq mdoc
+The name of a macro that is not callable appears on a macro line.
+It is printed verbatim.
+If the intention is to call it, move it to its own line;
+otherwise, escape it by prepending
+.Sq \e& .
+.It Sy "skipping paragraph macro"
+In
+.Xr mdoc 7
+documents, this happens
+.Bl -dash -compact
+.It
+at the beginning and end of sections and subsections
+.It
+right before non-compact lists and displays
+.It
+at the end of items in non-column, non-compact lists
+.It
+and for multiple consecutive paragraph macros.
+.El
+In
+.Xr man 7
+documents, it happens
+.Bl -dash -compact
+.It
+for empty
+.Ic \&P ,
+.Ic \&PP ,
+and
+.Ic \&LP
+macros
+.It
+for
+.Ic \&IP
+macros having neither head nor body arguments
+.It
+for
+.Ic \&br
+or
+.Ic \&sp
+right after
+.Ic \&SH
+or
+.Ic \&SS
+.El
+.It Sy "moving paragraph macro out of list"
+.Pq mdoc
+A list item in a
+.Ic \&Bl
+list contains a trailing paragraph macro.
+The paragraph macro is moved after the end of the list.
+.It Sy "skipping no-space macro"
+.Pq mdoc
+An input line begins with an
+.Ic \&Ns
+macro.
+The macro is ignored.
+.It Sy "blocks badly nested"
+.Pq mdoc
+If two blocks intersect, one should completely contain the other.
+Otherwise, rendered output is likely to look strange in any output
+format, and rendering in SGML-based output formats is likely to be
+outright wrong because such languages do not support badly nested
+blocks at all.
+Typical examples of badly nested blocks are
+.Qq Ic \&Ao \&Bo \&Ac \&Bc
+and
+.Qq Ic \&Ao \&Bq \&Ac .
+In these examples,
+.Ic \&Ac
+breaks
+.Ic \&Bo
+and
+.Ic \&Bq ,
+respectively.
+.It Sy "nested displays are not portable"
+.Pq mdoc
+A
+.Ic \&Bd ,
+.Ic \&D1 ,
+or
+.Ic \&Dl
+display occurs nested inside another
+.Ic \&Bd
+display.
+This works with
+.Nm ,
+but fails with most other implementations.
+.It Sy "moving content out of list"
+.Pq mdoc
+A
+.Ic \&Bl
+list block contains text or macros before the first
+.Ic \&It
+macro.
+The offending children are moved before the beginning of the list.
+.It Sy ".Vt block has child macro"
+.Pq mdoc
+The
+.Ic \&Vt
+macro supports plain text arguments only.
+Formatting may be ugly and semantic searching
+for the affected content might not work.
+.It Sy "fill mode already enabled, skipping"
+.Pq man
+A
+.Ic \&fi
+request occurs even though the document is still in fill mode,
+or already switched back to fill mode.
+It has no effect.
+.It Sy "fill mode already disabled, skipping"
+.Pq man
+An
+.Ic \&nf
+request occurs even though the document already switched to no-fill mode
+and did not switch back to fill mode yet.
+It has no effect.
+.It Sy "line scope broken"
+.Pq man
+While parsing the next-line scope of the previous macro,
+another macro is found that prematurely terminates the previous one.
+The previous, interrupted macro is deleted from the parse tree.
+.El
+.Ss "Warnings related to missing arguments"
+.Bl -ohang
+.It Sy "skipping empty request"
+.Pq roff , eqn
+The macro name is missing from a macro definition request,
+or an
+.Xr eqn 7
+control statement or operation keyword lacks its required argument.
+.It Sy "conditional request controls empty scope"
+.Pq roff
+A conditional request is only useful if any of the following
+follows it on the same logical input line:
+.Bl -dash -compact
+.It
+The
+.Sq \e{
+keyword to open a multi-line scope.
+.It
+A request or macro or some text, resulting in a single-line scope.
+.It
+The immediate end of the logical line without any intervening whitespace,
+resulting in next-line scope.
+.El
+Here, a conditional request is followed by trailing whitespace only,
+and there is no other content on its logical input line.
+Note that it doesn't matter whether the logical input line is split
+across multiple physical input lines using
+.Sq \e
+line continuation characters.
+This is one of the rare cases
+where trailing whitespace is syntactically significant.
+The conditional request controls a scope containing whitespace only,
+so it is unlikely to have a significant effect,
+except that it may control a following
+.Ic \&el
+clause.
