Do not expose password if it is empty and PWF_STANDARD format is requested

[pw-darwin.git] / pw / pw.8

diff --git a/pw/pw.8 b/pw/pw.8
index c7b021dae04350fe8a950a0312e66dcc60c5a1a8..6b6a6727fb0ed511eb583ce67a335ea73c0bc8ba 100644 (file)
--- a/pw/pw.8
+++ b/pw/pw.8
@@ -1,17 +1,38 @@
-.\" Copyright (c) 1996
-.\"    David L. Nugent.
-.\"    Password Maintenance
+.\" Copyright (C) 1996
+.\" David L. Nugent.  All rights reserved.

 .\"
 .\"

-.\"    $Id: pw.8,v 1.3 1996/11/18 03:09:01 davidn Exp $
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.

 .\"
 .\"

-.Dd November 13, 1996
+.\" THIS SOFTWARE IS PROVIDED BY DAVID L. NUGENT AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL DAVID L. NUGENT OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.\"
+.Dd December 9, 1996

 .Dt PW 8
 .Os
 .Sh NAME
 .Nm pw
 .Dt PW 8
 .Os
 .Sh NAME
 .Nm pw

-.Nd create, remove and modify system users and groups
+.Nd create, remove, modify & display system users and groups

 .Sh SYNOPSIS
 .Sh SYNOPSIS

-.Nm pw
+.Nm
+.Op Fl V Ar etcdir

 .Ar useradd
 .Op name|uid
 .Op Fl C Ar config
 .Ar useradd
 .Op name|uid
 .Op Fl C Ar config


@@ -26,14 +47,19 @@
 .Op Fl G Ar grouplist
 .Op Fl m
 .Op Fl k Ar dir
 .Op Fl G Ar grouplist
 .Op Fl m
 .Op Fl k Ar dir

+.Op Fl w Ar method

 .Op Fl s Ar shell
 .Op Fl o
 .Op Fl L Ar class
 .Op Fl h Ar fd
 .Op Fl s Ar shell
 .Op Fl o
 .Op Fl L Ar class
 .Op Fl h Ar fd

-.Nm pw
+.Op Fl N
+.Op Fl P
+.Op Fl Y
+.Nm
+.Op Fl V Ar etcdir

 .Ar useradd
 .Op name|uid
 .Ar useradd
 .Op name|uid

-.Op Fl D
+.Fl D

 .Op Fl C Ar config
 .Op Fl q
 .Op Fl b Ar dir
 .Op Fl C Ar config
 .Op Fl q
 .Op Fl b Ar dir


@@ -42,17 +68,21 @@
 .Op Fl g Ar group
 .Op Fl G Ar grouplist
 .Op Fl k Ar dir
 .Op Fl g Ar group
 .Op Fl G Ar grouplist
 .Op Fl k Ar dir

-.Op Fl u Ar min,max
-.Op Fl i Ar min,max
+.Op Fl u Ar min , Ns Ar max
+.Op Fl i Ar min , Ns Ar max

 .Op Fl w Ar method
 .Op Fl s Ar shell
 .Op Fl w Ar method
 .Op Fl s Ar shell

-.Nm pw
+.Op Fl y Ar path
+.Nm
+.Op Fl V Ar etcdir

 .Ar userdel
 .Op name|uid
 .Op Fl n Ar name
 .Op Fl u Ar uid
 .Op Fl r
 .Ar userdel
 .Op name|uid
 .Op Fl n Ar name
 .Op Fl u Ar uid
 .Op Fl r

-.Nm pw
+.Op Fl Y
+.Nm
+.Op Fl V Ar etcdir

 .Ar usermod
 .Op name|uid
 .Op Fl C Ar config
 .Ar usermod
 .Op name|uid
 .Op Fl C Ar config


@@ -68,162 +98,263 @@
 .Op Fl l Ar name
 .Op Fl m
 .Op Fl k Ar dir
 .Op Fl l Ar name
 .Op Fl m
 .Op Fl k Ar dir

+.Op Fl w Ar method

 .Op Fl s Ar shell
 .Op Fl L Ar class
 .Op Fl h Ar fd
 .Op Fl s Ar shell
 .Op Fl L Ar class
 .Op Fl h Ar fd

-.Nm pw
+.Op Fl N
+.Op Fl P
+.Op Fl Y
+.Nm
+.Op Fl V Ar etcdir

 .Ar usershow
 .Op name|uid
 .Op Fl n Ar name
 .Op Fl u Ar uid
 .Op Fl F
 .Ar usershow
 .Op name|uid
 .Op Fl n Ar name
 .Op Fl u Ar uid
 .Op Fl F

-.Op Fl p
+.Op Fl P
+.Op Fl 7

 .Op Fl a
 .Op Fl a

-.Nm pw
+.Nm
+.Op Fl V Ar etcdir
+.Ar usernext
+.Op Fl C Ar config
+.Op Fl q
+.Nm
+.Op Fl V Ar etcdir

 .Ar groupadd
 .Op group|gid
 .Op Fl C Ar config
 .Op Fl q
 .Op Fl n Ar group
 .Op Fl g Ar gid
 .Ar groupadd
 .Op group|gid
 .Op Fl C Ar config
 .Op Fl q
 .Op Fl n Ar group
 .Op Fl g Ar gid

