Further apropos(1) speed optimization was trickier than anticipated.

[mandoc.git] / TODO

************************************************************************
* Official mandoc TODO.
* $Id: TODO,v 1.168 2014/03/30 19:47:48 schwarze Exp $
************************************************************************

************************************************************************
* crashes
************************************************************************

None known.

************************************************************************
* missing features
************************************************************************

--- missing roff features ----------------------------------------------

- .ad (adjust margins)
  .ad l -- adjust left margin only (flush left)
  .ad r -- adjust right margin only (flush right)
  .ad c -- center text on line
  .ad b -- adjust both margins (alias: .ad n)
  .na   -- temporarily disable adjustment without changing the mode
  .ad   -- re-enable adjustment without changing the mode
  Adjustment mode is ignored while in no-fill mode (.nf).

- .fc (field control)
  found by naddy@ in xloadimage(1)
  
- .nr third argument (auto-increment step size, requires \n+)
  found by bentley@ in sbcl(1)  Mon, 9 Dec 2013 18:36:57 -0700

- .ns (no-space mode) occurs in xine-config(1)
  reported by brad@  Sat, 15 Jan 2011 15:45:23 -0500

- .ta (tab settings) occurs in ircbug(1) and probably gnats(1)
  reported by brad@  Sat, 15 Jan 2011 15:50:51 -0500
  also Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100

- .ti (temporary indent)
  found by naddy@ in xloadimage(1)
  found by bentley@ in nmh(1)  Mon, 23 Apr 2012 13:38:28 -0600

- .while and .shift 
  found by jca@ in ratpoison(1)  Sun, 30 Jun 2013 12:01:09 +0200

- \c (interrupted text) should prevent the line break
  even inside .Bd literal; that occurs in chat(8)
  also found in cclive(1) - DocBook output

- \h horizontal move
  found in cclive(1) DocBook output
  Anthony J. Bentley on discuss@  Sat, 21 Sep 2013 22:29:34 -0600

- \n+ and \n- numerical register increment and decrement
  found by bentley@ in sbcl(1)  Mon, 9 Dec 2013 18:36:57 -0700

- \w'' width measurements
  would not be very useful without an expression parser, see below
  needed for Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100

- using undefined strings or macros defines them to be empty
  wl@  Mon, 14 Nov 2011 14:37:01 +0000

- general expression parser, including arithmetics
  to be used at least for .if/.ie and .nr and maybe at other places
  could use J.T.Conklin's PD code in bin/expr/expr.c for inspiration
  needed for Tcl_NewStringObj(3) via wiz@  Wed, 5 Mar 2014 22:27:43 +0100

--- missing mdoc features ----------------------------------------------

- fix bad block nesting involving multiple identical explicit blocks
  see the OpenBSD mdoc_macro.c 1.47 commit message

- .Bl -column .Xo support is missing
  ultimate goal:
  restore .Xr and .Dv to
  lib/libc/compat-43/sigvec.3
  lib/libc/gen/signal.3
  lib/libc/sys/sigaction.2

- edge case: decide how to deal with blk_full bad nesting, e.g.
  .Sh .Nm .Bk .Nm .Ek .Sh found by jmc@ in ssh-keygen(1)
  from jmc@  Wed, 14 Jul 2010 18:10:32 +0100

- \\ is now implemented correctly
  * when defining strings and macros using .ds and .de
  * when parsing roff(7) and man(7) macro arguments
  It does not yet work in mdoc(7) macro arguments
  because libmdoc does not yet use mandoc_getarg().
  Also check what happens in plain text, it must be identical to \e.

- .Bd -filled should not be the same as .Bd -ragged, but align both
  the left and right margin.  In groff, it is implemented in terms
  of .ad b, which we don't have either.  Found in cksum(1).

- implement blank `Bl -column', such as
  .Bl -column
  .It foo Ta bar
  .El

- explicitly disallow nested `Bl -column', which would clobber internal
  flags defined for struct mdoc_macro

- In .Bl -column .It, the end of the line probably has to be regarded
  as an implicit .Ta, if there could be one, see the following mildly
  ugly code from login.conf(5):
    .Bl -column minpasswordlen program xetcxmotd
    .It path Ta path Ta value of Dv _PATH_DEFPATH
    .br
    Default search path.
  reported by Michal Mazurek <akfaew at jasminek dot net>
  via jmc@ Thu, 7 Apr 2011 16:00:53 +0059

- inside `.Bl -column' phrases, punctuation is handled like normal
  text, e.g. `.Bl -column .It Fl x . Ta ...' should give "-x -."

