diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/progressbar.h | 91 | ||||
| -rw-r--r-- | include/tzfile.h | 174 |
2 files changed, 265 insertions, 0 deletions
diff --git a/include/progressbar.h b/include/progressbar.h new file mode 100644 index 0000000..daf382b --- /dev/null +++ b/include/progressbar.h @@ -0,0 +1,91 @@ +/* $NetBSD: progressbar.h,v 1.9 2021/01/06 04:43:14 lukem Exp $ */ + +/*- + * Copyright (c) 1996-2021 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Luke Mewburn. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef STANDALONE_PROGRESS +#include <setjmp.h> +#endif /* !STANDALONE_PROGRESS */ + +#ifndef GLOBAL +#define GLOBAL extern +#endif + + +#define STALLTIME 5 /* # of seconds of no xfer before "stalling" */ + +typedef void (*sigfunc)(int); + + +GLOBAL FILE *ttyout; /* stdout, or stderr if retrieving to stdout */ + +GLOBAL int progress; /* display transfer progress bar */ +GLOBAL int ttywidth; /* width of tty */ + +GLOBAL off_t bytes; /* current # of bytes read */ +GLOBAL off_t filesize; /* size of file being transferred */ +GLOBAL off_t restart_point; /* offset to restart transfer */ +GLOBAL char *prefix; /* Text written left of progress bar */ + + +#ifndef STANDALONE_PROGRESS +GLOBAL int fromatty; /* input is from a terminal */ +GLOBAL int verbose; /* print messages coming back from server */ +GLOBAL int quit_time; /* maximum time to wait if stalled */ + +GLOBAL const char *direction; /* direction transfer is occurring */ + +GLOBAL sigjmp_buf toplevel; /* non-local goto stuff for cmd scanner */ +#endif /* !STANDALONE_PROGRESS */ + +int foregroundproc(void); +void alarmtimer(int); +void progressmeter(int); +sigfunc xsignal(int, sigfunc); + +#ifndef STANDALONE_PROGRESS +void psummary(int); +void ptransfer(int); +#endif /* !STANDALONE_PROGRESS */ + +#ifdef NO_LONG_LONG +# define LLF "%ld" +# define LLFP(x) "%" x "ld" +# define LLT long +# define ULLF "%lu" +# define ULLFP(x) "%" x "lu" +# define ULLT unsigned long +#else +# define LLF "%lld" +# define LLFP(x) "%" x "lld" +# define LLT long long +# define ULLF "%llu" +# define ULLFP(x) "%" x "llu" +# define ULLT unsigned long long +#endif diff --git a/include/tzfile.h b/include/tzfile.h new file mode 100644 index 0000000..5c7a222 --- /dev/null +++ b/include/tzfile.h @@ -0,0 +1,174 @@ +/* $NetBSD: tzfile.h,v 1.10 2019/07/03 15:49:21 christos Exp $ */ + +#ifndef _TZFILE_H_ +#define _TZFILE_H_ + +/* +** This file is in the public domain, so clarified as of +** 1996-06-05 by Arthur David Olson. +*/ + +/* +** This header is for use ONLY with the time conversion code. +** There is no guarantee that it will remain unchanged, +** or that it will remain at all. +** Do NOT copy it to any system include directory. +** Thank you! +*/ + +/* +** Information about time zone files. +*/ + +#ifndef TZDIR /* Time zone object file directory */ +#define TZDIR "/usr/share/zoneinfo" +#endif /* !defined TZDIR */ + +#ifndef TZDEFAULT +#define TZDEFAULT "/etc/localtime" +#endif /* !defined TZDEFAULT */ + +#ifndef TZDEFRULES +#define TZDEFRULES "posixrules" +#endif /* !defined TZDEFRULES */ + + +/* See Internet RFC 8536 for more details about the following format. */ + +/* +** Each file begins with. . . +*/ + +#define TZ_MAGIC "TZif" + +struct tzhead { + char tzh_magic[4]; /* TZ_MAGIC */ + char tzh_version[1]; /* '\0' or '2' or '3' as of 2013 */ + char tzh_reserved[15]; /* reserved; must be zero */ + char tzh_ttisutcnt[4]; /* coded number of trans. time flags */ + char tzh_ttisstdcnt[4]; /* coded number of trans. time flags */ + char tzh_leapcnt[4]; /* coded number of leap seconds */ + char tzh_timecnt[4]; /* coded number of transition times */ + char tzh_typecnt[4]; /* coded number of local time types */ + char tzh_charcnt[4]; /* coded number of abbr. chars */ +}; + +/* +** . . .followed by. . . +** +** tzh_timecnt (char [4])s coded