aboutsummaryrefslogtreecommitdiffstatshomepage
Commit message (Collapse)AuthorAgeFilesLines
* Deprecate .Tn and .Ux, and make it clearer that .Bt and .Ud are deprecated.Ingo Schwarze2014-06-241-48/+24
| | | | | | | | | Do not use these macros in new documents, they provide no value. Instead, usually no macro and no markup is needed at all. Of course, they remain supported for compatibility with existing manuals. Jason McIntyre (OpenBSD), Thomas Klausner (NetBSD) and Franco Fichtner (DragonFly) are OK with this documentation change.
* Below DIAGNOSTICS, document the SYSERR message level;Ingo Schwarze2014-06-231-5/+7
| | | | jmc@ wondered what it meant and agrees with this patch.
* Minimal COMPATIBILITY cleanup:Ingo Schwarze2014-06-221-36/+7
| | | | | | | | * Mention that the list is incomplete. * I implemented %C for groff -current, and it was accepted. * Font family is \F, not \f. * Escapes and scaling widths are documented in roff(7), not here. * Quoting quotes by doubling them is now supported.
* Minimal cleanup of the COMPATIBILITY section:Ingo Schwarze2014-06-221-40/+11
| | | | | | | | | | * Mention that the list is incomplete. * Quoting quotes by doubling them is documented in the Ossanna/Kernighan/Ritter Nroff/Troff User's Manual, Section 7.3. * Our roff(7) manual documents handling of escape sequences; besides, we partially support \w and \z now. * Scaling widths are documented in roff(7) as well, and f is not \f. * Negative arguments to .sp are handled now.
* Reduce the verbosity of error messages caused by open(2) failures.Ingo Schwarze2014-06-212-5/+8
| | | | Suggested by and ok jmc@.
* Prefix messages about bad command line options and argumentsIngo Schwarze2014-06-212-12/+19
| | | | | with "mandoc: " or "makewhatis: ", respectively, similar to what we already do for other messages.
* As suggested by jmc@, only include line and column numbers into messagesIngo Schwarze2014-06-208-39/+51
| | | | | | | | | | | | | | when they are meaningful, to avoid confusing stuff like this: $ mandoc /dev/null mandoc: /dev/null:0:1: FATAL: not a manual Instead, just say: mandoc: /dev/null: FATAL: not a manual Another example this applies to is documents having a prologue, but lacking a body. Do not throw a FATAL error for these; instead, issue a WARNING and show the empty document, in the man(7) case with the same amount of blank lines as groff does. Also downgrade mdoc(7) documents having content before the first .Sh from FATAL to WARNING.
* Start systematic improvements of error reporting.Ingo Schwarze2014-06-206-33/+40
| | | | | | | | | | | So far, this covers all WARNINGs related to the prologue. 1) hierarchical naming of MANDOCERR_* constants 2) mention the macro name in messages where that adds clarity 3) add one missing MANDOCERR_DATE_MISSING msg 4) fix the wording of one message related to the man(7) prologue Started on the plane back from Ottawa.
* Prefix error messages from mandoc(1) with "mandoc: "Ingo Schwarze2014-06-201-2/+3
| | | | | | | just like almost all other utility programs do. Suggested by nick@ who wondered where messages came from when calling mandoc(1) from inside a Perl script. ok jmc@ nick@
* let the build system cope with the recent ohash changesIngo Schwarze2014-06-203-8/+14
|
* take a note about pandocIngo Schwarze2014-06-201-1/+5
|
* Merge from OpenBSD - Marc Espie improved the ohash interface:Ingo Schwarze2014-06-204-36/+38
| | | | | | * rename the halloc callback to calloc, provide overflow protection * rename the hfree callback to free, drop the useless size argument * prevent integer overflows in ohash_resize
* sync to OpenBSD:Ingo Schwarze2014-06-202-53/+52
| | | | whitespace and comment changes, no functional change
* More tweaking of set_basedir().Ingo Schwarze2014-06-201-24/+40
| | | | | | | | | | | | 1) Do not error out when getcwd(3) fails, only fail when inaccessibility of the cwd prevents processing of relative paths given on the command line. 2) Do not uselessly call set_basedir() twice in a row. While fts_read(3) in treescan() does cause the cwd to jump around, fts_close(3) is always called at the end, putting us back where we came from. The -d/-u fallback code already relied on this. 3) Fix the man-root-dir indicator in say().