+.It Sy "skipping empty macro"
+.Pq mdoc
+The indicated macro has no arguments and hence no effect.
+.It Sy "empty argument, using 0n"
+.Pq mdoc
+The required width is missing after
+.Ic \&Bd
+or
+.Ic \&Bl
+.Fl offset
+or
+.Fl width.
+.It Sy "argument count wrong"
+.Pq mdoc , man
+The indicated macro has too few or too many arguments.
+The syntax tree will contain the wrong number of arguments as given.
+Formatting behaviour depends on the specific macro in question.
+Note that the same message may also occur as an ERROR, see below.
+.It Sy "missing display type, using -ragged"
+.Pq mdoc
+The
+.Ic \&Bd
+macro is invoked without the required display type.
+.It Sy "list type is not the first argument"
+.Pq mdoc
+In a
+.Ic \&Bl
+macro, at least one other argument precedes the type argument.
+The
+.Nm
+utility copes with any argument order, but some other
+.Xr mdoc 7
+implementations do not.
+.It Sy "missing -width in -tag list, using 8n"
+.Pq mdoc
+Every
+.Ic \&Bl
+macro having the
+.Fl tag
+argument requires
+.Fl width ,
+too.
+.It Sy "missing utility name, using \(dq\(dq"
+.Pq mdoc
+The
+.Ic \&Ex Fl std
+macro is called without an argument before
+.Ic \&Nm
+has first been called with an argument.
+.It Sy "empty head in list item"
+.Pq mdoc
+In a
+.Ic \&Bl
+.Fl diag ,
+.Fl hang ,
+.Fl inset ,
+.Fl ohang ,
+or
+.Fl tag
+list, an
+.Ic \&It
+macro lacks the required argument.
+The item head is left empty.
+.It Sy "empty list item"
+.Pq mdoc
+In a
+.Ic \&Bl
+.Fl bullet ,
+.Fl dash ,
+.Fl enum ,
+or
+.Fl hyphen
+list, an
+.Ic \&It
+block is empty.
+An empty list item is shown.
+.It Sy "missing font type"
+.Pq mdoc
+A
+.Ic \&Bf
+macro has no argument.
+It switches to the default font,
+.Cm \efR .
+.It Sy "unknown font type"
+.Pq mdoc
+The
+.Ic \&Bf
+argument is invalid.
+The default font
+.Cm \efR
+is used instead.
+.It Sy "nothing follows prefix"
+.Pq mdoc
+A
+.Ic \&Pf
+macro has no argument, or only one argument and no macro follows
+on the same input line.
+This defeats its purpose; in particular, spacing is not suppressed
+before the text or macros following on the next input line.
+.It Sy "missing -std argument, adding it"
+.Pq mdoc
+An
+.Ic \&Ex
+or
+.Ic \&Rv
+macro lacks the required
+.Fl std
+argument.
+The
+.Nm
+utility assumes
+.Fl std
+even when it is not specified, but other implementations may not.
+.It Sy "missing eqn box, using \(dq\(dq"
+.Pq eqn
+A diacritic mark or a binary operator is found,
+but there is nothing to the left of it.
+An empty box is inserted.
+.El
+.Ss "Warnings related to bad macro arguments"
+.Bl -ohang
+.It Sy "unterminated quoted argument"
+.Pq roff
+Macro arguments can be enclosed in double quote characters
+such that space characters and macro names contained in the quoted
+argument need not be escaped.
+The closing quote of the last argument of a macro can be omitted.
+However, omitting it is not recommended because it makes the code
+harder to read.
+.It Sy "duplicate argument"
+.Pq mdoc
+A
+.Ic \&Bd
+or
+.Ic \&Bl
+macro has more than one
+.Fl compact ,
+more than one
+.Fl offset ,
+or more than one
+.Fl width
+argument.
+All but the last instances of these arguments are ignored.
+.It Sy "skipping duplicate argument"
+.Pq mdoc
+An
+.Ic \&An
+macro has more than one
+.Fl split
+or
+.Fl nosplit
+argument.
+All but the first of these arguments are ignored.
+.It Sy "skipping duplicate display type"
+.Pq mdoc
+A
+.Ic \&Bd
+macro has more than one type argument; the first one is used.
+.It Sy "skipping duplicate list type"
+.Pq mdoc
+A
+.Ic \&Bl
+macro has more than one type argument; the first one is used.
