look at COHERENT troff

[mandoc.git] / roff.7

diff --git a/roff.7 b/roff.7
index 06a94cc31643bd6cd9041e53ed314ddff0bea448..dc39b69bb56b3b3bf29d9a8dee0f1648152947b8 100644 (file)
--- a/roff.7
+++ b/roff.7
@@ -1,7 +1,7 @@
-.\"    $Id: roff.7,v 1.20 2011/01/03 16:04:41 kristaps Exp $
+.\"    $Id: roff.7,v 1.70 2015/02/17 17:16:52 schwarze Exp $

 .\"
 .\"

-.\" Copyright (c) 2010 Kristaps Dzonsons <kristaps@bsd.lv>
-.\" Copyright (c) 2010 Ingo Schwarze <schwarze@openbsd.org>
+.\" Copyright (c) 2010, 2011, 2012 Kristaps Dzonsons <kristaps@bsd.lv>
+.\" Copyright (c) 2010, 2011, 2013, 2014 Ingo Schwarze <schwarze@openbsd.org>

 .\"
 .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above
 .\"
 .\" Permission to use, copy, modify, and distribute this software for any
 .\" purpose with or without fee is hereby granted, provided that the above


@@ -15,7 +15,7 @@
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"

-.Dd $Mdocdate: January 3 2011 $
+.Dd $Mdocdate: February 17 2015 $

 .Dt ROFF 7
 .Os
 .Sh NAME
 .Dt ROFF 7
 .Os
 .Sh NAME


@@ -25,42 +25,291 @@
 The
 .Nm roff
 language is a general purpose text formatting language.
 The
 .Nm roff
 language is a general purpose text formatting language.

-In particular, it serves as the basis for the
+Since traditional implementations of the

 .Xr mdoc 7
 and
 .Xr man 7
 .Xr mdoc 7
 and
 .Xr man 7

-manual formatting macro languages.
-This manual describes the subset of the
+manual formatting languages are based on it,
+many real-world manuals use small numbers of

 .Nm
 .Nm

-language accepted by the
+requests and escape sequences intermixed with their
+.Xr mdoc 7
+or
+.Xr man 7
+code.
+To properly format such manuals, the
+.Xr mandoc 1
+utility supports a tiny subset of
+.Nm
+requests and escapes.
+Only these requests and escapes supported by

 .Xr mandoc 1
 .Xr mandoc 1

-utility.
+are documented in the present manual,
+together with the basic language syntax shared by
+.Nm ,
+.Xr mdoc 7 ,
+and
+.Xr man 7 .
+For complete
+.Nm
+manuals, consult the
+.Sx SEE ALSO
+section.

 .Pp
 .Pp

-Input lines beginning with the control characters
+Input lines beginning with the control character

 .Sq \&.
 .Sq \&.

-or
-.Sq \(aq

 are parsed for requests and macros.
 are parsed for requests and macros.

-These define the document structure, change the processing state
-and manipulate the formatting.
-Some requests and macros also produce formatted output,
-while others do not.
-.Pp
-All other input lines provide free-form text to be printed;
-the formatting of free-form text depends on the respective
-processing context.
+Such lines are called
+.Dq request lines
+or
+.Dq macro lines ,
+respectively.
+Requests change the processing state and manipulate the formatting;
+some macros also define the document structure and produce formatted
+output.
+The single quote
+.Pq Qq \(aq
+is accepted as an alternative control character,
+treated by
+.Xr mandoc 1
+just like
+.Ql \&.
+.Pp
+Lines not beginning with control characters are called
+.Dq text lines .
+They provide free-form text to be printed; the formatting of the text
+depends on the respective processing context.

 .Sh LANGUAGE SYNTAX
 .Nm
 documents may contain only graphable 7-bit ASCII characters, the space
 character, and, in certain circumstances, the tab character.
 .Sh LANGUAGE SYNTAX
 .Nm
 documents may contain only graphable 7-bit ASCII characters, the space
 character, and, in certain circumstances, the tab character.

-To produce other characters in the output, use the escape sequences
-documented in the
+The backslash character
+.Sq \e
+indicates the start of an escape sequence, used for example for
+.Sx Comments ,
+.Sx Special Characters ,
+.Sx Predefined Strings ,
+and
+user-defined strings defined using the
+.Sx ds
+request.
+For a listing of escape sequences, consult the
+.Sx ESCAPE SEQUENCE REFERENCE
+below.
+.Ss Comments
+Text following an escaped double-quote
+.Sq \e\(dq ,
+whether in a request, macro, or text line, is ignored to the end of the line.
+A request line beginning with a control character and comment escape
+.Sq \&.\e\(dq
+is also ignored.
+Furthermore, request lines with only a control character and optional
+trailing whitespace are stripped from input.
+.Pp
+Examples:
+.Bd -literal -offset indent -compact
+\&.\e\(dq This is a comment line.
+\&.\e\(dq The next line is ignored:
+\&.
+\&.Sh EXAMPLES \e\(dq This is a comment, too.
+\&example text \e\(dq And so is this.
+.Ed
+.Ss Special Characters
+Special characters are used to encode special glyphs and are rendered
+differently across output media.
+They may occur in request, macro, and text lines.
+Sequences begin with the escape character
+.Sq \e
+followed by either an open-parenthesis
+.Sq \&(
+for two-character sequences; an open-bracket
+.Sq \&[
+for n-character sequences (terminated at a close-bracket
+.Sq \&] ) ;
+or a single one character sequence.
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li \e(em
+Two-letter em dash escape.
+.It Li \ee
+One-letter backslash escape.
+.El
+.Pp
+See

 .Xr mandoc_char 7
 .Xr mandoc_char 7

-manual.
+for a complete list.
+.Ss Text Decoration
+Terms may be text-decorated using the
+.Sq \ef
+escape followed by an indicator: B (bold), I (italic), R (regular), or P
+(revert to previous mode).
+A numerical representation 3, 2, or 1 (bold, italic, and regular,
+respectively) may be used instead.
+The indicator or numerical representative may be preceded by C
+(constant-width), which is ignored.
+.Pp
+The two-character indicator
+.Sq BI
+requests a font that is both bold and italic.
+It may not be portable to old roff implementations.
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li \efBbold\efR
+Write in \fBbold\fP, then switch to regular font mode.
+.It Li \efIitalic\efP
+Write in \fIitalic\fP, then return to previous font mode.
+.It Li \ef(BIbold italic\efP
+Write in \f(BIbold italic\fP, then return to previous font mode.
+.El
+.Pp
+Text decoration is
+.Em not
+recommended for
+.Xr mdoc 7 ,
+which encourages semantic annotation.
+.Ss Predefined Strings
+Predefined strings, like
+.Sx Special Characters ,
+mark special output glyphs.
+Predefined strings are escaped with the slash-asterisk,
+.Sq \e* :
+single-character
+.Sq \e*X ,
+two-character
+.Sq \e*(XX ,
+and N-character
+.Sq \e*[N] .
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li \e*(Am
+Two-letter ampersand predefined string.
+.It Li \e*q
+One-letter double-quote predefined string.
+.El
+.Pp
+Predefined strings are not recommended for use,
+as they differ across implementations.
+Those supported by
+.Xr mandoc 1
+are listed in
+.Xr mandoc_char 7 .
+Manuals using these predefined strings are almost certainly not portable.
+.Ss Whitespace
+Whitespace consists of the space character.
+In text lines, whitespace is preserved within a line.
+In request and macro lines, whitespace delimits arguments and is discarded.
+.Pp
+Unescaped trailing spaces are stripped from text line input unless in a
+literal context.
+In general, trailing whitespace on any input line is discouraged for
+reasons of portability.
+In the rare case that a blank character is needed at the end of an
+input line, it may be forced by
+.Sq \e\ \e& .
+.Pp
+Literal space characters can be produced in the output
+using escape sequences.
+In macro lines, they can also be included in arguments using quotation; see
+.Sx MACRO SYNTAX
+for details.
+.Pp
+Blank text lines, which may include whitespace, are only permitted
+within literal contexts.
+If the first character of a text line is a space, that line is printed
+with a leading newline.
+.Ss Scaling Widths
+Many requests and macros support scaled widths for their arguments.
+The syntax for a scaled width is
+.Sq Li [+-]?[0-9]*.[0-9]*[:unit:] ,
+where a decimal must be preceded or followed by at least one digit.
+Negative numbers, while accepted, are truncated to zero.
+.Pp
+The following scaling units are accepted:

 .Pp
 .Pp

-All manuals must have
-.Ux
-line terminators.
+.Bl -tag -width Ds -offset indent -compact
+.It c
+centimetre
+.It i
+inch
+.It P
+pica (~1/6 inch)
+.It p
+point (~1/72 inch)
+.It f
+scale
+.Sq u
+by 65536
+.It v
+default vertical span
+.It m
+width of rendered
+.Sq m
+.Pq em
+character
+.It n
+width of rendered
+.Sq n
+.Pq en
+character
+.It u
+default horizontal span for the terminal
+.It M
+mini-em (~1/100 em)
+.El
+.Pp
+Using anything other than
+.Sq m ,
+.Sq n ,
+or
+.Sq v
+is necessarily non-portable across output media.
+See
+.Sx COMPATIBILITY .
+.Pp
+If a scaling unit is not provided, the numerical value is interpreted
+under the default rules of
+.Sq v
+for vertical spaces and
+.Sq u
+for horizontal ones.
+.Pp
+Examples:
+.Bl -tag -width ".Bl -tag -width 2i" -offset indent -compact
+.It Li \&.Bl -tag -width 2i
+two-inch tagged list indentation in
+.Xr mdoc 7
+.It Li \&.HP 2i
+two-inch tagged list indentation in
+.Xr man 7
+.It Li \&.sp 2v
+two vertical spaces
+.El
+.Ss Sentence Spacing
+Each sentence should terminate at the end of an input line.
+By doing this, a formatter will be able to apply the proper amount of
+spacing after the end of sentence (unescaped) period, exclamation mark,
+or question mark followed by zero or more non-sentence closing
+delimiters
+.Po
+.Sq \&) ,
+.Sq \&] ,
+.Sq \&' ,
+.Sq \&"
+.Pc .
+.Pp
+The proper spacing is also intelligently preserved if a sentence ends at
+the boundary of a macro line.
+.Pp
+Examples:
+.Bd -literal -offset indent -compact
+Do not end sentences mid-line like this.  Instead,
+end a sentence like this.
+A macro would end like this:
+\&.Xr mandoc 1 \&.
+.Ed

 .Sh REQUEST SYNTAX
 A request or macro line consists of:
 .Pp
 .Sh REQUEST SYNTAX
 A request or macro line consists of:
 .Pp


@@ -86,43 +335,259 @@ Thus, the following request lines are all equivalent:
 \&.ig    end
 \&.   ig end
 .Ed
 \&.ig    end
 \&.   ig end
 .Ed

+.Sh MACRO SYNTAX
+Macros are provided by the
+.Xr mdoc 7
+and
+.Xr man 7
+languages and can be defined by the
+.Sx \&de
+request.
+When called, they follow the same syntax as requests, except that
+macro arguments may optionally be quoted by enclosing them
+in double quote characters
+.Pq Sq \(dq .
+Quoted text, even if it contains whitespace or would cause
+a macro invocation when unquoted, is always considered literal text.
+Inside quoted text, pairs of double quote characters
+.Pq Sq Qq
+resolve to single double quote characters.
+.Pp
+To be recognised as the beginning of a quoted argument, the opening
+quote character must be preceded by a space character.
+A quoted argument extends to the next double quote character that is not
+part of a pair, or to the end of the input line, whichever comes earlier.
+Leaving out the terminating double quote character at the end of the line
+is discouraged.
+For clarity, if more arguments follow on the same input line,
+it is recommended to follow the terminating double quote character
+by a space character; in case the next character after the terminating
+double quote character is anything else, it is regarded as the beginning
+of the next, unquoted argument.
+.Pp
+Both in quoted and unquoted arguments, pairs of backslashes
+.Pq Sq \e\e
+resolve to single backslashes.
+In unquoted arguments, space characters can alternatively be included
+by preceding them with a backslash
+.Pq Sq \e\~ ,
+but quoting is usually better for clarity.
+.Pp
+Examples:
+.Bl -tag -width Ds -offset indent -compact
+.It Li .Fn strlen \(dqconst char *s\(dq
+Group arguments
+.Qq const char *s
+into one function argument.
+If unspecified,
+.Qq const ,
+.Qq char ,
+and
+.Qq *s
+would be considered separate arguments.
+.It Li .Op \(dqFl a\(dq
+Consider
+.Qq \&Fl a
+as literal text instead of a flag macro.
+.El

 .Sh REQUEST REFERENCE
 The
 .Xr mandoc 1
 .Nm
 .Sh REQUEST REFERENCE
 The
 .Xr mandoc 1
 .Nm

-parser recognizes the following requests.
-Note that the
-.Nm
-language defines many more requests not implemented in
-.Xr mandoc 1 .
+parser recognises the following requests.
+For requests marked as "ignored" or "unsupported", any arguments are
+ignored, and the number of arguments is not checked.
+.Ss \&ab
+Abort processing.
+Currently unsupported.

 .Ss \&ad
 Set line adjustment mode.
 .Ss \&ad
 Set line adjustment mode.

-This line-scoped request is intended to have one argument to select
-normal, left, right, or center adjustment for subsequent text.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
+It takes one argument to select normal, left, right,
+or center adjustment for subsequent text.
+Currently ignored.
+.Ss \&af
+Assign an output format to a number register.
+Currently ignored.
+.Ss \&aln
+Create an alias for a number register.
+Currently unsupported.
+.Ss \&als
+Create an alias for a request, string, macro, or diversion.
+Currently unsupported.

 .Ss \&am
 Append to a macro definition.
 The syntax of this request is the same as that of
 .Sx \&de .
 .Ss \&am
 Append to a macro definition.
 The syntax of this request is the same as that of
 .Sx \&de .

-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&ami
-Append to a macro definition, specifying the macro name indirectly.
-The syntax of this request is the same as that of
-.Sx \&dei .
-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.

 .Ss \&am1
 Append to a macro definition, switching roff compatibility mode off
 .Ss \&am1
 Append to a macro definition, switching roff compatibility mode off

-during macro execution.
+during macro execution (groff extension).

 The syntax of this request is the same as that of
 .Sx \&de1 .
 The syntax of this request is the same as that of
 .Sx \&de1 .

-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&am .
+.Ss \&ami
+Append to a macro definition, specifying the macro name indirectly
+(groff extension).
+The syntax of this request is the same as that of
+.Sx \&dei .
+.Ss \&ami1
+Append to a macro definition, specifying the macro name indirectly
+and switching roff compatibility mode off during macro execution
+(groff extension).
+The syntax of this request is the same as that of
+.Sx \&dei1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&ami .
+.Ss \&as
+Append to a user-defined string.
+The syntax of this request is the same as that of
+.Sx \&ds .
+If a user-defined string with the specified name does not yet exist,
+it is set to the empty string before appending.
+.Ss \&as1
+Append to a user-defined string, switching roff compatibility mode off
+during macro execution (groff extension).
+The syntax of this request is the same as that of
+.Sx \&ds1 .
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&as .
+.Ss \&asciify
+Fully unformat a diversion.
+Currently unsupported.
+.Ss \&backtrace
+Print a backtrace of the input stack.
+This is a groff extension and currently ignored.
+.Ss \&bd
+Artificially embolden by repeated printing with small shifts.
+Currently ignored.
+.Ss \&bleedat
+Set the BleedBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.Ss \&blm
+Set a blank line trap.
+Currently unsupported.
+.Ss \&box
+Begin a diversion without including a partially filled line.
+Currently unsupported.
+.Ss \&boxa
+Add to a diversion without including a partially filled line.
+Currently unsupported.
+.Ss \&bp
+Begin new page.
+Currently ignored.
+.Ss \&BP
+Define a frame and place a picture in it.
+This is a Heirloom extension and currently unsupported.
+.Ss \&br
+Break the output line.
+See
+.Xr man 7
+and
+.Xr mdoc 7 .
+.Ss \&break
+Break out of a
+.Sx \&while
+loop.
+Currently unsupported.
+.Ss \&breakchar
+Optional line break characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&brnl
+Break output line after next N input lines.
+This is a Heirloom extension and currently ignored.
+.Ss \&brp
+Break and spread output line.
+Currently, this is implemented as an alias for
+.Sx \&br .
+.Ss \&brpnl
+Break and spread output line after next N input lines.
+This is a Heirloom extension and currently ignored.
+.Ss \&c2
+Change the no-break control character.
+Currently unsupported.
+.Ss \&cc
+Change the control character.
+Its syntax is as follows:
+.Bd -literal -offset indent
+.Pf . Cm \&cc Op Ar c
+.Ed
+.Pp
+If
+.Ar c
+is not specified, the control character is reset to
+.Sq \&. .
+Trailing characters are ignored.
+.Ss \&ce
+Center some lines.
+It takes one integer argument, specifying how many lines to center.
+Currently ignored.
+.Ss \&cf
+Output the contents of a file.
+Ignored because insecure.
+.Ss \&cflags
+Set character flags.
+This is a groff extension and currently ignored.
+.Ss \&ch
+Change a trap location.
+Currently ignored.
+.Ss \&char
+Define a new glyph.
+Currently unsupported.
+.Ss \&chop
+Remove the last character from a macro, string, or diversion.
+Currently unsupported.
+.Ss \&class
+Define a character class.
+This is a groff extension and currently ignored.
+.Ss \&close
+Close an open file.
+Ignored because insecure.
+.Ss \&CL
+Print text in color.
+This is a Heirloom extension and currently unsupported.
+.Ss \&color
+Activate or deactivate colors.
+This is a groff extension and currently ignored.
+.Ss \&composite
+Define a name component for composite glyph names.
+This is a groff extension and currently unsupported.
+.Ss \&continue
+Immediately start the next iteration of a
+.Sx \&while
+loop.
+Currently unsupported.
+.Ss \&cp
+Switch
+.Nm
+compatibility mode on or off.
+Currently ignored.
+.Ss \&cropat
+Set the CropBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.Ss \&cs
+Constant character spacing mode.
+Currently ignored.
+.Ss \&cu
+Underline including whitespace.
+Currently ignored.
+.Ss \&da
+Append to a diversion.
+Currently unsupported.
+.Ss \&dch
+Change a trap location in the current diversion.
+This is a Heirloom extension and currently unsupported.