- inside `.Bl -column' phrases, TERMP_IGNDELIM handling by `Pf'
  is not safe, e.g. `.Bl -column .It Pf a b .' gives "ab."
  but should give "ab ."

- set a meaningful default if no `Bl' list type is assigned

- have a blank `It' head for `Bl -tag' not puke

- prohibit `Nm' from having non-text HEAD children
  (e.g., NetBSD mDNSShared/dns-sd.1)
  (mdoc_html.c and mdoc_term.c `Nm' handlers can be slightly simplified)

- When there is free text in the SYNOPSIS and that free text contains
  the .Nm macro, groff somehow understands to treat the .Nm as an in-line
  macro, while mandoc treats it as a block macro and breaks the line.
  No idea how the logic for distinguishing in-line and block instances
  should be, needs investigation.
  uqs@  Thu, 2 Jun 2011 11:03:51 +0200
  uqs@  Thu, 2 Jun 2011 11:33:35 +0200

--- missing man features -----------------------------------------------

- -T[x]html doesn't stipulate non-collapsing spaces in literal mode

--- missing tbl features -----------------------------------------------

- implement basic non-parametric .de to support e.g. sox(1)
  reported by naddy@ Sat, 16 Oct 2010 23:51:57 +0200
  *** sox(1) still doesn't work, tbl(1) errors need investigation

- allow standalone `.' to be interpreted as an end-of-layout
  delimiter instead of being thrown away as a no-op roff line
  reported by Yuri Pankov, Wed 18 May 2011 11:34:59 CEST

--- missing misc features ----------------------------------------------

- italic correction (\/) in PostScript mode
  Werner LEMBERG on groff at gnu dot org  Sun, 10 Nov 2013 12:47:46

- The whatis(1) utility looks for whole words in Nm.
  If the file name of a page does not agree with the contents of any
  of its Nm macros (e.g. pool(9)), add the file name as an Nm entry
  to the mandoc.db as well, such that whatis(1) finds it.
  If there is a page with a file name that does not appear as a substring
  neither in Nm nor in Nd, the same fix would allow finding that page
  with apropos(1) using the file name as a key, as well.
  Issue reported by tedu@  Fri, 05 Jul 2013 21:15:23 -0400

- clean up escape sequence handling, creating three classes:
  (1) fully implemented, or parsed and ignored without loss of content
  (2) unimplemented, potentially causing loss of content
      or serious mangling of formatting (e.g. \n) -> ERROR
      see textproc/mgdiff(1) for nice examples
  (3) undefined, just output the character -> perhaps WARNING

- look at pages generated from reStructeredText, e.g. devel/mercurial hg(1)
  These are a weird mixture of man(7) and custom autogenerated low-level
  roff stuff.  Figure out to what extent we can cope.
  For details, see http://docutils.sourceforge.net/rst.html
  noted by stsp@  Sat, 24 Apr 2010 09:17:55 +0200
  reminded by nicm@  Mon, 3 May 2010 09:52:41 +0100

- look at pages generated from Texinfo source by yat2m, e.g. security/gnupg
  First impression is not that bad.

- check compatibility with Plan9:
  http://swtch.com/usr/local/plan9/tmac/tmac.an
  http://swtch.com/plan9port/man/man7/man.html
  "Anthony J. Bentley" <anthonyjbentley@gmail.com> 28 Dec 2010 21:58:40 -0700

************************************************************************
* formatting issues: ugly output
************************************************************************

- a column list with blank `Ta' cells triggers a spurrious
  start-with-whitespace printing of a newline

- In .Bl -column,
  .It Em Authentication<tab>Key Length
  ought to render "Key Length" with emphasis, too,
  see OpenBSD iked.conf(5).
  reported again Nicolas Joly via wiz@ Wed, 12 Oct 2011 00:20:00 +0200

- empty phrases in .Bl column produce too few blanks
  try e.g. .Bl -column It Ta Ta
  reported by millert Fri, 02 Apr 2010 16:13:46 -0400

- .%T can have trailing punctuation.  Currently, it puts the trailing
  punctuation into a trailing MDOC_TEXT element inside its own scope.
  That element should rather be outside its scope, such that the
  punctuation does not get underlines.  This is not trivial to
  implement because .%T then needs some features of in_line_eoln() -
  slurp all arguments into one single text element - and one feature
  of in_line() - put trailing punctuation out of scope.
  Found in mount_nfs(8) and exports(5), search for "Appendix".