+.It Sy "skipping -width argument"
+.Pq mdoc
+A
+.Ic \&Bl
+.Fl column ,
+.Fl diag ,
+.Fl ohang ,
+.Fl inset ,
+or
+.Fl item
+list has a
+.Fl width
+argument.
+That has no effect.
+.It Sy "unknown AT&T UNIX version"
+.Pq mdoc
+An
+.Ic \&At
+macro has an invalid argument.
+It is used verbatim, with
+.Qq "AT&T UNIX "
+prefixed to it.
+.It Sy "comma in function argument"
+.Pq mdoc
+An argument of an
+.Ic \&Fa
+or
+.Ic \&Fn
+macro contains a comma; it should probably be split into two arguments.
+.It Sy "parenthesis in function name"
+.Pq mdoc
+The first argument of an
+.Ic \&Fc
+or
+.Ic \&Fn
+macro contains an opening or closing parenthesis; that's probably wrong,
+parentheses are added automatically.
+.It Sy "invalid content in Rs block"
+.Pq mdoc
+An
+.Ic \&Rs
+block contains plain text or non-% macros.
+The bogus content is left in the syntax tree.
+Formatting may be poor.
+.It Sy "invalid Boolean argument"
+.Pq mdoc
+An
+.Ic \&Sm
+macro has an argument other than
+.Cm on
+or
+.Cm off .
+The invalid argument is moved out of the macro, which leaves the macro
+empty, causing it to toggle the spacing mode.
+.It Sy "unknown font, skipping request"
+.Pq man , tbl
+A
+.Xr roff 7
+.Ic \&ft
+request or a
+.Xr tbl 7
+.Ic \&f
+layout modifier has an unknown
+.Ar font
+argument.
+.El
+.Ss "Warnings related to plain text"
+.Bl -ohang
+.It Sy "blank line in fill mode, using .sp"
+.Pq mdoc
+The meaning of blank input lines is only well-defined in non-fill mode:
+In fill mode, line breaks of text input lines are not supposed to be
+significant.
+However, for compatibility with groff, blank lines in fill mode
+are replaced with
+.Ic \&sp
+requests.
+.It Sy "tab in filled text"
+.Pq mdoc , man
+The meaning of tab characters is only well-defined in non-fill mode:
+In fill mode, whitespace is not supposed to be significant
+on text input lines.
+As an implementation dependent choice, tab characters on text lines
+are passed through to the formatters in any case.
+Given that the text before the tab character will be filled,
+it is hard to predict which tab stop position the tab will advance to.
+.It Sy "whitespace at end of input line"
+.Pq mdoc , man , roff
+Whitespace at the end of input lines is almost never semantically
+significant \(em but in the odd case where it might be, it is
+extremely confusing when reviewing and maintaining documents.
+.It Sy "bad comment style"
+.Pq roff
+Comment lines start with a dot, a backslash, and a double-quote character.
+The
+.Nm
+utility treats the line as a comment line even without the backslash,
+but leaving out the backslash might not be portable.
+.It Sy "invalid escape sequence"
+.Pq roff
+An escape sequence has an invalid opening argument delimiter, lacks the
+closing argument delimiter, or the argument has too few characters.
+If the argument is incomplete,
+.Ic \e*
+and
+.Ic \en
+expand to an empty string,
+.Ic \eB
+to the digit
+.Sq 0 ,
+and
+.Ic \ew
+to the length of the incomplete argument.
+All other invalid escape sequences are ignored.
+.It Sy "undefined string, using \(dq\(dq"
+.Pq roff
+If a string is used without being defined before,
+its value is implicitly set to the empty string.
+However, defining strings explicitly before use
+keeps the code more readable.
+.El
+.Ss "Errors related to equations"
+.Bl -inset -compact
+.It "unexpected equation scope closure"
+.It "equation scope open on exit"
+.It "overlapping equation scopes"
+.It "unexpected end of equation"
+.El
+.Ss "Errors related to tables"
+.Bl -inset -compact
+.It "bad table syntax"
+.It "bad table option"
+.It "bad table layout"
+.It "no table layout cells specified"
+.It "no table data cells specified"
+.It "ignore data in cell"
+.It "data block still open"
+.It "ignoring extra data cells"
+.It "ignoring macro in table"
+.El
+.Ss "Errors related to roff, mdoc, and man code"
+.Bl -ohang
+.It Sy "input stack limit exceeded, infinite loop?"