+.Op Fl M Ar members

 .Op Fl o
 .Op Fl h Ar fd
 .Op Fl o
 .Op Fl h Ar fd

-.Nm pw
+.Op Fl N
+.Op Fl P
+.Op Fl Y
+.Nm
+.Op Fl V Ar etcdir

 .Ar groupdel
 .Ar groupdel

+.Op group|gid

 .Op Fl n Ar name
 .Op Fl g Ar gid
 .Op Fl n Ar name
 .Op Fl g Ar gid

-.Nm pw
+.Op Fl Y
+.Nm
+.Op Fl V Ar etcdir

 .Ar groupmod
 .Ar groupmod

+.Op group|gid

 .Op Fl C Ar config
 .Op Fl q
 .Op Fl C Ar config
 .Op Fl q

-.Op Fl F

 .Op Fl n Ar name
 .Op Fl g Ar gid
 .Op Fl l Ar name
 .Op Fl n Ar name
 .Op Fl g Ar gid
 .Op Fl l Ar name

+.Op Fl M Ar members
+.Op Fl m Ar newmembers

 .Op Fl h Ar fd
 .Op Fl h Ar fd

-.Nm pw
+.Op Fl N
+.Op Fl P
+.Op Fl Y
+.Nm
+.Op Fl V Ar etcdir

 .Ar groupshow
 .Ar groupshow

+.Op group|gid

 .Op Fl n Ar name
 .Op Fl g Ar gid
 .Op Fl F
 .Op Fl n Ar name
 .Op Fl g Ar gid
 .Op Fl F

-.Op Fl p
+.Op Fl P

 .Op Fl a
 .Op Fl a

+.Nm
+.Op Fl V Ar etcdir
+.Ar groupnext
+.Op Fl C Ar config
+.Op Fl q
+.Nm
+.Op Fl V Ar etcdir
+.Ar lock
+.Op name|uid
+.Op Fl C Ar config
+.Op Fl q
+.Nm
+.Op Fl V Ar etcdir
+.Ar unlock
+.Op name|uid
+.Op Fl C Ar config
+.Op Fl q

 .Sh DESCRIPTION
 .Sh DESCRIPTION

-.Nm pw
-is a command-line based editor for the system
-.Em user
+The
+.Nm
+utility is a command-line based editor for the system
+.Ar user

 and
 and

-.Em group
-files, allowing the superuser and easy to use and standardised way of adding,
+.Ar group
+files, allowing the superuser an easy to use and standardized way of adding,

 modifying and removing users and groups.
 Note that
 modifying and removing users and groups.
 Note that

-.Nm pw
-only operates on the local user and group files; NIS users and groups must be
-maintained on the NIS server.
-.Nm pw
-handles updating the passwd, master.passwd, group and the secure and insecure
+.Nm
+only operates on the local user and group files.
+.Tn NIS
+users and groups must be
+maintained on the
+.Tn NIS
+server.
+The
+.Nm
+utility handles updating the
+.Pa passwd ,
+.Pa master.passwd ,
+.Pa group
+and the secure and insecure

 password database files, and must be run as root.
 .Pp
 password database files, and must be run as root.
 .Pp

-The first one or two keywords provided on
-.Xr pw 8 's
-command line provide the context for the remainder of the arguments.
-One of the keywords
+The first one or two keywords provided to
+.Nm
+on the command line provide the context for the remainder of the arguments.
+The keywords

 .Ar user
 and
 .Ar group
 .Ar user
 and
 .Ar group

-may be combined or provided separately with
+may be combined with

 .Ar add ,
 .Ar del ,
 .Ar add ,
 .Ar del ,

-.Ar mod
-or
+.Ar mod ,

 .Ar show ,
 .Ar show ,

-and may be specified in either order (ie. showuser, usershow, show user and user show
-are all considered to be the same thing).
-This flexiblity is useful for interactive scripts which call
-.Nm pw 
-for the actual user and group database manipulation.
+or
+.Ar next
+in any order.
+(For example,
+.Ar showuser ,
+.Ar usershow ,
+.Ar show user ,
+and
+.Ar user show
+all mean the same thing.)
+This flexibility is useful for interactive scripts calling
+.Nm
+for user and group database manipulation.

 Following these keywords, you may optionally specify the user or group name or numeric
 id as an alternative to using the
 .Fl n Ar name ,
 .Fl u Ar uid ,
 .Fl g Ar gid
 Following these keywords, you may optionally specify the user or group name or numeric
 id as an alternative to using the
 .Fl n Ar name ,
 .Fl u Ar uid ,
 .Fl g Ar gid

-switches.
+options.

 .Pp
 .Pp

-The following flags are common to most modes of operation:
+The following flags are common to most or all modes of operation:

 .Pp
 .Pp

-.Bl -tag -width "-C config"
+.Bl -tag -width "-G grouplist"
+.It Fl V Ar etcdir
+This flag sets an alternate location for the password, group and configuration files,
+and may be used to maintain a user/group database in an alternate location.
+If this switch is specified, the system
+.Pa /etc/pw.conf
+will not be sourced for default configuration data, but the file pw.conf in the
+specified directory will be used instead (or none, if it does not exist).
+The
+.Fl C
+flag may be used to override this behaviour.
+As an exception to the general rule where options must follow the operation
+type, the
+.Fl V
+flag may be used on the command line before the operation keyword.

 .It Fl C Ar config
 By default,
 .It Fl C Ar config
 By default,

-.Nm pw
+.Nm

 reads the file
 .Pa /etc/pw.conf
 reads the file
 .Pa /etc/pw.conf

-to obtain policy information on how new user accounts and groups are to be created,
-and the
-.Fl c
-option overrides this to read a different file.
-Most of the contents in the configuration file may be overridden via command line
-options, but it may be more useful to set up standard information for addition of
-new accounts in the configuration
-file.
+to obtain policy information on how new user accounts and groups are to be created.
+The
+.Fl C
+option specifies a different configuration file.
+While most of the contents of the configuration file may be overridden via
+command-line options, it may be more convenient to keep standard information in a
+configuration file.