 .Ss \&de
 Define a
 .Nm
 .Ss \&de
 Define a
 .Nm


@@ -174,12 +639,9 @@ The macro can be invoked later using the syntax
 .Pp
 .D1 Pf . Ar name Op Ar argument Op Ar argument ...
 .Pp
 .Pp
 .D1 Pf . Ar name Op Ar argument Op Ar argument ...
 .Pp

-Arguments are separated by blank characters and can be quoted
-using double-quotes
-.Pq Sq \(dq
-to allow inclusion of blank characters into arguments.
-To include the double-quote character into a quoted argument,
-escape it from ending the argument by doubling it.
+Regarding argument parsing, see
+.Sx MACRO SYNTAX
+above.

 .Pp
 The line invoking the macro will be replaced
 in the input stream by the
 .Pp
 The line invoking the macro will be replaced
 in the input stream by the


@@ -221,32 +683,66 @@ one explicit newline character.
 In order to prevent endless recursion, both groff and
 .Xr mandoc 1
 limit the stack depth for expanding macros and strings
 In order to prevent endless recursion, both groff and
 .Xr mandoc 1
 limit the stack depth for expanding macros and strings

-to a large, but finite number.
-Do not rely on the exact value of this limit.
+to a large, but finite number, and
+.Xr mandoc 1
+also limits the length of the expanded input line.
+Do not rely on the exact values of these limits.
+.Ss \&de1
+Define a
+.Nm
+macro that will be executed with
+.Nm
+compatibility mode switched off during macro execution.
+This is a groff extension.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&de .
+.Ss \&defcolor
+Define a color name.
+This is a groff extension and currently ignored.

 .Ss \&dei
 Define a
 .Nm
 .Ss \&dei
 Define a
 .Nm

-macro, specifying the macro name indirectly.
+macro, specifying the macro name indirectly (groff extension).

 The syntax of this request is the same as that of
 .Sx \&de .
 The syntax of this request is the same as that of
 .Sx \&de .

-It is currently ignored by
-.Xr mandoc 1 ,
-as are its children.
-.Ss \&de1
+The request
+.Pp
+.D1 Pf . Cm \&dei Ar name Op Ar end
+.Pp
+has the same effect as:
+.Pp
+.D1 Pf . Cm \&de No \e* Ns Bo Ar name Bc Op \e* Ns Bq Ar end
+.Ss \&dei1

 Define a
 .Nm
 macro that will be executed with
 .Nm
 Define a
 .Nm
 macro that will be executed with
 .Nm

-compatibility mode switched off during macro execution.
-This is a GNU extension not available in traditional
-.Nm
-implementations and not even in older versions of groff.
+compatibility mode switched off during macro execution,
+specifying the macro name indirectly (groff extension).

 Since
 .Xr mandoc 1
 does not implement
 .Nm
 compatibility mode at all, it handles this request as an alias for
 Since
 .Xr mandoc 1
 does not implement
 .Nm
 compatibility mode at all, it handles this request as an alias for

-.Sx \&de .
+.Sx \&dei .
+.Ss \&device
+This request only makes sense with the groff-specific intermediate
+output format and is unsupported.
+.Ss \&devicem
+This request only makes sense with the groff-specific intermediate
+output format and is unsupported.
+.Ss \&di
+Begin a diversion.
+Currently unsupported.
+.Ss \&do
+Execute
+.Nm
+request or macro line with compatibility mode disabled.
+Currently unsupported.

 .Ss \&ds
 Define a user-defined string.
 Its syntax is as follows:
 .Ss \&ds
 Define a user-defined string.
 Its syntax is as follows:


@@ -305,6 +801,32 @@ macro when used in a
 .Xr man 7
 document.
 Such abuse is of course strongly discouraged.
 .Xr man 7
 document.
 Such abuse is of course strongly discouraged.

+.Ss \&ds1
+Define a user-defined string that will be expanded with
+.Nm
+compatibility mode switched off during string expansion.
+This is a groff extension.
+Since
+.Xr mandoc 1
+does not implement
+.Nm
+compatibility mode at all, it handles this request as an alias for
+.Sx \&ds .
+.Ss \&dwh
+Set a location trap in the current diversion.
+This is a Heirloom extension and currently unsupported.
+.Ss \&dt
+Set a trap within a diversion.
+Currently unsupported.
+.Ss \&ec
+Change the escape character.
+Currently unsupported.
+.Ss \&ecs
+Restore the escape character.
+Currently unsupported.
+.Ss \&ecr
+Save the escape character.
+Currently unsupported.

 .Ss \&el
 The
 .Qq else
 .Ss \&el
 The
 .Qq else


@@ -319,9 +841,171 @@ then false is assumed.
 The syntax of this request is similar to
 .Sx \&if
 except that the conditional is missing.
 The syntax of this request is similar to
 .Sx \&if
 except that the conditional is missing.

+.Ss \&em
+Set a trap at the end of input.
+Currently unsupported.
+.Ss \&EN
+End an equation block.
+See
+.Sx \&EQ .
+.Ss \&eo
+Disable the escape mechanism completely.
+Currently unsupported.
+.Ss \&EP
+End a picture started by
+.Sx \&BP .
+This is a Heirloom extension and currently unsupported.
+.Ss \&EQ
+Begin an equation block.
+See
+.Xr eqn 7
+for a description of the equation language.
+.Ss \&errprint
+Print a string like an error message.
+This is a Heirloom extension and currently ignored.
+.Ss \&ev
+Switch to another environment.
+Currently unsupported.
+.Ss \&evc
+Copy an environment into the current environment.
+Currently unsupported.
+.Ss \&ex
+Abort processing and exit.
+Currently unsupported.
+.Ss \&fallback
+Select the fallback sequence for a font.
+This is a Heirloom extension and currently ignored.
+.Ss \&fam
+Change the font family.
+Takes one argument specifying the font family to be selected.
+It is a groff extension and currently ignored.
+.Ss \&fc
+Define a delimiting and a padding character for fields.
+Currently unsupported.
+.Ss \&fchar
+Define a fallback glyph.
+Currently unsupported.
+.Ss \&fcolor
+Set the fill color for \eD objects.
+This is a groff extension and currently ignored.
+.Ss \&fdeferlig
+Defer ligature building.
+This is a Heirloom extension and currently ignored.
+.Ss \&feature
+Enable or disable an OpenType feature.
+This is a Heirloom extension and currently ignored.
+.Ss \&fi
+Switch to fill mode.
+See
+.Xr man 7 .
+Ignored in
+.Xr mdoc 7 .
+.Ss \&fkern
+Control the use of kerning tables for a font.
+This is a Heirloom extension and currently ignored.
+.Ss \&fl
+Flush output.
+Currently ignored.
+.Ss \&flig
+Define ligatures.
+This is a Heirloom extension and currently ignored.
+.Ss \&fp
+Assign font position.
+Currently ignored.
+.Ss \&fps
+Mount a font with a special character map.
+This is a Heirloom extension and currently ignored.
+.Ss \&fschar
+Define a font-specific fallback glyph.
+This is a groff extension and currently unsupported.
+.Ss \&fspacewidth
+Set a font-specific width for the space character.
+This is a Heirloom extension and currently ignored.
+.Ss \&fspecial
+Conditionally define a special font.
+This is a groff extension and currently ignored.
+.Ss \&ft
+Change the font.
+Its syntax is as follows:
+.Pp
+.D1 Pf . Cm \&ft Op Ar font
+.Pp
+The following
+.Ar font
+arguments are supported:
+.Bl -tag -width 4n -offset indent
+.It Cm B , BI , 3 , 4
+switches to
+.Sy bold
+font
+.It Cm I , 2
+switches to
+.Em underlined
+font
+.It Cm R , CW , 1
+switches to normal font
+.It Cm P No "or no argument"
+switches back to the previous font
+.El
+.Pp
+This request takes effect only locally, may be overridden by macros
+and escape sequences, and is only supported in
+.Xr man 7
+for now.
+.Ss \&ftr
+Translate font name.
+This is a groff extension and currently ignored.
+.Ss \&fzoom
+Zoom font size.
+Currently ignored.
+.Ss \&gcolor
+Set glyph color.
+This is a groff extension and currently ignored.
+.Ss \&hc
+Set the hyphenation character.
+Currently ignored.
+.Ss \&hcode
+Set hyphenation codes of characters.
+Currently ignored.
+.Ss \&hidechar
+Hide characters in a font.
+This is a Heirloom extension and currently ignored.
+.Ss \&hla
+Set hyphenation language.
+This is a groff extension and currently ignored.
+.Ss \&hlm
+Set maximum number of consecutive hyphenated lines.
+Currently ignored.
+.Ss \&hpf
+Load hyphenation pattern file.
+This is a groff extension and currently ignored.
+.Ss \&hpfa
+Load hyphenation pattern file, appending to the current patterns.
+This is a groff extension and currently ignored.
+.Ss \&hpfcode
+Define mapping values for character codes in hyphenation patterns.
+This is a groff extension and currently ignored.
+.Ss \&hw
+Specify hyphenation points in words.
+Currently ignored.