transition times a la time(2) +** tzh_timecnt (unsigned char)s types of local time starting at above +** tzh_typecnt repetitions of +** one (char [4]) coded UT offset in seconds +** one (unsigned char) used to set tm_isdst +** one (unsigned char) that's an abbreviation list index +** tzh_charcnt (char)s '\0'-terminated zone abbreviations +** tzh_leapcnt repetitions of +** one (char [4]) coded leap second transition times +** one (char [4]) total correction after above +** tzh_ttisstdcnt (char)s indexed by type; if 1, transition +** time is standard time, if 0, +** transition time is local (wall clock) +** time; if absent, transition times are +** assumed to be local time +** tzh_ttisutcnt (char)s indexed by type; if 1, transition +** time is UT, if 0, transition time is +** local time; if absent, transition +** times are assumed to be local time. +** When this is 1, the corresponding +** std/wall indicator must also be 1. +*/ + +/* +** If tzh_version is '2' or greater, the above is followed by a second instance +** of tzhead and a second instance of the data in which each coded transition +** time uses 8 rather than 4 chars, +** then a POSIX-TZ-environment-variable-style string for use in handling +** instants after the last transition time stored in the file +** (with nothing between the newlines if there is no POSIX representation for +** such instants). +** +** If tz_version is '3' or greater, the above is extended as follows. +** First, the POSIX TZ string's hour offset may range from -167 +** through 167 as compared to the POSIX-required 0 through 24. +** Second, its DST start time may be January 1 at 00:00 and its stop +** time December 31 at 24:00 plus the difference between DST and +** standard time, indicating DST all year. +*/ + +/* +** In the current implementation, "tzset()" refuses to deal with files that +** exceed any of the limits below. +*/ + +#ifndef TZ_MAX_TIMES +#define TZ_MAX_TIMES 2000 +#endif /* !defined TZ_MAX_TIMES */ + +#ifndef TZ_MAX_TYPES +/* This must be at least 17 for Europe/Samara and Europe/Vilnius. */ +#define TZ_MAX_TYPES 256 /* Limited by what (unsigned char)'s can hold */ +#endif /* !defined TZ_MAX_TYPES */ + +#ifndef TZ_MAX_CHARS +#define TZ_MAX_CHARS 50 /* Maximum number of abbreviation characters */ + /* (limited by what unsigned chars can hold) */ +#endif /* !defined TZ_MAX_CHARS */ + +#ifndef TZ_MAX_LEAPS +#define TZ_MAX_LEAPS 50 /* Maximum number of leap second corrections */ +#endif /* !defined TZ_MAX_LEAPS */ + +#define SECSPERMIN 60 +#define MINSPERHOUR 60 +#define HOURSPERDAY 24 +#define DAYSPERWEEK 7 +#define DAYSPERNYEAR 365 +#define DAYSPERLYEAR 366 +#define SECSPERHOUR (SECSPERMIN * MINSPERHOUR) +#define SECSPERDAY ((int_fast32_t) SECSPERHOUR * HOURSPERDAY) +#define MONSPERYEAR 12 + +#define TM_SUNDAY 0 +#define TM_MONDAY 1 +#define TM_TUESDAY 2 +#define TM_WEDNESDAY 3 +#define TM_THURSDAY 4 +#define TM_FRIDAY 5 +#define TM_SATURDAY 6 + +#define TM_JANUARY 0 +#define TM_FEBRUARY 1 +#define TM_MARCH 2 +#define TM_APRIL 3 +#define TM_MAY 4 +#define TM_JUNE 5 +#define TM_JULY 6 +#define TM_AUGUST 7 +#define TM_SEPTEMBER 8 +#define TM_OCTOBER 9 +#define TM_NOVEMBER 10 +#define TM_DECEMBER 11 + +#define TM_YEAR_BASE 1900 + +#define EPOCH_YEAR 1970 +#define EPOCH_WDAY TM_THURSDAY + +#define isleap(y) (((y) % 4) == 0 && (((y) % 100) != 0 || ((y) % 400) == 0)) + +/* +** Since everything in isleap is modulo 400 (or a factor of 400), we know that +** isleap(y) == isleap(y % 400) +** and so +** isleap(a + b) == isleap((a + b) % 400) +** or +** isleap(a + b) == isleap(a % 400 + b % 400) +** This is true even if % means modulo rather than Fortran remainder +** (which is allowed by C89 but not C99). +** We use this to avoid addition overflow problems. +*/ + +#define isleap_sum(a, b) isleap((a) % 400 + (b) % 400) + +#endif /* !defined _TZFILE_H_ */ |