* Some simple set_basedir() cleanup; more to come.Ingo Schwarze2014-06-191-17/+21
| | | | | | | | | | | | | | 1) Refrain from calling set_basedir() in the -t case, and do not attempt to strip anything from the file names in that case. Testing individual files cannot reasonably have any notion of a base dir. 2) Remove the possibility of passing NULL to set_basedir(). It was dangerous because it was not idempotent, and it served no purpose except closing a file descriptor right before exit(), which is pointless. Besides, the file descriptor is likely to be removed completely, soon. 3) Make sure that /foobar isn't treated as a subdirectory of /foo; this fixes a bug reported by espie@.
* Merge OpenBSD rev. 1.108 by sthen@; original commit message:Ingo Schwarze2014-06-181-2/+3
| | | | | | Don't display "unable to open mandoc.db" error messages (SQLITE_CANTOPEN) in the code which opens mandocdb's sqlite database when updating/deleting individual files (as used and only really useful for pkg_add/pkg_delete).
* some new things to doIngo Schwarze2014-06-101-1/+19
|
* Render roff escape sequences contained in manual page descriptionsIngo Schwarze2014-05-071-2/+11
| | | | | before putting them into the mpages table. Issue found by bentley@ in OpenBSD::Getopt(3p).
* Fix two memory leaks in makewhatis -n:Ingo Schwarze2014-05-071-2/+14
| | | | | 1. As found by nigel@, names_check() requires database access. 2. Do not leak names and strings in -n mode.
* Do not segfault in makewhatis -Q if the next .SH after .SH NAMEIngo Schwarze2014-05-071-4/+7
| | | | does not have any arguments. Crash found by nigel@ in kermit(1).
* Improve error handling in dbopen(). If PRAGMA SQL statements fail,Ingo Schwarze2014-04-271-7/+22
| | | | | | | | | | | | | report the error, close the database, and return failure from dbopen(), such that the main program can recover and rebuild the database. As noticed by stsp@, this can happen when database files are accessible, but corrupt or in the wrong format, which will now automatically be repaired. Besides, use a safer idiom after sqlite3_open*() failure that also handles out-of-memory situations correctly, and do not forget to close the database after CREATE TABLE failure.
* OMRON used uppercase for the model names of their Motorola 88100 LUNAIngo Schwarze2014-04-271-3/+3
| | | | | | workstations, so show the kernel architecture names in uppercase to the user, too. Based on a patch from Kenji Aoyama@, thanks!
* Fix a minor optimization i broke in rev. 1.163 on August 20, 2010:Ingo Schwarze2014-04-251-2/+2
| | | | | | Do not bother looking into the hash table when the length of the macro already tells us it's invalid. No functional change. Noticed by jsg@, thanks!
* Reduce the verbosity of makewhatis -t:Ingo Schwarze2014-04-252-4/+6
| | | | | | | | In the past, it always showed the title lines of the files processed. Now, it only shows them when called with -D. That is better because pkg_create calls makewhatis -t. It is also more consistent with -D behaviour in non- -t modes. Issue reported by ajacoutot@; ok espie@ ajacoutot@ jasper@.
* Various Makefile improvements:Ingo Schwarze2014-04-241-20/+43
| | | | | | | | * Use sha256 rather than md5. * Update .h dependencies for some objects. * Provide `www' target to build everything needed for the web site. * Move .SUFFIXES and .PHONY technicalities to the bottom. * State Copyright and license, just for clarity.
* misplaced punctuationIngo Schwarze2014-04-241-4/+4
|
* prototype for reallocarray()Ingo Schwarze2014-04-231-0/+3
|
* Audit malloc(3)/calloc(3)/realloc(3) usage.Ingo Schwarze2014-04-231-5/+4
| | | | First committed to wrong branch, sorry.
* Audit malloc(3)/calloc(3)/realloc(3) usage.Ingo Schwarze2014-04-2315-40/+104
| | | | | | | * Change eight reallocs to reallocarray to be safe from overflows. * Change one malloc to reallocarray to be safe from overflows. * Change one calloc to reallocarray, no zeroing needed. * Change the order of arguments of three callocs (aesthetical).
* Audit strlcpy(3)/strlcat(3) usage:Ingo Schwarze2014-04-231-23/+23
| | | | | | * Add missing truncation checks to three calls. * In four cases where we know that the distination buffer is large enough, cast the return vailue to (void).
* espie@ suggests using SQL viewsIngo Schwarze2014-04-231-1/+7
|
* improve SQL style: avoid "SELECT *", be explicit in what columns we want;Ingo Schwarze2014-04-232-7/+10
| | | | suggested by espie@.
* Audit strlcpy(3)/strlcat(3) usage.Ingo Schwarze2014-04-239-103/+86
| | | | | | | | | | | | | * Repair three instances of silent truncation, use asprintf(3). * Change two instances of strlen(3)+malloc(3)+strlcpy(3)+strlcat(3)+... to use asprintf(3) instead to make them less error prone. * Cast the return value of four instances where the destination buffer is known to be large enough to (void). * Completely remove three useless instances of strlcpy(3)/strlcat(3). * Mark two places in -Thtml with XXX that can cause information loss and crashes but are not easy to fix, requiring design changes of some internal interfaces. * The file mandocdb.c remains to be audited.