 .Ss \&hy
 Set automatic hyphenation mode.
 .Ss \&hy
 Set automatic hyphenation mode.

-This line-scoped request is currently ignored.
+Currently ignored.
+.Ss \&hylang
+Set hyphenation language.
+This is a Heirloom extension and currently ignored.
+.Ss \&hylen
+Minimum word length for hyphenation.
+This is a Heirloom extension and currently ignored.
+.Ss \&hym
+Set hyphenation margin.
+This is a groff extension and currently ignored.
+.Ss \&hypp
+Define hyphenation penalties.
+This is a Heirloom extension and currently ignored.
+.Ss \&hys
+Set hyphenation space.
+This is a groff extension and currently ignored.

 .Ss \&ie
 The
 .Qq if
 .Ss \&ie
 The
 .Qq if


@@ -334,10 +1018,69 @@ Its syntax is equivalent to
 .Sx \&if .
 .Ss \&if
 Begins a conditional.
 .Sx \&if .
 .Ss \&if
 Begins a conditional.

-Right now, the conditional evaluates to true
-if and only if it starts with the letter
-.Sy n ,
-indicating processing in nroff style as opposed to troff style.
+This request has the following syntax:
+.Bd -literal -offset indent
+\&.if COND BODY
+.Ed
+.Bd -literal -offset indent
+\&.if COND \e{BODY
+BODY...\e}
+.Ed
+.Bd -literal -offset indent
+\&.if COND \e{\e
+BODY...
+\&.\e}
+.Ed
+.Pp
+COND is a conditional statement.
+Currently,
+.Xr mandoc 1
+supports the following subset of roff conditionals:
+.Bl -bullet
+.It
+If
+.Sq \&!
+is prefixed to COND, the condition is logically inverted.
+.It
+If the first character of COND is
+.Sq n
+.Pq nroff mode
+or
+.Sq o
+.Pq odd page ,
+COND evaluates to true.
+.It
+If the first character of COND is
+.Sq c
+.Pq character available ,
+.Sq d
+.Pq string defined ,
+.Sq e
+.Pq even page ,
+.Sq r
+.Pq register accessed ,
+.Sq t
+.Pq troff mode ,
+or
+.Sq v
+.Pq vroff mode ,
+COND evaluates to false.
+.It
+If COND starts with a parenthesis or with an optionally signed
+integer number, it is evaluated according to the rules of
+.Sx Numerical expressions
+explained below.
+It evaluates to true if the result is positive,
+or to false if the result is zero or negative.
+.It
+Otherwise, the first character of COND is regarded as a delimiter
+and COND evaluates to true if the string extending from its first
+to its second occurrence is equal to the string extending from its
+second to its third occurrence.
+.It
+If COND cannot be parsed, it evaluates to false.
+.El
+.Pp

 If a conditional is false, its children are not processed, but are
 syntactically interpreted to preserve the integrity of the input
 document.
 If a conditional is false, its children are not processed, but are
 syntactically interpreted to preserve the integrity of the input
 document.


@@ -355,44 +1098,12 @@ will continue to syntactically interpret to the block close of the final
 conditional.
 Sub-conditionals, in this case, obviously inherit the truth value of
 the parent.
 conditional.
 Sub-conditionals, in this case, obviously inherit the truth value of
 the parent.

-This request has the following syntax:
-.Bd -literal -offset indent
-\&.if COND \e{\e
-BODY...
-\&.\e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e{ BODY
-BODY... \e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e{ BODY
-BODY...
-\&.\e}
-.Ed
-.Bd -literal -offset indent
-\&.if COND \e
-BODY
-.Ed
-.Pp
-COND is a conditional statement.
-roff allows for complicated conditionals; mandoc is much simpler.
-At this time, mandoc supports only
-.Sq n ,
-evaluating to true;
-and
-.Sq t ,
-.Sq e ,
-and
-.Sq o ,
-evaluating to false.
-All other invocations are read up to the next end of line or space and
-evaluate as false.

 .Pp
 If the BODY section is begun by an escaped brace
 .Sq \e{ ,
 .Pp
 If the BODY section is begun by an escaped brace
 .Sq \e{ ,

-scope continues until a closing-brace escape sequence
-.Sq \.\e} .
+scope continues until the end of the input line containing the
+matching closing-brace escape sequence
+.Sq \e} .

 If the BODY is not enclosed in braces, scope continues until
 the end of the line.
 If the COND is followed by a BODY on the same line, whether after a
 If the BODY is not enclosed in braces, scope continues until
 the end of the line.
 If the COND is followed by a BODY on the same line, whether after a


@@ -414,15 +1125,20 @@ than having the request or macro follow as
 The scope of a conditional is always parsed, but only executed if the
 conditional evaluates to true.
 .Pp
 The scope of a conditional is always parsed, but only executed if the
 conditional evaluates to true.
 .Pp

-Note that text following an
-.Sq \&.\e}
-escape sequence is discarded.
-Furthermore, if an explicit closing sequence
+Note that the

 .Sq \e}
 .Sq \e}

-is specified in a free-form line, the entire line is accepted within the
-scope of the prior request, not only the text preceding the close, with the
+is converted into a zero-width escape sequence if not passed as a
+standalone macro
+.Sq \&.\e} .
+For example,
+.Pp
+.D1 \&.Fl a \e} b
+.Pp
+will result in

 .Sq \e}
 .Sq \e}

-collapsing into a zero-width space.
+being considered an argument of the
+.Sq \&Fl
+macro.

 .Ss \&ig
 Ignore input.
 Its syntax can be either
 .Ss \&ig
 Ignore input.
 Its syntax can be either


@@ -467,33 +1183,181 @@ Otherwise, it only terminates the
 and arguments following it or the
 .Sq \&..
 request are discarded.
 and arguments following it or the
 .Sq \&..
 request are discarded.