+.Pq roff
+Explicit recursion limits are implemented for the following features,
+in order to prevent infinite loops:
+.Bl -dash -compact
+.It
+expansion of nested escape sequences
+including expansion of strings and number registers,
+.It
+expansion of nested user-defined macros,
+.It
+and
+.Ic \&so
+file inclusion.
+.El
+When a limit is hit, the output is incorrect, typically losing
+some content, but the parser can continue.
+.It Sy "skipping bad character"
+.Pq mdoc , man , roff
+The input file contains a byte that is not a printable
+.Xr ascii 7
+character.
+The message mentions the character number.
+The offending byte is replaced with a question mark
+.Pq Sq \&? .
+Consider editing the input file to replace the byte with an ASCII
+transliteration of the intended character.
+.It Sy "skipping unknown macro"
+.Pq mdoc , man , roff
+The first identifier on a request or macro line is neither recognized as a
+.Xr roff 7
+request, nor as a user-defined macro, nor, respectively, as an
+.Xr mdoc 7
+or
+.Xr man 7
+macro.
+It may be mistyped or unsupported.
+The request or macro is discarded including its arguments.
+.It Sy "skipping item outside list"
+.Pq mdoc , eqn
+An
+.Ic \&It
+macro occurs outside any
+.Ic \&Bl
+list, or an
+.Xr eqn 7
+.Ic above
+delimiter occurs outside any pile.
+It is discarded including its arguments.
+.It Sy "skipping column outside column list"
+.Pq mdoc
+A
+.Ic \&Ta
+macro occurs outside any
+.Ic \&Bl Fl column
+block.
+It is discarded including its arguments.
+.It Sy "skipping end of block that is not open"
+.Pq mdoc , man , eqn , tbl , roff
+Various syntax elements can only be used to explicitly close blocks
+that have previously been opened.
+An
+.Xr mdoc 7
+block closing macro, a
+.Xr man 7
+.Ic \&RE
+or
+.Ic \&UE
+macro, an
+.Xr eqn 7
+right delimiter or closing brace, or the end of an equation, table, or
+.Xr roff 7
+conditional request is encountered but no matching block is open.
+The offending request or macro is discarded.
+.It Sy "inserting missing end of block"
+.Pq mdoc , tbl
+Various
+.Xr mdoc 7
+macros as well as tables require explicit closing by dedicated macros.
+A block that doesn't support bad nesting
+ends before all of its children are properly closed.
+The open child nodes are closed implicitly.
+.It Sy "scope open on exit"
+.Pq mdoc , man , eqn , tbl , roff
+At the end of the document, an explicit
+.Xr mdoc 7
+block, a
+.Xr man 7
+next-line scope or
+.Ic \&RS
+or
+.Ic \&UR
+block, an equation, table, or
+.Xr roff 7
+conditional or ignore block is still open.
+The open block is closed implicitly.
+.It Sy "escaped character not allowed in a name"
+.Pq roff
+Macro, string and register identifiers consist of printable,
+non-whitespace ASCII characters.
+Escape sequences and characters and strings expressed in terms of them
+cannot form part of a name.
+The first argument of an
+.Ic \&am ,
+.Ic \&as ,
+.Ic \&de ,
+.Ic \&ds ,
+.Ic \&nr ,
+or
+.Ic \&rr
+request, or any argument of an
+.Ic \&rm
+request, or the name of a request or user defined macro being called,
+is terminated by an escape sequence.
+In the cases of
+.Ic \&as ,
+.Ic \&ds ,
+and
+.Ic \&nr ,
+the request has no effect at all.
+In the cases of
+.Ic \&am ,
+.Ic \&de ,
+.Ic \&rr ,
+and
+.Ic \&rm ,
+what was parsed up to this point is used as the arguments to the request,
+and the rest of the input line is discarded including the escape sequence.
+When parsing for a request or a user-defined macro name to be called,
+only the escape sequence is discarded.
+The characters preceding it are used as the request or macro name,
+the characters following it are used as the arguments to the request or macro.
+.It Sy "argument count wrong"
+.Pq mdoc , man , roff
+The indicated request or macro has too few or too many arguments.
+The syntax tree will contain the wrong number of arguments as given.
+Formatting behaviour depends on the specific request or macro in question.
+Note that the same message may also occur as a WARNING, see above.