 .It Fl q
 Use of this option causes
 .It Fl q
 Use of this option causes

-.Nm pw
+.Nm

 to suppress error messages, which may be useful in interactive environments where it
 is preferable to interpret status codes returned by
 to suppress error messages, which may be useful in interactive environments where it
 is preferable to interpret status codes returned by

-.Nm pw
+.Nm

 rather than messing up a carefully formatted display.
 rather than messing up a carefully formatted display.

+.It Fl N
+This option is available in
+.Ar add
+and
+.Ar modify
+operations, and tells
+.Nm
+to output the result of the operation without updating the user or group
+databases.
+You may use the
+.Fl P
+option to switch between standard passwd and readable formats.
+.It Fl Y
+Using this option with any of the update modes causes
+.Nm
+to run
+.Xr make 1
+after changing to the directory
+.Pa /var/yp .
+This is intended to allow automatic updating of
+.Tn NIS
+database files.
+If separate passwd and group files are being used by
+.Tn NIS ,
+then use the
+.Fl y Ar path
+option to specify the location of the
+.Tn NIS
+passwd database so that
+.Nm
+will concurrently update it with the system password
+databases.

 .El
 .El

-.Pp

 .Sh USER OPTIONS
 The following options apply to the
 .Sh USER OPTIONS
 The following options apply to the

-.Ar useradd ,
+.Ar useradd

 and
 and

-.Ar usermod ,
+.Ar usermod

 commands:
 .Pp
 commands:
 .Pp

-.Bl -tag -width "-C config"
+.Bl -tag -width "-G grouplist"

 .It Fl n Ar name
 .It Fl n Ar name

-Specifies the user/account name.
+Specify the user/account name.

 .It Fl u Ar uid
 .It Fl u Ar uid

-Specifies the user/account numeric id.
+Specify the user/account numeric id.

 .Pp
 .Pp

-Usually, you need only to provide one or the other of these options, as the account
-name will imply the uid, and vice verca.
-Also, you may provide either the account or userid immediately after the
-.Ar useradd ,
-.Ar userdel ,
-.Ar usermod
-or
-.Ar usershow
-keyword on the command line without the need to use
-.Ql Fl n
-or
-.Ql Fl u .
-There are times, however, were you need to provide both.
+Usually, you only need to provide one or the other of these options, as the account
+name will imply the uid, or vice versa.
+However, there are times when you need to provide both.

 For example, when changing the uid of an existing user with
 .Ar usermod ,
 or overriding the default uid when creating a new account.
 If you wish
 For example, when changing the uid of an existing user with
 .Ar usermod ,
 or overriding the default uid when creating a new account.
 If you wish

-.Nm pw
-to automatically allocate the uid to a new user on
+.Nm
+to automatically allocate the uid to a new user with

 .Ar useradd ,
 then you should
 .Em not
 use the
 .Ar useradd ,
 then you should
 .Em not
 use the

-.Ql Fl u
-switch.
+.Fl u
+option.
+You may also provide either the account or userid immediately after the
+.Ar useradd ,
+.Ar userdel ,
+.Ar usermod
+or
+.Ar usershow
+keywords on the command line without using the
+.Fl n
+or
+.Fl u
+options.

 .El
 .Pp
 .El
 .Pp

-Options available with both
-.Ar useradd
-and
-.Ar usermod
-are:

 .Bl -tag -width "-G grouplist"
 .It Fl c Ar comment
 This field sets the contents of the passwd GECOS field, which normally contains up
 to four comma-separated fields containing the user's full name, office or location,
 .Bl -tag -width "-G grouplist"
 .It Fl c Ar comment
 This field sets the contents of the passwd GECOS field, which normally contains up
 to four comma-separated fields containing the user's full name, office or location,

-work and home phone numbers.
+and work and home phone numbers.

 These sub-fields are used by convention only, however, and are optional.
 If this field is to contain spaces, you need to quote the comment itself with double
 quotes
 These sub-fields are used by convention only, however, and are optional.
 If this field is to contain spaces, you need to quote the comment itself with double
 quotes


@@ -231,89 +362,103 @@ quotes
 Avoid using commas in this field as these are used as sub-field separators, and the
 colon
 .Ql \&:
 Avoid using commas in this field as these are used as sub-field separators, and the
 colon
 .Ql \&:

-character also cannot be used as this is the field separator in the passwd file.
+character also cannot be used as this is the field separator for the passwd
+file itself.

 .It Fl d Ar dir
 This option sets the account's home directory.
 Normally, you will only use this if the home directory is to be different from the
 .It Fl d Ar dir
 This option sets the account's home directory.
 Normally, you will only use this if the home directory is to be different from the

-default (which is determined from pw.conf, which specifies the base home directory
-- normally /home - with the account name as a subdirectory).
+default determined from
+.Pa /etc/pw.conf
+- normally
+.Pa /home
+with the account name as a subdirectory.

 .It Fl e Ar date
 .It Fl e Ar date

-Sets the account's expiration date. 
+Set the account's expiration date.

 Format of the date is either a UNIX time in decimal, or a date in
 Format of the date is either a UNIX time in decimal, or a date in

-.Ql \& dd-mmm-yy[yy]
+.Ql dd-mmm-yy[yy]

 format, where dd is the day, mmm is the month, either in numeric or alphabetic format
 format, where dd is the day, mmm is the month, either in numeric or alphabetic format

-('Jan', 'Feb' etc) and year is either a two or four digit year.
+('Jan', 'Feb', etc) and year is either a two or four digit year.

