-# $Id: Makefile,v 1.430 2014/08/05 05:48:56 schwarze Exp $
+# $Id: Makefile,v 1.445 2014/10/25 01:03:52 schwarze Exp $
#
# Copyright (c) 2010, 2011, 2012 Kristaps Dzonsons <kristaps@bsd.lv>
# Copyright (c) 2011, 2013, 2014 Ingo Schwarze <schwarze@openbsd.org>
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-VERSION = 1.13.0
-
-# === USER SETTINGS ====================================================
-
-# --- user settings relevant for all builds ----------------------------
-
-# Specify this if you want to hard-code the operating system to appear
-# in the lower-left hand corner of -mdoc manuals.
-#
-# CFLAGS += -DOSNAME="\"OpenBSD 5.5\""
-
-# IFF your system supports multi-byte functions (setlocale(), wcwidth(),
-# putwchar()) AND has __STDC_ISO_10646__ (that is, wchar_t is simply a
-# UCS-4 value) should you define USE_WCHAR. If you define it and your
-# system DOESN'T support this, -Tlocale will produce garbage.
-# If you don't define it, -Tlocale is a synonym for -Tacsii.
-#
-CFLAGS += -DUSE_WCHAR
-
-CFLAGS += -g -DHAVE_CONFIG_H
-CFLAGS += -W -Wall -Wstrict-prototypes -Wno-unused-parameter -Wwrite-strings
-PREFIX = /usr/local
-BINDIR = $(PREFIX)/bin
-INCLUDEDIR = $(PREFIX)/include/mandoc
-LIBDIR = $(PREFIX)/lib/mandoc
-MANDIR = $(PREFIX)/man
-EXAMPLEDIR = $(PREFIX)/share/examples/mandoc
-
-INSTALL = install
-INSTALL_PROGRAM = $(INSTALL) -m 0555
-INSTALL_DATA = $(INSTALL) -m 0444
-INSTALL_LIB = $(INSTALL) -m 0444
-INSTALL_SOURCE = $(INSTALL) -m 0644
-INSTALL_MAN = $(INSTALL_DATA)
-
-# --- user settings related to database support ------------------------
-
-# If you want to build without database support, for example to avoid
-# the dependency on SQLite3, comment the following line.
-# However, you won't get apropos(1) and makewhatis(8) in that case.
-#
-BUILD_TARGETS += db-build
-
-# The remaining settings in this section
-# are only relevant if db-build is enabled.
-# Otherwise, they have no effect either way.
-
-# If your system has manpath(1), uncomment this. This is most any
-# system that's not OpenBSD or NetBSD. If uncommented, apropos(1)
-# and makewhatis(8) will use manpath(1) to get the MANPATH variable.
-#
-#CFLAGS += -DUSE_MANPATH
-
-# On some systems, SQLite3 may be installed below /usr/local.
-# In that case, uncomment the following two lines.
-#
-#CFLAGS += -I/usr/local/include
-#DBLIB += -L/usr/local/lib
-
-# OpenBSD has the ohash functions in libutil.
-# Comment the following line if your system doesn't.
-#
-DBLIB += -lutil
-
-SBINDIR = $(PREFIX)/sbin
-
-# --- user settings related to man.cgi ---------------------------------
-
-# To build man.cgi, copy cgi.h.example to cgi.h, edit it,
-# and enable the following line.
-# Obviously, this requires that db-build is enabled, too.
-#
-#BUILD_TARGETS += cgi-build
-
-# The remaining settings in this section
-# are only relevant if cgi-build is enabled.
-# Otherwise, they have no effect either way.
-
-# If your system does not support static binaries, comment this,
-# for example on Mac OS X.
-#
-STATIC = -static
-
-# Linux requires -pthread for statical linking.