+.Ss \&in
+Change indentation.
+See
+.Xr man 7 .
+Ignored in
+.Xr mdoc 7 .
+.Ss \&index
+Find a substring in a string.
+This is a Heirloom extension and currently unsupported.
+.Ss \&it
+Set an input line trap.
+Its syntax is as follows:
+.Pp
+.D1 Pf . Cm it Ar expression macro
+.Pp
+The named
+.Ar macro
+will be invoked after processing the number of input text lines
+specified by the numerical
+.Ar expression .
+While evaluating the
+.Ar expression ,
+the unit suffixes described below
+.Sx Scaling Widths
+are ignored.
+.Ss \&itc
+Set an input line trap, not counting lines ending with \ec.
+Currently unsupported.
+.Ss \&IX
+To support the generation of a table of contents,
+.Xr pod2man 1
+emits this user-defined macro, usually without defining it.
+To avoid reporting large numbers of spurious errors,
+.Xr mandoc 1
+ignores it.
+.Ss \&kern
+Switch kerning on or off.
+Currently ignored.
+.Ss \&kernafter
+Increase kerning after some characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&kernbefore
+Increase kerning before some characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&kernpair
+Add a kerning pair to the kerning table.
+This is a Heirloom extension and currently ignored.
+.Ss \&lc
+Define a leader repetition character.
+Currently unsupported.
+.Ss \&lc_ctype
+Set the
+.Dv LC_CTYPE
+locale.
+This is a Heirloom extension and currently unsupported.
+.Ss \&lds
+Define a local string.
+This is a Heirloom extension and currently unsupported.
+.Ss \&length
+Count the number of input characters in a user-defined string.
+Currently unsupported.
+.Ss \&letadj
+Dynamic letter spacing and reshaping.
+This is a Heirloom extension and currently ignored.
+.Ss \&lf
+Change the line number for error messages.
+Ignored because insecure.
+.Ss \&lg
+Switch the ligature mechanism on or off.
+Currently ignored.
+.Ss \&lhang
+Hang characters at left margin.
+This is a Heirloom extension and currently ignored.
+.Ss \&linetabs
+Enable or disable line-tabs mode.
+This is a groff extension and currently unsupported.
+.Ss \&ll
+Change the output line length.
+Its syntax is as follows:
+.Pp
+.D1 Pf . Cm \&ll Op Oo +|- Oc Ns Ar width
+.Pp
+If the
+.Ar width
+argument is omitted, the line length is reset to its previous value.
+The default setting for terminal output is 78n.
+If a sign is given, the line length is added to or subtracted from;
+otherwise, it is set to the provided value.
+Using this request in new manuals is discouraged for several reasons,
+among others because it overrides the
+.Xr mandoc 1
+.Fl O Cm width
+command line option.
+.Ss \&lnr
+Set local number register.
+This is a Heirloom extension and currently unsupported.
+.Ss \&lnrf
+Set local floating-point register.
+This is a Heirloom extension and currently unsupported.
+.Ss \&lpfx
+Set a line prefix.
+This is a Heirloom extension and currently unsupported.
+.Ss \&ls
+Set line spacing.
+It takes one integer argument specifying the vertical distance of
+subsequent output text lines measured in v units.
+Currently ignored.
+.Ss \&lsm
+Set a leading spaces trap.
+This is a groff extension and currently unsupported.
+.Ss \&lt
+Set title line length.
+Currently ignored.
+.Ss \&mc
+Print margin character in the right margin.
+Currently ignored.
+.Ss \&mediasize
+Set the device media size.
+This is a Heirloom extension and currently ignored.
+.Ss \&minss
+Set minimum word space.
+This is a Heirloom extension and currently ignored.
+.Ss \&mk
+Mark vertical position.
+Currently ignored.
+.Ss \&mso
+Load a macro file.
+Ignored because insecure.
+.Ss \&na
+Disable adjusting without changing the adjustment mode.
+Currently ignored.

 .Ss \&ne
 Declare the need for the specified minimum vertical space
 before the next trap or the bottom of the page.
 .Ss \&ne
 Declare the need for the specified minimum vertical space
 before the next trap or the bottom of the page.

-This line-scoped request is currently ignored.
+Currently ignored.
+.Ss \&nf
+Switch to no-fill mode.
+See
+.Xr man 7 .
+Ignored by
+.Xr mdoc 7 .

 .Ss \&nh
 Turn off automatic hyphenation mode.
 .Ss \&nh
 Turn off automatic hyphenation mode.

-This line-scoped request is currently ignored.
-.Ss \&rm
-Remove a request, macro or string.
-This request is intended to have one argument,
-the name of the request, macro or string to be undefined.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
+Currently ignored.
+.Ss \&nhychar
+Define hyphenation-inhibiting characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&nm
+Print line numbers.
+Currently unsupported.
+.Ss \&nn
+Temporarily turn off line numbering.
+Currently unsupported.
+.Ss \&nop
+Exexute the rest of the input line as a request or macro line.
+Currently unsupported.

 .Ss \&nr
 .Ss \&nr

-Define a register.
+Define or change a register.

 A register is an arbitrary string value that defines some sort of state,
 which influences parsing and/or formatting.
 Its syntax is as follows:
 .Pp
 A register is an arbitrary string value that defines some sort of state,
 which influences parsing and/or formatting.
 Its syntax is as follows:
 .Pp

-.D1 Pf \. Cm \&nr Ar name Ar value
+.D1 Pf \. Cm \&nr Ar name Oo +|- Oc Ns Ar expression

 .Pp
 .Pp

-The
-.Ar value
-may, at the moment, only be an integer.
-So far, only the following register
+For the syntax of
+.Ar expression ,
+see
+.Sx Numerical expressions
+below.
+If it is prefixed by a sign, the register will be
+incremented or decremented instead of assigned to.
+.Pp
+The following register

 .Ar name
 .Ar name

-is recognised:
+is handled specially:

 .Bl -tag -width Ds
 .It Cm nS
 If set to a positive integer value, certain
 .Bl -tag -width Ds
 .It Cm nS
 If set to a positive integer value, certain


@@ -512,6 +1376,142 @@ section with the
 .Cm \&Sh
 macro will reset this register.
 .El
 .Cm \&Sh
 macro will reset this register.
 .El

+.Ss \&nrf
+Define or change a floating-point register.
+This is a Heirloom extension and currently unsupported.
+.Ss \&nroff
+Force nroff mode.
+This is a groff extension and currently ignored.
+.Ss \&ns
+Turn on no-space mode.
+Currently ignored.
+.Ss \&nx
+Abort processing of the current input file and process another one.
+Ignored because insecure.
+.Ss \&open
+Open a file for writing.
+Ignored because insecure.
+.Ss \&opena
+Open a file for appending.
+Ignored because insecure.
+.Ss \&os
+Output saved vertical space.
+Currently ignored.
+.Ss \&output
+Output directly to intermediate output.
+Not supported.
+.Ss \&padj
+Globally control paragraph-at-once adjustment.
+This is a Heirloom extension and currently ignored.
+.Ss \&papersize
+Set the paper size.
+This is a Heirloom extension and currently ignored.
+.Ss \&pc
+Change the page number character.
+Currently ignored.
+.Ss \&pev
+Print environments.
+This is a groff extension and currently ignored.
+.Ss \&pi
+Pipe output to a shell command.
+Ignored because insecure.
+.Ss \&PI
+Low-level request used by
+.Sx \&BP .
+This is a Heirloom extension and currently unsupported.
+.Ss \&pl
+Change page length.
+Takes one height argument.
+Currently ignored.
+.Ss \&pm
+Print names and sizes of macros, strings, and diversions.
+Currently ignored.
+.Ss \&pn
+Change page number of the next page.
+Currently ignored.
+.Ss \&pnr
+Print all number registers.
+Currently ignored.
+.Ss \&po
+Set horizontal page offset.
+Currently ignored.
+.Ss \&ps
+Change point size.
+Takes one numerical argument.
+Currently ignored.
+.Ss \&psbb
+Retrieve the bounding box of a PostScript file.
+Currently unsupported.
+.Ss \&pshape
+Set a special shape for the current paragraph.
+This is a Heirloom extension and currently unsupported.
+.Ss \&pso
+Include output of a shell command.
+Ignored because insecure.
+.Ss \&ptr
+Print the names and positions of all traps.
+This is a groff extension and currently ignored.
+.Ss \&pvs
+Change post-vertical spacing.
+This is a groff extension and currently ignored.
+.Ss \&rchar
+Remove glyph definitions.
+Currently unsupported.
+.Ss \&rd
+Read from standard input.
+Currently ignored.
+.Ss \&recursionlimit
+Set the maximum stack depth for recursive macros.
+This is a Heirloom extension and currently ignored.
+.Ss \&return
+Exit a macro and return to the caller.
+Currently unsupported.
+.Ss \&rfschar
+Remove font-specific fallback glyph definitions.
+Currently unsupported.
+.Ss \&rhang
+Hang characters at right margin.
+This is a Heirloom extension and currently ignored.
+.Ss \&rj
+Justify unfilled text to the right margin.
+Currently ignored.
+.Ss \&rm
+Remove a request, macro or string.
+Its syntax is as follows:
+.Pp
+.D1 Pf \. Cm \&rm Ar name
+.Ss \&rn
+Rename a request, macro, diversion, or string.
+Currently unsupported.
+.Ss \&rnn
+Rename a number register.
+Currently unsupported.
+.Ss \&rr
+Remove a register.
+Its syntax is as follows:
+.Pp
+.D1 Pf \. Cm \&rr Ar name
+.Ss \&rs
+End no-space mode.
+Currently ignored.
+.Ss \&rt
+Return to marked vertical position.
+Currently ignored.
+.Ss \&schar
+Define global fallback glyph.
+This is a groff extension and currently unsupported.
+.Ss \&sentchar
+Define sentence-ending characters.
+This is a Heirloom extension and currently ignored.
+.Ss \&shc
+Change the soft hyphen character.
+Currently ignored.
+.Ss \&shift
+Shift macro arguments.
+Currently unsupported.
+.Ss \&sizes
+Define permissible point sizes.
+This is a groff extension and currently ignored.