 This option also accepts a relative date in the form
 .Ql \&+n[mhdwoy]
 where
 .Ql \&n
 is a decimal, octal (leading 0) or hexadecimal (leading 0x) digit followed by the
 This option also accepts a relative date in the form
 .Ql \&+n[mhdwoy]
 where
 .Ql \&n
 is a decimal, octal (leading 0) or hexadecimal (leading 0x) digit followed by the

-number of Minutes, Hours, Days, Weeks, mOnths or Years from the current date at
-which the expiry date is to be set.
+number of Minutes, Hours, Days, Weeks, Months or Years from the current date at
+which the expiration date is to be set.

 .It Fl p Ar date
 .It Fl p Ar date

-Sets the account's password expiration date.
-This field is identical to the account expiration date option, except that it
+Set the account's password expiration date.
+This field is similar to the account expiration date option, except that it

 applies to forced password changes.
 applies to forced password changes.

-The same formats are accepted as with the account expiratino option.
+This is set in the same manner as the
+.Fl e
+option.

 .It Fl g Ar group
 .It Fl g Ar group

-Sets the account's primary group to the given group.
+Set the account's primary group to the given group.

 .Ar group
 .Ar group

-may be either the group name or its corresponding group id number.
+may be defined by either its name or group number.

 .It Fl G Ar grouplist
 .It Fl G Ar grouplist

-Sets the additional groups to which an account belongs.
+Set additional group memberships for an account.

 .Ar grouplist
 .Ar grouplist

-is a comma-separated list or group names or group ids.
-When adding a user, the user's name is added to the group lists in
+is a comma-separated list of group names or group numbers.
+The user's name is added to the group lists in

 .Pa /etc/group ,
 .Pa /etc/group ,

-and when editing a user, the user's name is also added to the group lists, and
+and

 removed from any groups not specified in
 .Ar grouplist .
 removed from any groups not specified in
 .Ar grouplist .

-Note: a user should not be added to their primary group in
-.Pa /etc/group .
-Also, group membership changes do not take effect immediately for current logins,
-only logins subsequent to the change.
+Note: a user should not be added to their primary group with
+.Ar grouplist .
+Also, group membership changes do not take effect for current user login
+sessions, requiring the user to reconnect to be affected by the changes.
+.It Fl L Ar class
+This option sets the login class for the user being created.
+See
+.Xr login.conf 5
+and
+.Xr passwd 5
+for more information on user login classes.

 .It Fl m
 This option instructs
 .It Fl m
 This option instructs

-.Nm pw
+.Nm

 to attempt to create the user's home directory.
 While primarily useful when adding a new account with
 .Ar useradd ,
 this may also be of use when moving an existing user's home directory elsewhere on
 to attempt to create the user's home directory.
 While primarily useful when adding a new account with
 .Ar useradd ,
 this may also be of use when moving an existing user's home directory elsewhere on

-the filesystem.
+the file system.

 The new home directory is populated with the contents of the
 .Ar skeleton
 directory, which typically contains a set of shell configuration files that the
 The new home directory is populated with the contents of the
 .Ar skeleton
 directory, which typically contains a set of shell configuration files that the

-user may personalise to taste.
+user may personalize to taste.

 When
 When

-.Ql Fl m
+.Fl m

 is used on an account with
 .Ar usermod ,
 is used on an account with
 .Ar usermod ,

-any existing configuration files in the user's home directory are
+existing configuration files in the user's home directory are

 .Em not
 .Em not

-overwritten with the prototype files.
+overwritten from the skeleton files.

 .Pp
 .Pp

-When a user's home directory is created, it will be default be as a subdirectory of the
+When a user's home directory is created, it will by default be a subdirectory of the

 .Ar basehome
 .Ar basehome

-directory specified with the
-.Ql Fl b Ar dir
-option (see below), and will be named the same as the account.
-This may be overridden with the
-.Ql Fl d Ar dir
+directory as specified by the
+.Fl b
+option (see below), bearing the name of the new account.
+This can be overridden by the
+.Fl d

 option on the command line, if desired.
 .It Fl k Ar dir
 option on the command line, if desired.
 .It Fl k Ar dir

-Sets the
+Set the

 .Ar skeleton
 .Ar skeleton

-subdirectory, from which the basic startup and configuration files are copied when
+directory, from which basic startup and configuration files are copied when

 the user's home directory is created.
 the user's home directory is created.

-This option only has meaning when used with
-.Ql Fl D
-(see below) or
-.Ql Fl m .
+This option only has meaning when used with the
+.Fl d
+or
+.Fl m
+flags.

 .It Fl s Ar shell
 .It Fl s Ar shell

-Sets or changes the user's login shell to
+Set or changes the user's login shell to

 .Ar shell .
 If the path to the shell program is omitted,
 .Ar shell .
 If the path to the shell program is omitted,

-.Nm pw
+.Nm

 searches the
 .Ar shellpath
 specified in
 searches the
 .Ar shellpath
 specified in


@@ -321,28 +466,19 @@ specified in
 and fills it in as appropriate.
 Note that unless you have a specific reason to do so, you should avoid
 specifying the path - this will allow
 and fills it in as appropriate.
 Note that unless you have a specific reason to do so, you should avoid
 specifying the path - this will allow

-.Nm pw
+.Nm

 to validate that the program exists and is executable.
 Specifying a full path (or supplying a blank "" shell) avoids this check
 and allows for such entries as
 to validate that the program exists and is executable.
 Specifying a full path (or supplying a blank "" shell) avoids this check
 and allows for such entries as

-.Ql \& /nonexistent
+.Pa /nonexistent

 that should be set for accounts not intended for interactive login.
 that should be set for accounts not intended for interactive login.