* add a LICENSE file for clarity and for the convenience of portersIngo Schwarze2014-04-222-1/+45
|
* in debug messages, truncating strings of excessive lengths is actuallyIngo Schwarze2014-04-201-2/+2
| | | | | a good thing, so cast the return value from sprintf to (void); this concludes the mandoc sprintf audit
* strlen+malloc+snprintf is error prone;Ingo Schwarze2014-04-201-23/+14
| | | | rewrite post_lb() to use asprintf(3) instead
* fix unchecked snprintf(3) in page header printing:Ingo Schwarze2014-04-204-22/+37
| | | | | the length of the title is unknown, and speed doesn't matter here, so use asprintf/free rather than a static buffer
* make sure static buffers for snprintf(3) are large enoughIngo Schwarze2014-04-205-22/+21
| | | | and cast snprintf return value to (void) where they are
* KNF: case (FOO): -> case FOO:, remove /* LINTED */ and /* ARGSUSED */,Ingo Schwarze2014-04-2052-2546/+2037
| | | | | remove trailing whitespace and blanks before tabs, improve some indenting; no functional change
* Two minor tweaks regarding the fallback from -u/-d to default mode:Ingo Schwarze2014-04-191-7/+9
| | | | | | | (1) Use all files found on the command line, but do *not* use all stray files found during fallback tree recursion. (2) If the fallback works, call that success, i.e. exit(0). As pointed out by naddy@, the latter is required for ports' happiness.
* Properly handle symlinks (hardlinks and .so only files were already ok):Ingo Schwarze2014-04-191-17/+76
| | | | | | | | Use the file name of the symlink but the inode number of the file pointed to, such that we get multiple mlinks records but not multiple mpages records. Also make sure they do not point outside the tree we are processing. Issue found by kili@ in desktop-file-edit(1), thanks!
* In update mode, when opening the database fails, probably because it isIngo Schwarze2014-04-181-8/+18
| | | | | | | | missing or corrupt, just rebuild it from scratch. This also helps when installing the very first port on a freshly installed machine and is similar to what espie@'s classical makewhatis(8) did. Issue reported by naddy@ via kili@.
* Slowly, the dust begins to settle.Ingo Schwarze2014-04-184-26/+26
| | | | | We are keeping the traditional name makewhatis(8). No content change.
* Fix a few lies; polish wording and formatting while here.Ingo Schwarze2014-04-181-25/+32
|
* Garbage collect one pair of needless parentheses in SQL code generation;Ingo Schwarze2014-04-171-8/+8
| | | | | note this doesn't affect performance, SQLite generates the same byte code. While here, make the calls to exprspec() easier to understand.
* Rename the mpages.id column to mpages.pageid. There is no good reasonIngo Schwarze2014-04-162-30/+30
| | | | to call this kid by a different name here than in all other tables.
* Give the mlinks and keys tables a pageid index,Ingo Schwarze2014-04-161-2/+4
| | | | | | | | | | | | | | | | as suggested by jeremy@ and espie@. The mlinks index speeds up basic apropos(1) searches by around 30% because it speeds up the final SELECT FROM mlinks query by about 95%. For large result sets, the overall speedup gets even larger, in the extreme case of "apropos Nd~." bymore than 90%. The keys index finally makes the apropos(1) -O option usable: It no longer incurs relevant extra cost, while in the past it was embarrassingly slow. This comes at a cost: Total database build times grow by about 5%, and each index adds about 10% database size with -Q. I consider that acceptable in view of the huge apropos(1) performance gains. The -Q database for /usr/share/man still remains below 1 MB.
* Pass the function flags SQLITE_UTF8 (because SQLITE_ANY is deprecated)Ingo Schwarze2014-04-161-3/+5
| | | | | | and SQLITE_DETERMINISTIC when creating deterministic functions; best practice measure suggested by espie@ and jeremy@; as expected by jeremy@, no measurable effect on performance.
* Oops, sorry, revert previous and commit the correct patch:Ingo Schwarze2014-04-151-5/+7
| | | | At the end of mansearch(), fchdir() back to where we started from.
* At the end of mansearch(), fchdir() back to where we started from;Ingo Schwarze2014-04-151-1/+2
| | | | | this is cleaner and helps to not scatter gmon.out files all over the place when profiling.
generated by cgit v1.2.3-56-ge451 (git 2.39.0) at 2024-06-30 23:12:10 +0000