-#
-#STATIC += -pthread
-
-WWWPREFIX = /var/www
-HTDOCDIR = $(WWWPREFIX)/htdocs
-CGIBINDIR = $(WWWPREFIX)/cgi-bin
-
-# === END OF USER SETTINGS =============================================
-
-INSTALL_TARGETS = $(BUILD_TARGETS:-build=-install)
-
-BASEBIN = mandoc preconv demandoc
-DBBIN = apropos makewhatis
+BASEBIN = mandoc demandoc
+DBBIN = makewhatis
CGIBIN = man.cgi
-DBLIB += -lsqlite3
-
-TESTSRCS = test-fgetln.c \
+TESTSRCS = test-dirent-namlen.c \
+ test-fgetln.c \
+ test-fts.c \
test-getsubopt.c \
test-mmap.c \
test-ohash.c \
test-reallocarray.c \
+ test-sqlite3.c \
+ test-sqlite3_errstr.c \
test-strcasestr.c \
test-strlcat.c \
test-strlcpy.c \
test-strptime.c \
- test-strsep.c
+ test-strsep.c \
+ test-wchar.c
-SRCS = apropos.c \
- arch.c \
+SRCS = arch.c \
att.c \
cgi.c \
chars.c \
compat_fgetln.c \
+ compat_fts.c \
compat_getsubopt.c \
compat_ohash.c \
compat_reallocarray.c \
+ compat_sqlite3_errstr.c \
compat_strcasestr.c \
compat_strlcat.c \
compat_strlcpy.c \
vol.c \
$(TESTSRCS)
-DISTFILES = LICENSE \
+DISTFILES = INSTALL \
+ LICENSE \
Makefile \
Makefile.depend \
NEWS \
att.in \
cgi.h.example \
chars.in \
+ compat_fts.h \
compat_ohash.h \
- config.h.post \
- config.h.pre \
configure \
+ configure.local.example \
demandoc.1 \
eqn.7 \
example.style.css \
main.h \
makewhatis.8 \
man-cgi.css \
+ man.1 \
man.7 \
man.cgi.8 \
man.h \
mdoc.h \
msec.in \
out.h \
- preconv.1 \
predefs.in \
roff.7 \
st.in \
mandoc.o \
mandoc_aux.o \
msec.o \
+ preconv.o \
read.o
COMPAT_OBJS = compat_fgetln.o \
+ compat_fts.o \
compat_getsubopt.o \
compat_ohash.o \
compat_reallocarray.o \
+ compat_sqlite3_errstr.o \
compat_strcasestr.o \
compat_strlcat.o \
compat_strlcpy.o \
out.o \
tree.o
-MAKEWHATIS_OBJS = mandocdb.o mansearch_const.o manpath.o
+MAN_OBJS = $(MANDOC_OBJS)
-PRECONV_OBJS = preconv.o
+MAKEWHATIS_OBJS = mandocdb.o mansearch_const.o manpath.o
-APROPOS_OBJS = apropos.o mansearch.o mansearch_const.o manpath.o
+APROPOS_OBJS = mansearch.o mansearch_const.o manpath.o
CGI_OBJS = $(MANDOC_HTML_OBJS) \
cgi.o \
WWW_MANS = apropos.1.html \
demandoc.1.html \
+ man.1.html \
mandoc.1.html \
- preconv.1.html \
mandoc.3.html \
mandoc_escape.3.html \
mandoc_html.3.html \
WWW_OBJS = mdocml.tar.gz \
mdocml.sha256
+include Makefile.local
+
+INSTALL_TARGETS = $(BUILD_TARGETS:-build=-install)
+
# === DEPENDENCY HANDLING ==============================================
-all: base-build $(BUILD_TARGETS)
+all: base-build $(BUILD_TARGETS) Makefile.local
base-build: $(BASEBIN)
www: $(WWW_OBJS) $(WWW_MANS)
-.include "Makefile.depend"
+$(WWW_MANS): mandoc
+
+include Makefile.depend
# === TARGETS CONTAINING SHELL COMMANDS ================================
+distclean: clean
+ rm -f Makefile.local config.h config.h.old config.log config.log.old
+
clean:
- rm -f libmandoc.a $(LIBMANDOC_OBJS)
- rm -f apropos $(APROPOS_OBJS)
+ rm -f libmandoc.a $(LIBMANDOC_OBJS) $(COMPAT_OBJS)
+ rm -f mandoc $(MANDOC_OBJS) $(APROPOS_OBJS)
rm -f makewhatis $(MAKEWHATIS_OBJS)
- rm -f preconv $(PRECONV_OBJS)
rm -f man.cgi $(CGI_OBJS)
rm -f manpage $(MANPAGE_OBJS)