-.It Fl L Ar class
-Sets the
-.Em class
-field in the user's passwd record.
-This field is not currently used, but will be in the future used to specify a
-.Em termcap
-entry like tag (see
-.Xr passwd 5
-for details).

 .It Fl h Ar fd
 This option provides a special interface by which interactive scripts can
 set an account password using
 .It Fl h Ar fd
 This option provides a special interface by which interactive scripts can
 set an account password using

-.Nm pw .
-Because the command line and environment are fundamental insecure mechanisms
+.Nm .
+Because the command line and environment are fundamentally insecure mechanisms

 by which programs can accept information,
 by which programs can accept information,

-.Nm pw
+.Nm

 will only allow setting of account and group passwords via a file descriptor
 (usually a pipe between an interactive script and the program).
 .Ar sh ,
 will only allow setting of account and group passwords via a file descriptor
 (usually a pipe between an interactive script and the program).
 .Ar sh ,


@@ -350,20 +486,20 @@ will only allow setting of account and group passwords via a file descriptor
 .Ar ksh
 and
 .Ar perl
 .Ar ksh
 and
 .Ar perl

-all posses mechanisms by which this can be done.
+all possess mechanisms by which this can be done.

 Alternatively,
 Alternatively,

-.Nm pw
+.Nm

 will prompt for the user's password if
 will prompt for the user's password if

-.Ql Fl h Ar 0
+.Fl h Ar 0

 is given, nominating
 .Em stdin
 as the file descriptor on which to read the password.
 is given, nominating
 .Em stdin
 as the file descriptor on which to read the password.

-Note that this password will be read once and once only and is intended
-for use by a script or similar rather than interactive use.
+Note that this password will be read only once and is intended
+for use by a script rather than for interactive use.

 If you wish to have new password confirmation along the lines of
 .Xr passwd 1 ,
 If you wish to have new password confirmation along the lines of
 .Xr passwd 1 ,

-this must be implemented as part of the interactive script that calls
-.Nm pw .
+this must be implemented as part of an interactive script that calls
+.Nm .

 .Pp
 If a value of
 .Ql \&-
 .Pp
 If a value of
 .Ql \&-


@@ -371,39 +507,40 @@ is given as the argument
 .Ar fd ,
 then the password will be set to
 .Ql \&* ,
 .Ar fd ,
 then the password will be set to
 .Ql \&* ,

-rendering the account inaccessible via passworded login.
+rendering the account inaccessible via password-based login.

 .El
 .Pp
 It is possible to use
 .Ar useradd
 to create a new account that duplicates an existing user id.
 While this is normally considered an error and will be rejected, the
 .El
 .Pp
 It is possible to use
 .Ar useradd
 to create a new account that duplicates an existing user id.
 While this is normally considered an error and will be rejected, the

-.Ql Fl o
-switch overrides the check for duplicates and allows the duplication of the user id.
-This may be useful if you allow the same user to login under different contexts
-(different group allocations, different home directory, different shell) while
-providing basically the same permissions for access to the user's files in each
-account.
+.Fl o
+option overrides the check for duplicates and allows the duplication of
+the user id.
+This may be useful if you allow the same user to login under
+different contexts (different group allocations, different home
+directory, different shell) while providing basically the same
+permissions for access to the user's files in each account.

 .Pp
 The
 .Ar useradd
 command also has the ability to set new user and group defaults by using the
 .Pp
 The
 .Ar useradd
 command also has the ability to set new user and group defaults by using the

-.Ql Fl D
-switch.
+.Fl D
+option.

 Instead of adding a new user,
 Instead of adding a new user,

-.Nm pw
+.Nm

 writes a new set of defaults to its configuration file,
 .Pa /etc/pw.conf .
 When using the
 writes a new set of defaults to its configuration file,
 .Pa /etc/pw.conf .
 When using the

-.Ql Fl D
-switch, you must not use either
-.Ql Fl n Ar name
+.Fl D
+option, you must not use either
+.Fl n Ar name

 or
 or

-.Ql Fl u Ar uid
+.Fl u Ar uid

 or an error will result.
 Use of
 or an error will result.
 Use of

-.Ql Fl D
-adds switches and changes the meaning of several command line switches in the
+.Fl D
+changes the meaning of several command line switches in the

 .Ar useradd
 command.
 These are:
 .Ar useradd
 command.
 These are:


@@ -412,52 +549,56 @@ These are:
 Set default values in
 .Pa /etc/pw.conf
 configuration file, or a different named configuration file if the
 Set default values in
 .Pa /etc/pw.conf
 configuration file, or a different named configuration file if the

-.Ql Fl C Ar config
-switch is used.
+.Fl C Ar config
+option is used.

 .It Fl b Ar dir
 .It Fl b Ar dir

-Sets the root directory in which user home directories are created.
+Set the root directory in which user home directories are created.

 The default value for this is
 The default value for this is

-.Ql \&/home ,
+.Pa /home ,

 but it may be set elsewhere as desired.
 .It Fl e Ar days
 but it may be set elsewhere as desired.
 .It Fl e Ar days

-Sets the default account expiration period in days.
+Set the default account expiration period in days.