 .Ss \&so
 Include a source file.
 Its syntax is as follows:
 .Ss \&so
 Include a source file.
 Its syntax is as follows:


@@ -523,229 +1523,583 @@ The
 will be read and its contents processed as input in place of the
 .Sq \&.so
 request line.
 will be read and its contents processed as input in place of the
 .Sq \&.so
 request line.

-To avoid inadvertant inclusion of unrelated files,
+To avoid inadvertent inclusion of unrelated files,

 .Xr mandoc 1
 only accepts relative paths not containing the strings
 .Qq ../
 and
 .Qq /.. .
 .Xr mandoc 1
 only accepts relative paths not containing the strings
 .Qq ../
 and
 .Qq /.. .

-.Ss \&tr
-Output character translation.
-This request is intended to have one argument,
-consisting of an even number of characters.
-Currently, it is ignored including its arguments,
-and the number of arguments is not checked.
+.Pp
+This request requires
+.Xr man 1
+to change to the right directory before calling
+.Xr mandoc 1 ,
+per convention to the root of the manual tree.
+Typical usage looks like:
+.Pp
+.Dl \&.so man3/Xcursor.3
+.Pp
+As the whole concept is rather fragile, the use of
+.Sx \&so
+is discouraged.
+Use
+.Xr ln 1
+instead.
+.Ss \&spacewidth
+Set the space width from the font metrics file.
+This is a Heirloom extension and currently ignored.
+.Ss \&special
+Define a special font.
+This is a groff extension and currently ignored.
+.Ss \&spreadwarn
+Warn about wide spacing between words.
+Currently ignored.
+.Ss \&ss
+Set space character size.
+Currently ignored.
+.Ss \&sty
+Associate style with a font position.
+This is a groff extension and currently ignored.
+.Ss \&substring
+Replace a user-defined string with a substring.
+Currently unsupported.
+.Ss \&sv
+Save vertical space.
+Currently ignored.
+.Ss \&sy
+Execute shell command.
+Ignored because insecure.

 .Ss \&T&
 Re-start a table layout, retaining the options of the prior table
 invocation.
 See
 .Sx \&TS .
 .Ss \&T&
 Re-start a table layout, retaining the options of the prior table
 invocation.
 See
 .Sx \&TS .

+.Ss \&ta
+Set tab stops.
+Takes an arbitrary number of arguments.
+Currently unsupported.
+.Ss \&tc
+Change tab repetion character.
+Currently unsupported.

 .Ss \&TE
 End a table context.
 See
 .Sx \&TS .
 .Ss \&TE
 End a table context.
 See
 .Sx \&TS .

+.Ss \&ti
+Temporary indent.
+Currently unsupported.
+.Ss \&tkf
+Enable track kerning for a font.
+Currently ignored.
+.Ss \&tl
+Print a title line.
+Currently unsupported.
+.Ss \&tm
+Print to standard error output.
+Currently ignored.
+.Ss \&tm1
+Print to standard error output, allowing leading blanks.
+This is a groff extension and currently ignored.
+.Ss \&tmc
+Print to standard error output without a trailing newline.
+This is a groff extension and currently ignored.
+.Ss \&tr
+Output character translation.
+Its syntax is as follows:
+.Pp
+.D1 Pf \. Cm \&tr Ar [ab]+
+.Pp
+Pairs of
+.Ar ab
+characters are replaced
+.Ar ( a
+for
+.Ar b ) .
+Replacement (or origin) characters may also be character escapes; thus,
+.Pp
+.Dl tr \e(xx\e(yy
+.Pp
+replaces all invocations of \e(xx with \e(yy.
+.Ss \&track
+Static letter space tracking.
+This is a Heirloom extension and currently ignored.
+.Ss \&transchar
+Define transparent characters for sentence-ending.
+This is a Heirloom extension and currently ignored.
+.Ss \&trf
+Output the contents of a file, disallowing invalid characters.
+This is a groff extension and ignored because insecure.
+.Ss \&trimat
+Set the TrimBox page parameter for PDF generation.
+This is a Heirloom extension and currently ignored.
+.Ss \&trin
+Output character translation, ignored by
+.Cm \&asciify .
+Currently unsupported.
+.Ss \&trnt
+Output character translation, ignored by \e!.
+Currently unsupported.
+.Ss \&troff
+Force troff mode.
+This is a groff extension and currently ignored.

 .Ss \&TS
 Begin a table, which formats input in aligned rows and columns.
 .Ss \&TS
 Begin a table, which formats input in aligned rows and columns.

-A table consists of an optional single line of table options terminated
-by a semicolon, followed by one or more lines of layout specification
-terminated by a period, then table data.
-A table block may also include
-.Nm ,
-.Xr mdoc 7 ,
+See
+.Xr tbl 7
+for a description of the tbl language.
+.Ss \&uf
+Globally set the underline font.
+Currently ignored.
+.Ss \&ul
+Underline.
+Currently ignored.
+.Ss \&unformat
+Unformat spaces and tabs in a diversion.
+Currently unsupported.
+.Ss \&unwatch
+Disable notification for string or macro.
+This is a Heirloom extension and currently ignored.
+.Ss \&unwatchn
+Disable notification for register.
+This is a Heirloom extension and currently ignored.
+.Ss \&vpt
+Enable or disable vertical position traps.
+This is a groff extension and currently ignored.
+.Ss \&vs
+Change vertical spacing.
+Currently ignored.
+.Ss \&warn
+Set warning level.
+Currently ignored.
+.Ss \&warnscale
+Set the scaling indicator used in warnings.
+This is a groff extension and currently ignored.
+.Ss \&watch
+Notify on change of string or macro.
+This is a Heirloom extension and currently ignored.
+.Ss \&watchlength
+On change, report the contents of macros and strings
+up to the sepcified length.
+This is a Heirloom extension and currently ignored.
+.Ss \&watchn
+Notify on change of register.
+This is a Heirloom extension and currently ignored.
+.Ss \&wh
+Set a page location trap.
+Currently unsupported.
+.Ss \&while
+Repeated execution while a condition is true.
+Currently unsupported.
+.Ss \&write
+Write to an open file.
+Ignored because insecure.
+.Ss \&writec
+Write to an open file without appending a newline.
+Ignored because insecure.
+.Ss \&writem
+Write macro or string to an open file.
+Ignored because insecure.
+.Ss \&xflag
+Set the extension level.
+This is a Heirloom extension and currently ignored.
+.Ss Numerical expressions
+The
+.Sx \&nr ,
+.Sx \&if ,
+and
+.Sx \&ie
+requests accept integer numerical expressions as arguments.
+These are always evaluated using the C
+.Vt int
+type; integer overflow works the same way as in the C language.
+Numbers consist of an arbitrary number of digits
+.Sq 0
+to
+.Sq 9
+prefixed by an optional sign
+.Sq +

 or
 or

-.Xr man 7
-macros.
-Example:
+.Sq - .
+Each number may be followed by one optional scaling unit described below
+.Sx Scaling Widths .
+The following equations hold:

 .Bd -literal -offset indent
 .Bd -literal -offset indent

-\&.TS
-box tab(:);   \e" Table-wide options.
-c | c         \e" Layout for first line.
-| c | c.      \e" Layout for all subsequent lines.
-1:2           \e" Data...
-3:4
-\&.TE
+1i = 6v = 6P = 10m = 10n = 72p = 1000M = 240u = 240
+254c = 100i = 24000u = 24000
+1f = 65536u = 65536

 .Ed
 .Pp
 .Ed
 .Pp

-Table data is
-.Em pre-processed ,
-that is, data rows are parsed then inserted into the underlying stream
-of input data.
-This allows data rows to be interspersed by arbitrary macros, such as
-.Bd -literal -offset indent
-\&.TS
-tab(:);
-c c c.
-1:2:3
-\&.Ao
-3:2:1
-\&.Ac
-\&.TE
-.Ed
+The following binary operators are implemented.
+Unless otherwise stated, they behave as in the C language:

 .Pp
 .Pp

-in the case of
-.Xr mdoc 7
-or
-.Bd -literal -offset indent
-\&.TS
-tab(:);
-c c c.
-\&.ds ab 2
-1:\e*(ab:3
-\&.I
-3:2:1
-\&.TE
-.Ed
+.Bl -tag -width 2n -compact
+.It Ic +
+addition
+.It Ic -
+subtraction
+.It Ic *
+multiplication
+.It Ic /
+division
+.It Ic %
+remainder of division
+.It Ic <
+less than
+.It Ic >
+greater than
+.It Ic ==
+equal to
+.It Ic =
+equal to, same effect as
+.Ic ==
+(this differs from C)
+.It Ic <=
+less than or equal to
+.It Ic >=
+greater than or equal to
+.It Ic <>
+not equal to (corresponds to C
+.Ic != ;
+this one is of limited portability, it is supported by Heirloom roff,
+but not by groff)
+.It Ic &
+logical and (corresponds to C
+.Ic && )
+.It Ic \&:
+logical or (corresponds to C
+.Ic \&|| )
+.It Ic <?
+minimum (not available in C)
+.It Ic >?
+maximum (not available in C)
+.El

 .Pp
 .Pp

-in the case of
-.Xr man 7 .
+There is no concept of precendence; evaluation proceeds from left to right,
+except when subexpressions are enclosed in parantheses.
+Inside parentheses, whitespace is ignored.
+.Sh ESCAPE SEQUENCE REFERENCE
+The
+.Xr mandoc 1
+.Nm
+parser recognises the following escape sequences.
+Note that the
+.Nm
+language defines more escape sequences not implemented in
+.Xr mandoc 1 .
+In
+.Xr mdoc 7
+and
+.Xr man 7
+documents, using escape sequences is discouraged except for those
+described in the
+.Sx LANGUAGE SYNTAX
+section above.

 .Pp
 .Pp

-The first line of a table consists of its options, which consists of
-space-separated keys and modifiers terminated by a semicolon.
-If the first line does not have a terminating semicolon, it is assumed
-that no options are specified and instead a layout is processed.
-Some options accept arguments enclosed by paranthesis.
-The following case-insensitive options are available:
-.Bl -tag -width Ds
-.It Cm center
-This option is not supported by
+A backslash followed by any character not listed here
+simply prints that character itself.
+.Ss \e<newline>
+A backslash at the end of an input line can be used to continue the
+logical input line on the next physical input line, joining the text
+on both lines together as if it were on a single input line.
+.Ss \e<space>
+The escape sequence backslash-space
+.Pq Sq \e\ \&
+is an unpaddable space-sized non-breaking space character; see
+.Sx Whitespace .
+.Ss \e\(dq
+The rest of the input line is treated as
+.Sx Comments .
+.Ss \e%
+Hyphenation allowed at this point of the word; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-This may also be invoked with
-.Cm centre .
-.It Cm delim
-Accepts a two-character argument.
-This option is not supported by
+.Ss \e&
+Non-printing zero-width character; see
+.Sx Whitespace .
+.Ss \e\(aq
+Acute accent special character; use
+.Sq \e(aa
+instead.
+.Ss \e( Ns Ar cc
+.Sx Special Characters
+with two-letter names, see
+.Xr mandoc_char 7 .
+.Ss \e*[ Ns Ar name ]
+Interpolate the string with the
+.Ar name ;
+see
+.Sx Predefined Strings
+and
+.Sx ds .
+For short names, there are variants
+.No \e* Ns Ar c
+and
+.No \e*( Ns Ar cc .
+.Ss \e-
+Special character
+.Dq mathematical minus sign .
+.Ss \e[ Ns Ar name ]
+.Sx Special Characters
+with names of arbitrary length, see
+.Xr mandoc_char 7 .
+.Ss \e^
+One-twelfth em half-narrow space character, effectively zero-width in

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm expand
-This option is not supported by
+.Ss \e`
+Grave accent special character; use
+.Sq \e(ga
+instead.
+.Ss \e{
+Begin conditional input; see
+.Sx if .
+.Ss \e\(ba
+One-sixth em narrow space character, effectively zero-width in

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm box
-Draw a single-line box around the table.
-This may also be invoked with
-.Cm frame .
-.It Cm doublebox
-Draw a double-line box around the table.
-This may also be invoked with
-.Cm doubleframe .
-.It Cm allbox
-This option is not supported by
+.Ss \e}
+End conditional input; see
+.Sx if .
+.Ss \e~
+Paddable non-breaking space character.
+.Ss \e0
+Digit width space character.
+.Ss \eA\(aq Ns Ar string Ns \(aq
+Anchor definition; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm tab
-Accepts a single-character argument.
-This character is used a delimiter between data cells, which otherwise
-defaults to the tab character.
-.It Cm linesize
-Accepts a natural number (all digits).
-This option is not supported by
+.Ss \eB\(aq Ns Ar string Ns \(aq
+Interpolate
+.Sq 1
+if
+.Ar string
+conforms to the syntax of
+.Sx Numerical expressions
+explained above and
+.Sq 0
+otherwise.
+.Ss \eb\(aq Ns Ar string Ns \(aq
+Bracket building function; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm nokeep
-This option is not supported by
+.Ss \eC\(aq Ns Ar name Ns \(aq
+.Sx Special Characters
+with names of arbitrary length.
+.Ss \ec
+When encountered at the end of an input text line,
+the next input text line is considered to continue that line,
+even if there are request or macro lines in between.
+No whitespace is inserted.
+.Ss \eD\(aq Ns Ar string Ns \(aq
+Draw graphics function; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm decimalpoint
-Accepts a single-character argument.
-This character will be used as the decimal point with the
-.Cm n
-layout key.
-This option is not supported by
+.Ss \ed
+Move down by half a line; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm nospaces
-This option is not supported by
+.Ss \ee
+Backslash special character.
+.Ss \eF[ Ns Ar name ]
+Switch font family (groff extension); ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.El
-.Pp
-The table layout follows table options, except in the case of
-.Sx \&T& ,
-where it immediately procedes invocation.
-Layout specifies how data rows are displayed on output.
-Each layout line corresponds to a line of data; the last layout line
-applies to all remaining data lines.
-Layout lines may also be separated by a comma.
-Each layout cell consists of one of the following case-insensitive keys:
-.Bl -tag -width Ds
-.It Cm c
-Centre a literal string within its column.
-.It Cm r
-Right-justify a literal string within its column.
-.It Cm l
-Left-justify a literal string within its column.
-.It Cm n
-Justify a number around its decimal point.
-If the decimal point is not found on the number, it's assumed to trail
-the number.
-.It Cm s
-This option is not supported by
+For short names, there are variants
+.No \eF Ns Ar c
+and
+.No \eF( Ns Ar cc .
+.Ss \ef[ Ns Ar name ]
+Switch to the font
+.Ar name ,
+see
+.Sx Text Decoration .
+For short names, there are variants
+.No \ef Ns Ar c
+and
+.No \ef( Ns Ar cc .
+.Ss \eg[ Ns Ar name ]
+Interpolate the format of a number register; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm a
-This option is not supported by
+For short names, there are variants
+.No \eg Ns Ar c
+and
+.No \eg( Ns Ar cc .
+.Ss \eH\(aq Ns Oo +|- Oc Ns Ar number Ns \(aq
+Set the height of the current font; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm ^
-This option is not supported by
+.Ss \eh\(aq Ns Ar number Ns \(aq
+Horizontal motion; ignored by

 .Xr mandoc 1 .
 .Xr mandoc 1 .