rm -f demandoc $(DEMANDOC_OBJS)
- rm -f mandoc $(MANDOC_OBJS)
- rm -f config.h config.log $(COMPAT_OBJS)
rm -f $(WWW_MANS) $(WWW_OBJS)
rm -rf *.dSYM
$(INSTALL_LIB) libmandoc.a $(DESTDIR)$(LIBDIR)
$(INSTALL_LIB) man.h mandoc.h mandoc_aux.h mdoc.h \
$(DESTDIR)$(INCLUDEDIR)
- $(INSTALL_MAN) mandoc.1 preconv.1 demandoc.1 $(DESTDIR)$(MANDIR)/man1
+ $(INSTALL_MAN) man.1 mandoc.1 demandoc.1 \
+ $(DESTDIR)$(MANDIR)/man1
$(INSTALL_MAN) mandoc.3 mandoc_escape.3 mandoc_malloc.3 \
mchars_alloc.3 tbl.3 $(DESTDIR)$(MANDIR)/man3
$(INSTALL_MAN) man.7 mdoc.7 roff.7 eqn.7 tbl.7 mandoc_char.7 \
mkdir -p $(DESTDIR)$(MANDIR)/man3
mkdir -p $(DESTDIR)$(MANDIR)/man5
mkdir -p $(DESTDIR)$(MANDIR)/man8
- $(INSTALL_PROGRAM) apropos $(DESTDIR)$(BINDIR)
- ln -f $(DESTDIR)$(BINDIR)/apropos $(DESTDIR)$(BINDIR)/whatis
+ ln -f $(DESTDIR)$(BINDIR)/mandoc $(DESTDIR)$(BINDIR)/apropos
+ ln -f $(DESTDIR)$(BINDIR)/mandoc $(DESTDIR)$(BINDIR)/whatis
$(INSTALL_PROGRAM) makewhatis $(DESTDIR)$(SBINDIR)
$(INSTALL_MAN) apropos.1 $(DESTDIR)$(MANDIR)/man1
ln -f $(DESTDIR)$(MANDIR)/man1/apropos.1 \
$(INSTALL_DATA) mdocml.sha256 \
$(DESTDIR)$(HTDOCDIR)/snapshots/mdocml-$(VERSION).sha256
-Makefile.depend: $(SRCS) config.h Makefile
+Makefile.local config.h: configure ${TESTSRCS}
+ @echo "$@ is out of date; please run ./configure"
+ @exit 1
+
+depend: config.h
mkdep -f Makefile.depend $(CFLAGS) $(SRCS)
perl -e 'undef $$/; $$_ = <>; s|/usr/include/\S+||g; \
- s|\\\n||g; s| +| |g; print;' Makefile.depend > Makefile.tmp
+ s|\\\n||g; s| +| |g; s| $$||mg; print;' \
+ Makefile.depend > Makefile.tmp
mv Makefile.tmp Makefile.depend
libmandoc.a: $(COMPAT_OBJS) $(LIBMANDOC_OBJS)
$(AR) rs $@ $(COMPAT_OBJS) $(LIBMANDOC_OBJS)
-mandoc: $(MANDOC_OBJS) libmandoc.a
- $(CC) $(LDFLAGS) -o $@ $(MANDOC_OBJS) libmandoc.a
+mandoc: $(MAN_OBJS) libmandoc.a
+ $(CC) $(LDFLAGS) -o $@ $(MAN_OBJS) libmandoc.a $(DBLIB)
makewhatis: $(MAKEWHATIS_OBJS) libmandoc.a
$(CC) $(LDFLAGS) -o $@ $(MAKEWHATIS_OBJS) libmandoc.a $(DBLIB)
-preconv: $(PRECONV_OBJS)
- $(CC) $(LDFLAGS) -o $@ $(PRECONV_OBJS)
-
manpage: $(MANPAGE_OBJS) libmandoc.a
$(CC) $(LDFLAGS) -o $@ $(MANPAGE_OBJS) libmandoc.a $(DBLIB)
-apropos: $(APROPOS_OBJS) libmandoc.a
- $(CC) $(LDFLAGS) -o $@ $(APROPOS_OBJS) libmandoc.a $(DBLIB)
-
man.cgi: $(CGI_OBJS) libmandoc.a
$(CC) $(LDFLAGS) $(STATIC) -o $@ $(CGI_OBJS) libmandoc.a $(DBLIB)
mdocml.tar.gz: $(DISTFILES)
mkdir -p .dist/mdocml-$(VERSION)/
- $(INSTALL_SOURCE) $(DISTFILES) .dist/mdocml-$(VERSION)
+ $(INSTALL) -m 0644 $(DISTFILES) .dist/mdocml-$(VERSION)
chmod 755 .dist/mdocml-$(VERSION)/configure
( cd .dist/ && tar zcf ../$@ mdocml-$(VERSION) )
rm -rf .dist/
-config.h: configure config.h.pre config.h.post $(TESTSRCS)
- rm -f config.log
- CC="$(CC)" CFLAGS="$(CFLAGS)" VERSION="$(VERSION)" ./configure
-
-.PHONY: base-install clean cgi-install db-install install www-install
+.PHONY: base-install cgi-install db-install install www-install
+.PHONY: clean distclean depend
.SUFFIXES: .1 .3 .5 .7 .8 .h
.SUFFIXES: .1.html .3.html .5.html .7.html .8.html .h.html
git.ckatri.com / mandoc.git / blobdiff