- Trailing punctuation after .%T triggers EOS spacing, at least
  outside .Rs (eek!).  Simply setting ARGSFL_DELIM for .%T is not
  the right solution, it sends mandoc into an endless loop.
  reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100

- in enclosures, mandoc sometimes fancies a bogus end of sentence
  reminded by jmc@  Thu, 23 Sep 2010 18:13:39 +0059

- formatting /usr/local/man/man1/latex2man.1 with groff and mandoc
  reveals lots of bugs both in groff and mandoc...
  reported by bentley@  Wed, 22 May 2013 23:49:30 -0600

************************************************************************
* formatting issues: gratuitous differences
************************************************************************

- .Rv (and probably .Ex) print different text if an `Nm' has been named
  or not (run a manual without `Nm blah' to see this).  I'm not sure
  that this exists in the wild, but it's still an error.

- In .Bl -bullet, the groff bullet is "+\b+\bo\bo", the mandoc bullet
  is just "o\bo".
  see for example OpenBSD ksh(1)

- .Pp between two .It in .Bl -column should produce one,
  not two blank lines, see e.g. login.conf(5).
  reported by jmc@  Sun, 17 Apr 2011 14:04:58 +0059
  reported again by sthen@  Wed, 18 Jan 2012 02:09:39 +0000 (UTC)

- If the *first* line after .It is .Pp, break the line right after
  the tag, do not pad with space characters before breaking.
  See the description of the a, c, and i commands in sed(1).

- If the first line after .It is .D1, do not assert a blank line
  in between, see for example tmux(1).
  reported by nicm@  13 Jan 2011 00:18:57 +0000

- Trailing punctuation after .It should trigger EOS spacing.
  reported by Nicolas Joly  Sat, 17 Nov 2012 11:49:54 +0100
  Probably, this should be fixed somewhere in termp_it_pre(), not sure.

- .Nx 1.0a
  should be "NetBSD 1.0A", not "NetBSD 1.0a",
  see OpenBSD ccdconfig(8).

- In .Bl -tag, if a tag exceeds the right margin and must be continued
  on the next line, it must be indented by -width, not width+1;
  see "rule block|pass" in OpenBSD ifconfig(8).

- When the -width string contains macros, the macros must be rendered
  before measuring the width, for example
    .Bl -tag -width ".Dv message"
  in magic(5), located in src/usr.bin/file, is the same
  as -width 7n, not -width 11n.
  The same applies to .Bl -column column widths;
  reported again by Nicolas Joly Thu, 1 Mar 2012 13:41:26 +0100 via wiz@ 5 Mar
  reported again by Franco Fichtner Fri, 27 Sep 2013 21:02:28 +0200
  An easy partial fix would be to just skip the first word if it starts
  with a dot, including any following white space, when measuring.

- The \& zero-width character counts as output.
  That is, when it is alone on a line between two .Pp,
  we want three blank lines, not two as in mandoc.

- Header lines of excessive length:
  Port OpenBSD man_term.c rev. 1.25 to mdoc_term.c
  and document it in mdoc(7) and man(7) COMPATIBILITY
  found while talking to Chris Bennett

- trailing whitespace must be ignored even when followed by a font escape,
  see for example 
    makes
    \fBdig \fR
    operate in batch mode
  in dig(1).

************************************************************************
* warning issues
************************************************************************

- check that MANDOCERR_BADTAB is thrown in the right cases,
  i.e. when finding a literal tab character in fill mode,
  and possibly change the wording of the warning message
  to refer to fill mode, not literal mode
  See the mail from Werner LEMBERG on the groff list,
  Fri, 14 Feb 2014 18:54:42 +0100 (CET)

************************************************************************
* performance issues
************************************************************************

Several areas can be cleaned up to make mandoc even faster.  These are 

- improve hashing mechanism for macros (quite important: performance)

- improve hashing mechanism for characters (not as important)

- the PDF file is HUGE: this can be reduced by using relative offsets

- instead of re-initialising the roff predefined-strings set before each
  parse, create a read-only version the first time and copy it 

************************************************************************
* structural issues
************************************************************************

- We use the input line number at several places to distinguish
  same-line from different-line input.  That plainly doesn't work
  with user-defined macros, leading to random breakage.

- Find better ways to prevent endless loops
  in roff(7) macro and string expansion.
 
- Finish cleanup of date handling.
  Decide which formats should be recognized where.
  Update both mdoc(7) and man(7) documentation.
  Triggered by  Tim van der Molen  Tue, 22 Feb 2011 20:30:45 +0100