 Unlike use without
 Unlike use without

-.Ql Fl D ,
+.Fl D ,

 the argument must be numeric, which specifies the number of days after creation when
 the account is to expire.
 A value of 0 suppresses automatic calculation of the expiry date.
 .It Fl p Ar days
 the argument must be numeric, which specifies the number of days after creation when
 the account is to expire.
 A value of 0 suppresses automatic calculation of the expiry date.
 .It Fl p Ar days

-Sets the default password expiration period in days.
+Set the default password expiration period in days.

 .It Fl g Ar group
 .It Fl g Ar group

-Sets the default group for new users.
+Set the default group for new users.

 If a blank group is specified using
 If a blank group is specified using

-.Ql Fl g Ar \&"" ,
-then new users will be allocated their own private primary group (a new group created
-with the same name as their login name).
+.Fl g Ar \&"" ,
+then new users will be allocated their own private primary group
+with the same name as their login name.

 If a group is supplied, either its name or uid may be given as an argument.
 .It Fl G Ar grouplist
 If a group is supplied, either its name or uid may be given as an argument.
 .It Fl G Ar grouplist

-Sets the default groups in which new users are made members.
+Set the default groups in which new users are granted membership.

 This is a separate set of groups from the primary group, and you should avoid
 This is a separate set of groups from the primary group, and you should avoid

-nominating the same group as both the primary and in extra groups.
+nominating the same group as both primary and extra groups.

 In other words, these extra groups determine membership in groups
 .Em other than
 the primary group.
 .Ar grouplist
 In other words, these extra groups determine membership in groups
 .Em other than
 the primary group.
 .Ar grouplist

-is a comma-separated list of group names or ids, or a mixture of both, and are always
+is a comma-separated list of group names or ids, and are always

 stored in
 .Pa /etc/pw.conf
 by their symbolic names.
 stored in
 .Pa /etc/pw.conf
 by their symbolic names.

+.It Fl L Ar class
+This option sets the default login class for new users.

 .It Fl k Ar dir
 .It Fl k Ar dir

-Sets the default
+Set the default

 .Em skeleton
 .Em skeleton

-directory, from which prototype shell and other initialisation files are copied when
-.Nm pw
+directory, from which prototype shell and other initialization files are copied when
+.Nm

 creates a user's home directory.
 creates a user's home directory.

-.It Fl u Ar min,max
-.It Fl i Ar min,max
-These switches set the minimum and maximum user and group ids allocated for new accounts
+.It Xo
+.Fl u Ar min , Ns Ar max ,
+.Fl i Ar min , Ns Ar max
+.Xc
+These options set the minimum and maximum user and group ids allocated for new accounts

 and groups created by
 and groups created by

-.Nm pw .
+.Nm .

 The default values for each is 1000 minimum and 32000 maximum.
 .Ar min
 and
 The default values for each is 1000 minimum and 32000 maximum.
 .Ar min
 and


@@ -469,20 +610,20 @@ and numbers greater than 32000 may also be reserved for special purposes (used b
 some system daemons).
 .It Fl w Ar method
 The
 some system daemons).
 .It Fl w Ar method
 The

-.Ql Fl w
-switch sets the default method used to set passwords for newly created user accounts.
+.Fl w
+option sets the default method used to set passwords for newly created user accounts.

 .Ar method
 is one of:
 .Pp
 .Bl -tag -width random -offset indent -compact
 .It no
 .Ar method
 is one of:
 .Pp
 .Bl -tag -width random -offset indent -compact
 .It no

-disables login on newly created accounts
+disable login on newly created accounts

 .It yes
 .It yes

-forces the password to be the account name
+force the password to be the account name

 .It none
 .It none

-forces a blank password
+force a blank password

 .It random
 .It random

-Generates a random password
+generate a random password

 .El
 .Pp
 The
 .El
 .Pp
 The


@@ -490,7 +631,7 @@ The
 or
 .Ql \&no
 methods are the most secure; in the former case,
 or
 .Ql \&no
 methods are the most secure; in the former case,

-.Nm pw
+.Nm

 generates a password and prints it to stdout, which is suitable where you issue
 users with passwords to access their accounts rather than having the user nominate
 their own (possibly poorly chosen) password.
 generates a password and prints it to stdout, which is suitable where you issue
 users with passwords to access their accounts rather than having the user nominate
 their own (possibly poorly chosen) password.


@@ -499,23 +640,36 @@ The
 method requires that the superuser use
 .Xr passwd 1
 to render the account accessible with a password.
 method requires that the superuser use
 .Xr passwd 1
 to render the account accessible with a password.

+.It Fl y Ar path
+This sets the pathname of the database used by
+.Tn NIS
+if you are not sharing
+the information from
+.Pa /etc/master.passwd
+directly with
+.Tn NIS .
+You should only set this option for
+.Tn NIS
+servers.

 .El
 .Pp
 The
 .Ar userdel
 .El
 .Pp
 The
 .Ar userdel

-command has only three valid switches. The
-.Ql Fl n Ar name
+command has only three valid options.
+The
+.Fl n Ar name

 and
 and

-.Ql Fl u Ar uid
-switches have already been covered above.
-The additional switch is:
-.Bl -tag -width flag
+.Fl u Ar uid
+options have already been covered above.
+The additional option is:
+.Bl -tag -width "-G grouplist"

 .It Fl r
 This tells
 .It Fl r
 This tells

-.Nm pw
+.Nm

 to remove the user's home directory and all of its contents.
 to remove the user's home directory and all of its contents.