+.It Sy "NOT IMPLEMENTED: Bd -file"
+.Pq mdoc
+For security reasons, the
+.Ic \&Bd
+macro does not support the
+.Fl file
+argument.
+By requesting the inclusion of a sensitive file, a malicious document
+might otherwise trick a privileged user into inadvertently displaying
+the file on the screen, revealing the file content to bystanders.
+The argument is ignored including the file name following it.
+.It Sy "missing list type, using -item"
+.Pq mdoc
+A
+.Ic \&Bl
+macro fails to specify the list type.
+.It Sy "missing manual name, using \(dq\(dq"
+.Pq mdoc
+The first call to
+.Ic \&Nm
+lacks the required argument.
+.It Sy "uname(3) system call failed, using UNKNOWN"
+.Pq mdoc
+The
+.Ic \&Os
+macro is called without arguments, and the
+.Xr uname 3
+system call failed.
+As a workaround,
+.Nm
+can be compiled with
+.Sm off
+.Fl D Cm OSNAME=\(dq\e\(dq Ar string Cm \e\(dq\(dq .
+.Sm on
+.It Sy "unknown standard specifier"
+.Pq mdoc
+An
+.Ic \&St
+macro has an unknown argument and is discarded.
+.It Sy "skipping request without numeric argument"
+.Pq roff , eqn
+An
+.Ic \&it
+request or an
+.Xr eqn 7
+.Ic \&size
+or
+.Ic \&gsize
+statement has a non-numeric or negative argument or no argument at all.
+The invalid request or statement is ignored.
+.It Sy "skipping all arguments"
+.Pq mdoc , man , eqn , roff
+An
+.Xr mdoc 7
+.Ic \&Bt ,
+.Ic \&Ed ,
+.Ic \&Ef ,
+.Ic \&Ek ,
+.Ic \&El ,
+.Ic \&Re ,
+or
+.Ic \&Ud
+macro, an
+.Ic \&It
+macro in a list that don't support item heads, a
+.Xr man 7
+.Ic \&LP ,
+.Ic \&P ,
+or
+.Ic \&PP
+macro, an
+.Xr eqn 7
+.Ic \&EQ
+or
+.Ic \&EN
+macro, or a
+.Xr roff 7
+.Sq \&..
+block closing request is invoked with at least one argument.
+All arguments are ignored.
+.It Sy "skipping excess arguments"
+.Pq mdoc , roff
The
+.Ic \&Bf
+macro is invoked with more than one argument, or a request of the
+.Ic \&de
+family is invoked with more than two arguments.
+The excess arguments are ignored.
+.El
+.Ss FATAL errors
+.Bl -ohang
+.It Sy "input too large"
+.Pq mdoc , man
+Currently,
+.Nm
+cannot handle input files larger than its arbitrary size limit
+of 2^31 bytes (2 Gigabytes).
+Since useful manuals are always small, this is not a problem in practice.
+Parsing is aborted as soon as the condition is detected.
+.It Sy "NOT IMPLEMENTED: .so with absolute path or \(dq..\(dq"
+.Pq roff
+For security reasons,
.Nm
-utility may also print messages related to invalid command line arguments
-or operating system errors, for example when memory is exhausted or
-input files cannot be read.
-Such messages do not carry the prefix described above.
+allows
+.Ic \&so
+file inclusion requests only with relative paths
+and only without ascending to any parent directory.
+By requesting the inclusion of a sensitive file, a malicious document
+might otherwise trick a privileged user into inadvertently displaying
+the file on the screen, revealing the file content to bystanders.
+The parser exits immediately.
+.It Sy ".so request failed"
+.Pq roff
+Servicing a
+.Ic \&so
+request requires reading an external file.
+While trying to do so, an
+.Xr open 2 ,
+.Xr stat 2 ,
+or
+.Xr read 2
+system call failed.
+The parser exits immediately.
+Before showing this message,
+.Nm
+always shows another message explaining why the system call failed.
+.El
.Sh COMPATIBILITY
This section summarises
.Nm
.It
Words aren't hyphenated.
.El
-.Ss HTML/XHTML Compatibility
+.Ss HTML Compatibility
.Bl -bullet -compact
.It
The
The
.Nm
utility was written by
-.An Kristaps Dzonsons ,
-.Mt kristaps@bsd.lv .
+.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv .
.Sh CAVEATS
In
.Fl T Ns Cm html
git.ckatri.com / mandoc.git / blobdiff