-.It Cm \-
-This may also be invoked with
-.Cm _ .
-.It Cm =
-.It Cm \(ba
-Emit a vertical bar instead of data.
-.It Cm \(ba\(ba
-Emit a double-vertical bar instead of data.
-.El
-.Pp
-Keys may be followed by a set of modifiers.
-A modifier is either a modifier key or a natural number for specifying
-spacing.
-The following case-insensitive modifier keys are available:
-.Bl -tag -width Ds
-.It Cm z
-.It Cm u
-.It Cm e
-.It Cm t
-.It Cm d
-.It Cm f
-Must be followed by a case-insensitive font style:
-.Cm b
-for bold or
-.Cm i
-for italic.
-.It Cm b
-.It Cm i
-.El
+.Ss \ek[ Ns Ar name ]
+Mark horizontal input place in register; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \ek Ns Ar c
+and
+.No \ek( Ns Ar cc .
+.Ss \eL\(aq Ns Ar number Ns Oo Ar c Oc Ns \(aq
+Vertical line drawing function; ignored by
+.Xr mandoc 1 .
+.Ss \el\(aq Ns Ar number Ns Oo Ar c Oc Ns \(aq
+Horizontal line drawing function; ignored by
+.Xr mandoc 1 .
+.Ss \eM[ Ns Ar name ]
+Set fill (background) color (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eM Ns Ar c
+and
+.No \eM( Ns Ar cc .
+.Ss \em[ Ns Ar name ]
+Set glyph drawing color (groff extension); ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \em Ns Ar c
+and
+.No \em( Ns Ar cc .
+.Ss \eN\(aq Ns Ar number Ns \(aq
+Character
+.Ar number
+on the current font.
+.Ss \en[ Ns Ar name ]
+Interpolate the number register
+.Ar name .
+For short names, there are variants
+.No \en Ns Ar c
+and
+.No \en( Ns Ar cc .
+.Ss \eo\(aq Ns Ar string Ns \(aq
+Overstrike, writing all the characters contained in the
+.Ar string
+to the same output position.
+In terminal and HTML output modes,
+only the last one of the characters is visible.
+.Ss \eR\(aq Ns Ar name Oo +|- Oc Ns Ar number Ns \(aq
+Set number register; ignored by
+.Xr mandoc 1 .
+.Ss \eS\(aq Ns Ar number Ns \(aq
+Slant output; ignored by
+.Xr mandoc 1 .
+.Ss \es\(aq Ns Oo +|- Oc Ns Ar number Ns \(aq
+Change point size; ignored by
+.Xr mandoc 1 .
+Alternative forms
+.No \es Ns Oo +|- Oc Ns Ar n ,
+.No \es Ns Oo +|- Oc Ns \(aq Ns Ar number Ns \(aq ,
+.No \es Ns [ Oo +|- Oc Ns Ar number ] ,
+and
+.No \es Ns Oo +|- Oc Ns [ Ar number Ns ]
+are also parsed and ignored.
+.Ss \et
+Horizontal tab; ignored by
+.Xr mandoc 1 .
+.Ss \eu
+Move up by half a line; ignored by
+.Xr mandoc 1 .
+.Ss \eV[ Ns Ar name ]
+Interpolate an environment variable; ignored by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eV Ns Ar c
+and
+.No \eV( Ns Ar cc .
+.Ss \ev\(aq Ns Ar number Ns \(aq
+Vertical motion; ignored by
+.Xr mandoc 1 .
+.Ss \ew\(aq Ns Ar string Ns \(aq
+Interpolate the width of the
+.Ar string .
+The
+.Xr mandoc 1
+implementation assumes that after expansion of user-defined strings, the
+.Ar string
+only contains normal characters, no escape sequences, and that each
+character has a width of 24 basic units.
+.Ss \eX\(aq Ns Ar string Ns \(aq
+Output
+.Ar string
+as device control function; ignored in nroff mode and by
+.Xr mandoc 1 .
+.Ss \ex\(aq Ns Ar number Ns \(aq
+Extra line space function; ignored by
+.Xr mandoc 1 .
+.Ss \eY[ Ns Ar name ]
+Output a string as a device control function; ignored in nroff mode and by
+.Xr mandoc 1 .
+For short names, there are variants
+.No \eY Ns Ar c
+and
+.No \eY( Ns Ar cc .
+.Ss \eZ\(aq Ns Ar string Ns \(aq
+Print
+.Ar string
+with zero width and height; ignored by
+.Xr mandoc 1 .
+.Ss \ez
+Output the next character without advancing the cursor position;
+approximated in
+.Xr mandoc 1
+by simply skipping the next character.

 .Sh COMPATIBILITY
 .Sh COMPATIBILITY

-This section documents compatibility between mandoc and other other
+The
+.Xr mandoc 1
+implementation of the

 .Nm
 .Nm

-implementations, at this time limited to GNU troff
-.Pq Qq groff .
-The term
-.Qq historic groff
-refers to groff version 1.15.
+language is intentionally incomplete.
+Unimplemented features include:

 .Pp
 .Bl -dash -compact
 .It
 .Pp
 .Bl -dash -compact
 .It

+For security reasons,
+.Xr mandoc 1
+never reads or writes external files except via
+.Sx \&so
+requests with safe relative paths.
+.It
+There is no automatic hyphenation, no adjustment to the right margin,
+and no centering; the output is always set flush-left.
+.It
+Support for setting tabulator positions
+and tabulator and leader characters is missing,
+and support for manually changing indentation is limited.
+.It

 The
 The

-.Cm nS
-register is only compatible with OpenBSD's groff-1.15.
+.Sq u
+scaling unit is the default terminal unit.
+In traditional troff systems, this unit changes depending on the
+output media.

 .It
 .It

-Historic groff did not accept white-space before a custom
-.Ar end
-macro for the
-.Sx \&ig
-request.
+Width measurements are implemented in a crude way
+and often yield wrong results.
+Explicit movement requests and escapes are ignored.
+.It
+There is no concept of output pages, no support for floats,
+graphics drawing, and picture inclusion;
+terminal output is always continuous.
+.It
+Requests regarding color, font families, and glyph manipulation
+are ignored.
+Font support is very limited.
+Kerning is not implemented, and no ligatures are produced.

 .It
 The
 .It
 The

-.Sx \&if
-and family would print funny white-spaces with historic groff when
-using the next-line syntax.
+.Qq \(aq
+macro control character does not suppress output line breaks.
+.It
+Diversions are not implemented,
+and support for traps is very incomplete.
+.It
+While recursion is supported,
+.Sx \&while
+loops are not.

 .El
 .El

+.Pp
+The special semantics of the
+.Cm nS
+number register is an idiosyncracy of
+.Ox
+manuals and not supported by other
+.Xr mdoc 7
+implementations.

 .Sh SEE ALSO
 .Xr mandoc 1 ,
 .Sh SEE ALSO
 .Xr mandoc 1 ,

+.Xr eqn 7 ,

 .Xr man 7 ,
 .Xr mandoc_char 7 ,
 .Xr man 7 ,
 .Xr mandoc_char 7 ,

-.Xr mdoc 7
-.\" .Rs
-.\" .%A M. E. Lesk
-.\" .%T Tbl\(emA Program to Format Tables
-.\" .%D June 11, 1976
-.\" .%U http://www.kohala.com/start/troff/v7/man/tbl/tbl.ps
-.\" .Re
+.Xr mdoc 7 ,
+.Xr tbl 7

 .Rs
 .%A Joseph F. Ossanna
 .%A Brian W. Kernighan
 .Rs
 .%A Joseph F. Ossanna
 .%A Brian W. Kernighan


@@ -766,19 +2120,27 @@ using the next-line syntax.
 .%U http://heirloom.sourceforge.net/doctools/troff.pdf
 .Re
 .Sh HISTORY
 .%U http://heirloom.sourceforge.net/doctools/troff.pdf
 .Re
 .Sh HISTORY

-The RUNOFF typesetting system was written in PL/1 for the CTSS
-operating system by Jerome ("Jerry") E. Saltzer in 1961.
-It was first used as the main documentation tool by Multics since 1963.
-Robert ("Bob") H. Morris ported it to the GE-635 and called it
+The RUNOFF typesetting system, whose input forms the basis for

 .Nm ,
 .Nm ,

-Doug McIlroy rewrote it in BCPL in 1969,
-Joseph F. Ossanna rewrote it in PDP-11 assembly in 1973,
-and Brian W. Kernighan rewrote it in C in 1975.
+was written in MAD and FAP for the CTSS operating system by Jerome E.
+Saltzer in 1964.
+Doug McIlroy rewrote it in BCPL in 1969, renaming it
+.Nm .
+Dennis M. Ritchie rewrote McIlroy's
+.Nm
+in PDP-11 assembly for
+.At v1 ,
+Joseph F. Ossanna improved roff and renamed it nroff
+for
+.At v2 ,
+then ported nroff to C as troff, which Brian W. Kernighan released with
+.At v7 .
+In 1989, James Clarke re-implemented troff in C++, naming it groff.

 .Sh AUTHORS
 .An -nosplit
 .Sh AUTHORS
 .An -nosplit

-This partial
+This

 .Nm
 reference was written by
 .Nm
 reference was written by

-.An Kristaps Dzonsons Aq kristaps@bsd.lv
+.An Kristaps Dzonsons Aq Mt kristaps@bsd.lv

 and
 and

-.An Ingo Schwarze Aq schwarze@openbsd.org .
+.An Ingo Schwarze Aq Mt schwarze@openbsd.org .