-.Nm pw
-errs on the side of caution when removing files from the system.
+The
+.Nm
+utility errs on the side of caution when removing files from the system.

 Firstly, it will not do so if the uid of the account being removed is also used by
 another account on the system, and the 'home' directory in the password file is
 a valid path that commences with the character
 Firstly, it will not do so if the uid of the account being removed is also used by
 another account on the system, and the 'home' directory in the password file is
 a valid path that commences with the character


@@ -524,15 +678,15 @@ Secondly, it will only remove files and directories that are actually owned by
 the user, or symbolic links owned by anyone under the user's home directory.
 Finally, after deleting all contents owned by the user only empty directories
 will be removed.
 the user, or symbolic links owned by anyone under the user's home directory.
 Finally, after deleting all contents owned by the user only empty directories
 will be removed.

-If any additional cleanup work is required, this is left to the adminstrator.
+If any additional cleanup work is required, this is left to the administrator.

 .El
 .Pp
 Mail spool files and crontabs are always removed when an account is deleted as these
 are unconditionally attached to the user name.
 Jobs queued for processing by
 .Ar at
 .El
 .Pp
 Mail spool files and crontabs are always removed when an account is deleted as these
 are unconditionally attached to the user name.
 Jobs queued for processing by
 .Ar at

-are also removed if the user's uid is unique (not also used by another account on the
-system).
+are also removed if the user's uid is unique and not also used by another account on the
+system.

 .Pp
 The
 .Ar usershow
 .Pp
 The
 .Ar usershow


@@ -541,56 +695,78 @@ By default, the format is identical to the format used in
 .Pa /etc/master.passwd
 with the password field replaced with a
 .Ql \&* .
 .Pa /etc/master.passwd
 with the password field replaced with a
 .Ql \&* .

-Class, account and password expiration fields will be blank or zero zero unless the user
-running
-.Nm pw
-has root priviledges, as the secure password file where these reside is not accessible
-to non-root users.

 If the
 If the

-.Ql Fl p
-switch is used, then
-.Nm pw
+.Fl P
+option is used, then
+.Nm

 outputs the account details in a more human readable form.
 outputs the account details in a more human readable form.

+If the
+.Fl 7
+option is used, the account details are shown in v7 format.

 The
 The

-.Ql Fl a
-switch lists all users currently on file.
+.Fl a
+option lists all users currently on file.
+Using
+.Fl F
+forces
+.Nm
+to print the details of an account even if it does not exist.

 .Pp
 .Pp

+The command
+.Ar usernext
+returns the next available user and group ids separated by a colon.
+This is normally of interest only to interactive scripts or front-ends
+that use
+.Nm .

 .Sh GROUP OPTIONS
 The
 .Sh GROUP OPTIONS
 The

-.Ql Fl C Ar config
-and
-.Ql Fl q
-options (explained at the start of the previous section) are available with the
-.Ar groupadd
+.Fl C

 and
 and

-.Ar groupmod
-commands.
+.Fl q
+options (explained at the start of the previous section) are available
+with the group manipulation commands.

 Other common options to all group-related commands are:
 Other common options to all group-related commands are:

-.Bl -tag -width "-n name"
+.Bl -tag -width "-m newmembers"

 .It Fl n Ar name
 .It Fl n Ar name

-Specifies the group name.
+Specify the group name.

 .It Fl g Ar gid
 .It Fl g Ar gid

-Specifies the group numeric id.
+Specify the group numeric id.

 .Pp
 .Pp

-As with the account name and id fields, yo uwill usually only need to supply one of
-these, as the group name implies the uid and vice versa.
-You will only need to use both when setting a specific group id against a new group
-or when changing the uid of an existing group.
+As with the account name and id fields, you will usually only need
+to supply one of these, as the group name implies the uid and vice
+versa.
+You will only need to use both when setting a specific group id
+against a new group or when changing the uid of an existing group.
+.It Fl M Ar memberlist
+This option provides an alternative way to add existing users to a
+new group (in groupadd) or replace an existing membership list (in
+groupmod).
+.Ar memberlist
+is a comma separated list of valid and existing user names or uids.
+.It Fl m Ar newmembers
+Similar to
+.Fl M ,
+this option allows the
+.Em addition
+of existing users to a group without replacing the existing list of
+members.
+Login names or user ids may be used, and duplicate users are
+silently eliminated.

 .El
 .Pp
 .Ar groupadd
 also has a
 .El
 .Pp
 .Ar groupadd
 also has a

-.Ql Fl o
-option that allows allocation of an existing group id to new group.
+.Fl o
+option that allows allocation of an existing group id to a new group.

 The default action is to reject an attempt to add a group, and this option overrides
 the check for duplicate group ids.
 There is rarely any need to duplicate a group id.
 .Pp
 The
 .Ar groupmod
 The default action is to reject an attempt to add a group, and this option overrides
 the check for duplicate group ids.
 There is rarely any need to duplicate a group id.
 .Pp
 The
 .Ar groupmod

-command adds one additonal switch:
+command adds one additional option:

 .Pp
 .Pp

-.Bl -tag -width "-l name"
+.Bl -tag -width "-m newmembers"

 .It Fl l Ar name
 This option allows changing of an existing group name to
 .Ql \&name .
 .It Fl l Ar name
 This option allows changing of an existing group name to
 .Ql \&name .


@@ -603,23 +779,147 @@ Options for
 are the same as for
 .Ar usershow ,
 with the
 are the same as for
 .Ar usershow ,
 with the

-.Ql Fl g Ar gid
+.Fl g Ar gid

 replacing
 replacing

-.Ql Fl u Ar uid
+.Fl u Ar uid

 to specify the group id.
 to specify the group id.

+The
+.Fl 7
+option does not apply to the
+.Ar groupshow
+command.
+.Pp
+The command
+.Ar groupnext
+returns the next available group id on standard output.
+.Sh USER LOCKING
+The
+.Nm
+utility
+supports a simple password locking mechanism for users; it works by
+prepending the string
+.Ql *LOCKED*
+to the beginning of the password field in
+.Pa master.passwd
+to prevent successful authentication.

 .Pp
 .Pp

+The
+.Ar lock
+and
+.Ar unlock
+commands take a user name or uid of the account to lock or unlock,
+respectively.  The
+.Fl V ,
+.Fl C ,
+and
+.Fl q
+options as described above are accepted by these commands.
+.Sh DIAGNOSTICS
+The
+.Nm
+utility returns EXIT_SUCCESS on successful operation, otherwise
+.Nm
+returns one of the
+following exit codes defined by
+.Xr sysexits 3
+as follows:
+.Bl -tag -width xxxx
+.It EX_USAGE
+.Bl -bullet -compact
+.It
+Command line syntax errors (invalid keyword, unknown option).
+.El
+.It EX_NOPERM
+.Bl -bullet -compact
+.It
+Attempting to run one of the update modes as non-root.
+.El
+.It EX_OSERR
+.Bl -bullet -compact
+.It
+Memory allocation error.
+.It
+Read error from password file descriptor.
+.El
+.It EX_DATAERR
+.Bl -bullet -compact
+.It
+Bad or invalid data provided or missing on the command line or
+via the password file descriptor.
+.It
+Attempted to remove, rename root account or change its uid.
+.El
+.It EX_OSFILE
+.Bl -bullet -compact
+.It
+Skeleton directory is invalid or does not exist.
+.It
+Base home directory is invalid or does not exist.
+.It
+Invalid or non-existent shell specified.
+.El
+.It EX_NOUSER
+.Bl -bullet -compact
+.It
+User, user id, group or group id specified does not exist.
+.It
+User or group recorded, added, or modified unexpectedly disappeared.
+.El
+.It EX_SOFTWARE
+.Bl -bullet -compact
+.It
+No more group or user ids available within specified range.
+.El
+.It EX_IOERR
+.Bl -bullet -compact
+.It
+Unable to rewrite configuration file.
+.It
+Error updating group or user database files.
+.It
+Update error for passwd or group database files.
+.El
+.It EX_CONFIG
+.Bl -bullet -compact
+.It
+No base home directory configured.
+.El
+.El

 .Sh NOTES
 For a summary of options available with each command, you can use
 .Dl pw [command] help
 For example,
 .Dl pw useradd help
 lists all available options for the useradd operation.
 .Sh NOTES
 For a summary of options available with each command, you can use
 .Dl pw [command] help
 For example,
 .Dl pw useradd help
 lists all available options for the useradd operation.

+.Pp
+The
+.Nm
+utility allows 8-bit characters in the passwd GECOS field (user's full name,
+office, work and home phone number subfields), but disallows them in
+user login and group names.
+Use 8-bit characters with caution, as connection to the Internet will
+require that your mail transport program supports 8BITMIME, and will
+convert headers containing 8-bit characters to 7-bit quoted-printable
+format.
+.Xr sendmail 8
+does support this.
+Use of 8-bit characters in the GECOS field should be used in
+conjunction with the user's default locale and character set
+and should not be implemented without their use.
+Using 8-bit characters may also affect other
+programs that transmit the contents of the GECOS field over the
+Internet, such as
+.Xr fingerd 8 ,
+and a small number of TCP/IP clients, such as IRC, where full names
+specified in the passwd file may be used by default.

 .Sh FILES
 .Bl -tag -width /etc/master.passwd.new -compact
 .It Pa /etc/master.passwd
 The user database
 .Sh FILES
 .Bl -tag -width /etc/master.passwd.new -compact
 .It Pa /etc/master.passwd
 The user database

-.It Pa /etc/passwd 
+.It Pa /etc/passwd

 A Version 7 format password file
 A Version 7 format password file

+.It Pa /etc/login.conf
+The user capabilities database

 .It Pa /etc/group
 The group database
 .It Pa /etc/master.passwd.new
 .It Pa /etc/group
 The group database
 .It Pa /etc/master.passwd.new


@@ -632,17 +932,21 @@ Temporary copy of the group file
 Pw default options file
 .El
 .Sh SEE ALSO
 Pw default options file
 .El
 .Sh SEE ALSO

-.Xr pw.conf 5 ,
-.Xr passwd 1 ,

 .Xr chpass 1 ,
 .Xr chpass 1 ,

-.Xr passwd 5 ,
+.Xr passwd 1 ,

 .Xr group 5 ,
 .Xr group 5 ,

+.Xr login.conf 5 ,
+.Xr passwd 5 ,
+.Xr pw.conf 5 ,

 .Xr pwd_mkdb 8 ,
 .Xr pwd_mkdb 8 ,

-.Xr vipw 5
+.Xr vipw 8

 .Sh HISTORY
 .Sh HISTORY

-.Nm pw
-was written to mimick many of the options used in the Linux
+The
+.Nm
+utility was written to mimic many of the options used in the SYSV

 .Em shadow
 .Em shadow

-suite, but is modified for passwd and group fields specific to
-the BSD 4.4 operating system.
-
+support suite, but is modified for passwd and group fields specific to
+the
+.Bx 4.4
+operating system, and combines all of the major elements
+into a single command.